diff mbox series

i2c: tegra: use i2c_timings for bus clock freq

Message ID 1639057668-14377-1-git-send-email-akhilrajeev@nvidia.com
State Accepted
Commit 50665d58db052b04f640fd54de1632aeecd4fc77
Headers show
Series i2c: tegra: use i2c_timings for bus clock freq | expand

Commit Message

Akhil R Dec. 9, 2021, 1:47 p.m. UTC
Use i2c_timings struct and corresponding methods to get bus clock frequency

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
---
 drivers/i2c/busses/i2c-tegra.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

The patch is in response to the discussion in a previous patch to use
i2c_timings struct for bus freq.
ref. https://lkml.org/lkml/2021/11/25/767
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a5be8f0..ffd2ad2 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -246,7 +246,7 @@  struct tegra_i2c_hw_feature {
  * @msg_buf: pointer to current message data
  * @msg_buf_remaining: size of unsent data in the message buffer
  * @msg_read: indicates that the transfer is a read access
- * @bus_clk_rate: current I2C bus clock rate
+ * @timings: i2c timings information like bus frequency
  * @multimaster_mode: indicates that I2C controller is in multi-master mode
  * @tx_dma_chan: DMA transmit channel
  * @rx_dma_chan: DMA receive channel
@@ -273,7 +273,7 @@  struct tegra_i2c_dev {
 	unsigned int nclocks;
 
 	struct clk *div_clk;
-	u32 bus_clk_rate;
+	struct i2c_timings timings;
 
 	struct completion msg_complete;
 	size_t msg_buf_remaining;
@@ -642,14 +642,14 @@  static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	if (i2c_dev->is_vi)
 		tegra_i2c_vi_init(i2c_dev);
 
-	switch (i2c_dev->bus_clk_rate) {
+	switch (i2c_dev->timings.bus_freq_hz) {
 	case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:
 	default:
 		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
 		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
 		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
 
-		if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ)
+		if (i2c_dev->timings.bus_freq_hz > I2C_MAX_FAST_MODE_FREQ)
 			non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;
 		else
 			non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
@@ -685,7 +685,7 @@  static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 	clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1);
 
 	err = clk_set_rate(i2c_dev->div_clk,
-			   i2c_dev->bus_clk_rate * clk_multiplier);
+			   i2c_dev->timings.bus_freq_hz * clk_multiplier);
 	if (err) {
 		dev_err(i2c_dev->dev, "failed to set div-clk rate: %d\n", err);
 		return err;
@@ -724,7 +724,7 @@  static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
 	 * before disabling the controller so that the STOP condition has
 	 * been delivered properly.
 	 */
-	udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
+	udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->timings.bus_freq_hz));
 
 	cnfg = i2c_readl(i2c_dev, I2C_CNFG);
 	if (cnfg & I2C_CNFG_PACKET_MODE_EN)
@@ -1254,7 +1254,7 @@  static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	 * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits
 	 */
 	xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
-				       i2c_dev->bus_clk_rate);
+				       i2c_dev->timings.bus_freq_hz);
 
 	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
@@ -1633,10 +1633,7 @@  static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
 	bool multi_mode;
 	int err;
 
-	err = device_property_read_u32(i2c_dev->dev, "clock-frequency",
-				       &i2c_dev->bus_clk_rate);
-	if (err)
-		i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
+	i2c_parse_fw_timings(i2c_dev->dev, &i2c_dev->timings, true);
 
 	multi_mode = device_property_read_bool(i2c_dev->dev, "multi-master");
 	i2c_dev->multimaster_mode = multi_mode;