diff mbox series

[02/10] scsi: ufs: qcom: move ICE functionality to common library

Message ID 20211206225725.77512-3-quic_gaurkash@quicinc.com
State New
Headers show
Series Add wrapped key support for Qualcomm ICE | expand

Commit Message

Gaurav Kashyap (QUIC) Dec. 6, 2021, 10:57 p.m. UTC
Remove the ICE support in UFS and use the shared library
for crypto functionality.

Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>
---
 drivers/scsi/ufs/Kconfig        |   1 +
 drivers/scsi/ufs/ufs-qcom-ice.c | 169 +++-----------------------------
 drivers/scsi/ufs/ufs-qcom.h     |   3 +-
 3 files changed, 15 insertions(+), 158 deletions(-)

Comments

Eric Biggers Dec. 14, 2021, 12:40 a.m. UTC | #1
On Mon, Dec 06, 2021 at 02:57:17PM -0800, Gaurav Kashyap wrote:
> Remove the ICE support in UFS and use the shared library
> for crypto functionality.
> 
> Signed-off-by: Gaurav Kashyap <quic_gaurkash@quicinc.com>

Can you reword this to make it clear that this patch isn't removing ICE support
from the UFS driver, but rather just refactoring how it is implemented?

Also please make sure to clearly describe any changes in behavior, or else
reorder the patchset so that no behavior is changed until after the conversion.
There are some behavior changes that I pointed out on the previous patch.

- Eric
diff mbox series

Patch

diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 432df76e6318..622a4c3fbf70 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -101,6 +101,7 @@  config SCSI_UFS_QCOM
 	tristate "QCOM specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
 	select QCOM_SCM if SCSI_UFS_CRYPTO
+	select QTI_ICE_COMMON if SCSI_UFS_CRYPTO
 	select RESET_CONTROLLER
 	help
 	  This selects the QCOM specific additions to UFSHCD platform driver.
diff --git a/drivers/scsi/ufs/ufs-qcom-ice.c b/drivers/scsi/ufs/ufs-qcom-ice.c
index bbb0ad7590ec..3826643bf537 100644
--- a/drivers/scsi/ufs/ufs-qcom-ice.c
+++ b/drivers/scsi/ufs/ufs-qcom-ice.c
@@ -8,90 +8,11 @@ 
 
 #include <linux/platform_device.h>
 #include <linux/qcom_scm.h>
+#include <linux/qti-ice-common.h>
 
 #include "ufshcd-crypto.h"
 #include "ufs-qcom.h"
 
-#define AES_256_XTS_KEY_SIZE			64
-
-/* QCOM ICE registers */
-
-#define QCOM_ICE_REG_CONTROL			0x0000
-#define QCOM_ICE_REG_RESET			0x0004
-#define QCOM_ICE_REG_VERSION			0x0008
-#define QCOM_ICE_REG_FUSE_SETTING		0x0010
-#define QCOM_ICE_REG_PARAMETERS_1		0x0014
-#define QCOM_ICE_REG_PARAMETERS_2		0x0018
-#define QCOM_ICE_REG_PARAMETERS_3		0x001C
-#define QCOM_ICE_REG_PARAMETERS_4		0x0020
-#define QCOM_ICE_REG_PARAMETERS_5		0x0024
-
-/* QCOM ICE v3.X only */
-#define QCOM_ICE_GENERAL_ERR_STTS		0x0040
-#define QCOM_ICE_INVALID_CCFG_ERR_STTS		0x0030
-#define QCOM_ICE_GENERAL_ERR_MASK		0x0044
-
-/* QCOM ICE v2.X only */
-#define QCOM_ICE_REG_NON_SEC_IRQ_STTS		0x0040
-#define QCOM_ICE_REG_NON_SEC_IRQ_MASK		0x0044
-
-#define QCOM_ICE_REG_NON_SEC_IRQ_CLR		0x0048
-#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME1	0x0050
-#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME2	0x0054
-#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME1	0x0058
-#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME2	0x005C
-#define QCOM_ICE_REG_STREAM1_BIST_ERROR_VEC	0x0060
-#define QCOM_ICE_REG_STREAM2_BIST_ERROR_VEC	0x0064
-#define QCOM_ICE_REG_STREAM1_BIST_FINISH_VEC	0x0068
-#define QCOM_ICE_REG_STREAM2_BIST_FINISH_VEC	0x006C
-#define QCOM_ICE_REG_BIST_STATUS		0x0070
-#define QCOM_ICE_REG_BYPASS_STATUS		0x0074
-#define QCOM_ICE_REG_ADVANCED_CONTROL		0x1000
-#define QCOM_ICE_REG_ENDIAN_SWAP		0x1004
-#define QCOM_ICE_REG_TEST_BUS_CONTROL		0x1010
-#define QCOM_ICE_REG_TEST_BUS_REG		0x1014
-
-/* BIST ("built-in self-test"?) status flags */
-#define QCOM_ICE_BIST_STATUS_MASK		0xF0000000
-
-#define QCOM_ICE_FUSE_SETTING_MASK		0x1
-#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK	0x2
-#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK	0x4
-
-#define qcom_ice_writel(host, val, reg)	\
-	writel((val), (host)->ice_mmio + (reg))
-#define qcom_ice_readl(host, reg)	\
-	readl((host)->ice_mmio + (reg))
-
-static bool qcom_ice_supported(struct ufs_qcom_host *host)
-{
-	struct device *dev = host->hba->dev;
-	u32 regval = qcom_ice_readl(host, QCOM_ICE_REG_VERSION);
-	int major = regval >> 24;
-	int minor = (regval >> 16) & 0xFF;
-	int step = regval & 0xFFFF;
-
-	/* For now this driver only supports ICE version 3. */
-	if (major != 3) {
-		dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
-			 major, minor, step);
-		return false;
-	}
-
-	dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
-		 major, minor, step);
-
-	/* If fuses are blown, ICE might not work in the standard way. */
-	regval = qcom_ice_readl(host, QCOM_ICE_REG_FUSE_SETTING);
-	if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
-		      QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
-		      QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
-		dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
-		return false;
-	}
-	return true;
-}
-
 int ufs_qcom_ice_init(struct ufs_qcom_host *host)
 {
 	struct ufs_hba *hba = host->hba;
@@ -115,14 +36,14 @@  int ufs_qcom_ice_init(struct ufs_qcom_host *host)
 		goto disable;
 	}
 
-	host->ice_mmio = devm_ioremap_resource(dev, res);
-	if (IS_ERR(host->ice_mmio)) {
-		err = PTR_ERR(host->ice_mmio);
+	host->ice_data.ice_mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(host->ice_data.ice_mmio)) {
+		err = PTR_ERR(host->ice_data.ice_mmio);
 		dev_err(dev, "Failed to map ICE registers; err=%d\n", err);
 		return err;
 	}
 
-	if (!qcom_ice_supported(host))
+	if (qti_ice_init(&host->ice_data))
 		goto disable;
 
 	return 0;
@@ -133,71 +54,21 @@  int ufs_qcom_ice_init(struct ufs_qcom_host *host)
 	return 0;
 }
 
-static void qcom_ice_low_power_mode_enable(struct ufs_qcom_host *host)
-{
-	u32 regval;
-
-	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
-	/*
-	 * Enable low power mode sequence
-	 * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
-	 */
-	regval |= 0x7000;
-	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
-}
-
-static void qcom_ice_optimization_enable(struct ufs_qcom_host *host)
-{
-	u32 regval;
-
-	/* ICE Optimizations Enable Sequence */
-	regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL);
-	regval |= 0xD807100;
-	/* ICE HPG requires delay before writing */
-	udelay(5);
-	qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
-	udelay(5);
-}
 
 int ufs_qcom_ice_enable(struct ufs_qcom_host *host)
 {
 	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
 		return 0;
-	qcom_ice_low_power_mode_enable(host);
-	qcom_ice_optimization_enable(host);
-	return ufs_qcom_ice_resume(host);
-}
 
-/* Poll until all BIST bits are reset */
-static int qcom_ice_wait_bist_status(struct ufs_qcom_host *host)
-{
-	int count;
-	u32 reg;
-
-	for (count = 0; count < 100; count++) {
-		reg = qcom_ice_readl(host, QCOM_ICE_REG_BIST_STATUS);
-		if (!(reg & QCOM_ICE_BIST_STATUS_MASK))
-			break;
-		udelay(50);
-	}
-	if (reg)
-		return -ETIMEDOUT;
-	return 0;
+	return qti_ice_enable(&host->ice_data);
 }
 
 int ufs_qcom_ice_resume(struct ufs_qcom_host *host)
 {
-	int err;
-
 	if (!(host->hba->caps & UFSHCD_CAP_CRYPTO))
 		return 0;
 
-	err = qcom_ice_wait_bist_status(host);
-	if (err) {
-		dev_err(host->hba->dev, "BIST status error (%d)\n", err);
-		return err;
-	}
-	return 0;
+	return qti_ice_resume(&host->ice_data);
 }
 
 /*
@@ -208,15 +79,10 @@  int ufs_qcom_ice_program_key(struct ufs_hba *hba,
 			     const union ufs_crypto_cfg_entry *cfg, int slot)
 {
 	union ufs_crypto_cap_entry cap;
-	union {
-		u8 bytes[AES_256_XTS_KEY_SIZE];
-		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
-	} key;
-	int i;
-	int err;
+	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
 	if (!(cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE))
-		return qcom_scm_ice_invalidate_key(slot);
+		return qti_ice_keyslot_evict(slot);
 
 	/* Only AES-256-XTS has been tested so far. */
 	cap = hba->crypto_cap_array[cfg->crypto_cap_idx];
@@ -228,18 +94,7 @@  int ufs_qcom_ice_program_key(struct ufs_hba *hba,
 		return -EINVAL;
 	}
 
-	memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE);
-
-	/*
-	 * The SCM call byte-swaps the 32-bit words of the key.  So we have to
-	 * do the same, in order for the final key be correct.
-	 */
-	for (i = 0; i < ARRAY_SIZE(key.words); i++)
-		__cpu_to_be32s(&key.words[i]);
-
-	err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
-				   QCOM_SCM_ICE_CIPHER_AES_256_XTS,
-				   cfg->data_unit_size);
-	memzero_explicit(&key, sizeof(key));
-	return err;
+	return qti_ice_keyslot_program(&host->ice_data, cfg->crypto_key,
+				       UFS_CRYPTO_KEY_SIZE_256, slot,
+				       cfg->data_unit_size, cfg->crypto_cap_idx);
 }
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index 8208e3a3ef59..8efacc0d7888 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -7,6 +7,7 @@ 
 
 #include <linux/reset-controller.h>
 #include <linux/reset.h>
+#include <linux/qti-ice-common.h>
 
 #define MAX_UFS_QCOM_HOSTS	1
 #define MAX_U32                 (~(u32)0)
@@ -206,7 +207,7 @@  struct ufs_qcom_host {
 	bool is_dev_ref_clk_enabled;
 	struct ufs_hw_version hw_ver;
 #ifdef CONFIG_SCSI_UFS_CRYPTO
-	void __iomem *ice_mmio;
+	struct ice_mmio_data ice_data;
 #endif
 
 	u32 dev_ref_clk_en_mask;