diff mbox series

[1/7] ASoC: SOF: Intel: ICL: move ICL-specific ops to icl.c

Message ID 20211207193947.71080-2-pierre-louis.bossart@linux.intel.com
State New
Headers show
Series ASoC: Intel: SOF: clarifications on hardware support | expand

Commit Message

Pierre-Louis Bossart Dec. 7, 2021, 7:39 p.m. UTC 
From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

Move the ICL specific ops to icl.c. Also introduce a
macro ICL_DSP_HPRO_CORE_ID to define the core that
should be powered up when HPRO is enabled.

Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/sof/intel/hda-loader.c | 64 ------------------------------
 sound/soc/sof/intel/hda.h        |  2 -
 sound/soc/sof/intel/icl.c        | 67 +++++++++++++++++++++++++++++++-
 3 files changed, 65 insertions(+), 68 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index 40201e5ac201..bfb0e374ebab 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -481,49 +481,6 @@  int hda_dsp_post_fw_run(struct snd_sof_dev *sdev)
 	return hda_dsp_ctrl_clock_power_gating(sdev, true);
 }
 
-/*
- * post fw run operations for ICL,
- * Core 3 will be powered up and in stall when HPRO is enabled
- */
-int hda_dsp_post_fw_run_icl(struct snd_sof_dev *sdev)
-{
-	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
-	int ret;
-
-	if (sdev->first_boot) {
-		ret = hda_sdw_startup(sdev);
-		if (ret < 0) {
-			dev_err(sdev->dev,
-				"error: could not startup SoundWire links\n");
-			return ret;
-		}
-	}
-
-	hda_sdw_int_enable(sdev, true);
-
-	/*
-	 * The recommended HW programming sequence for ICL is to
-	 * power up core 3 and keep it in stall if HPRO is enabled.
-	 * Major difference between ICL and TGL, on ICL core 3 is managed by
-	 * the host whereas on TGL it is handled by the firmware.
-	 */
-	if (!hda->clk_config_lpro) {
-		ret = hda_dsp_enable_core(sdev, BIT(3));
-		if (ret < 0) {
-			dev_err(sdev->dev, "error: dsp core power up failed on core 3\n");
-			return ret;
-		}
-
-		sdev->enabled_cores_mask |= BIT(3);
-		sdev->dsp_core_ref_count[3]++;
-
-		snd_sof_dsp_stall(sdev, BIT(3));
-	}
-
-	/* re-enable clock gating and power gating */
-	return hda_dsp_ctrl_clock_power_gating(sdev, true);
-}
-
 int hda_dsp_ext_man_get_cavs_config_data(struct snd_sof_dev *sdev,
 					 const struct sof_ext_man_elem_header *hdr)
 {
@@ -561,24 +518,3 @@  int hda_dsp_ext_man_get_cavs_config_data(struct snd_sof_dev *sdev,
 
 	return 0;
 }
-
-int hda_dsp_core_stall_icl(struct snd_sof_dev *sdev, unsigned int core_mask)
-{
-	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
-	const struct sof_intel_dsp_desc *chip = hda->desc;
-
-	/* make sure core_mask in host managed cores */
-	core_mask &= chip->host_managed_cores_mask;
-	if (!core_mask) {
-		dev_err(sdev->dev, "error: core_mask is not in host managed cores\n");
-		return -EINVAL;
-	}
-
-	/* stall core */
-	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
-					 HDA_DSP_REG_ADSPCS,
-					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
-					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
-
-	return 0;
-}
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index 72e78c449aa8..e2055b6c8139 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -618,8 +618,6 @@  int hda_dsp_cl_boot_firmware_iccmax(struct snd_sof_dev *sdev);
 /* pre and post fw run ops */
 int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev);
 int hda_dsp_post_fw_run(struct snd_sof_dev *sdev);
-int hda_dsp_post_fw_run_icl(struct snd_sof_dev *sdev);
-int hda_dsp_core_stall_icl(struct snd_sof_dev *sdev, unsigned int core_mask);
 
 /* parse platform specific ext manifest ops */
 int hda_dsp_ext_man_get_cavs_config_data(struct snd_sof_dev *sdev,
diff --git a/sound/soc/sof/intel/icl.c b/sound/soc/sof/intel/icl.c
index 343c1af7c453..f75e3983969f 100644
--- a/sound/soc/sof/intel/icl.c
+++ b/sound/soc/sof/intel/icl.c
@@ -18,12 +18,75 @@ 
 #include "hda-ipc.h"
 #include "../sof-audio.h"
 
+#define ICL_DSP_HPRO_CORE_ID 3
+
 static const struct snd_sof_debugfs_map icl_dsp_debugfs[] = {
 	{"hda", HDA_DSP_HDA_BAR, 0, 0x4000, SOF_DEBUGFS_ACCESS_ALWAYS},
 	{"pp", HDA_DSP_PP_BAR,  0, 0x1000, SOF_DEBUGFS_ACCESS_ALWAYS},
 	{"dsp", HDA_DSP_BAR,  0, 0x10000, SOF_DEBUGFS_ACCESS_ALWAYS},
 };
 
+static int icl_dsp_core_stall(struct snd_sof_dev *sdev, unsigned int core_mask)
+{
+	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+	const struct sof_intel_dsp_desc *chip = hda->desc;
+
+	/* make sure core_mask in host managed cores */
+	core_mask &= chip->host_managed_cores_mask;
+	if (!core_mask) {
+		dev_err(sdev->dev, "error: core_mask is not in host managed cores\n");
+		return -EINVAL;
+	}
+
+	/* stall core */
+	snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPCS,
+					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask),
+					 HDA_DSP_ADSPCS_CSTALL_MASK(core_mask));
+
+	return 0;
+}
+
+/*
+ * post fw run operation for ICL.
+ * Core 3 will be powered up and in stall when HPRO is enabled
+ */
+static int icl_dsp_post_fw_run(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+	int ret;
+
+	if (sdev->first_boot) {
+		ret = hda_sdw_startup(sdev);
+		if (ret < 0) {
+			dev_err(sdev->dev, "error: could not startup SoundWire links\n");
+			return ret;
+		}
+	}
+
+	hda_sdw_int_enable(sdev, true);
+
+	/*
+	 * The recommended HW programming sequence for ICL is to
+	 * power up core 3 and keep it in stall if HPRO is enabled.
+	 */
+	if (!hda->clk_config_lpro) {
+		ret = hda_dsp_enable_core(sdev, BIT(ICL_DSP_HPRO_CORE_ID));
+		if (ret < 0) {
+			dev_err(sdev->dev, "error: dsp core power up failed on core %d\n",
+				ICL_DSP_HPRO_CORE_ID);
+			return ret;
+		}
+
+		sdev->enabled_cores_mask |= BIT(ICL_DSP_HPRO_CORE_ID);
+		sdev->dsp_core_ref_count[ICL_DSP_HPRO_CORE_ID]++;
+
+		snd_sof_dsp_stall(sdev, BIT(ICL_DSP_HPRO_CORE_ID));
+	}
+
+	/* re-enable clock gating and power gating */
+	return hda_dsp_ctrl_clock_power_gating(sdev, true);
+}
+
 /* Icelake ops */
 const struct snd_sof_dsp_ops sof_icl_ops = {
 	/* probe/remove/shutdown */
@@ -93,7 +156,7 @@  const struct snd_sof_dsp_ops sof_icl_ops = {
 
 	/* pre/post fw run */
 	.pre_fw_run = hda_dsp_pre_fw_run,
-	.post_fw_run = hda_dsp_post_fw_run_icl,
+	.post_fw_run = icl_dsp_post_fw_run,
 
 	/* parse platform specific extended manifest */
 	.parse_platform_ext_manifest = hda_dsp_ext_man_get_cavs_config_data,
@@ -103,7 +166,7 @@  const struct snd_sof_dsp_ops sof_icl_ops = {
 
 	/* firmware run */
 	.run = hda_dsp_cl_boot_firmware_iccmax,
-	.stall = hda_dsp_core_stall_icl,
+	.stall = icl_dsp_core_stall,
 
 	/* trace callback */
 	.trace_init = hda_dsp_trace_init,