diff mbox series

[v3,2/7] dt-bindings: clock: Document Exynos7885 CMU bindings

Message ID 20211205230804.202292-3-virag.david003@gmail.com
State Superseded
Headers show
Series Initial Samsung Galaxy A8 (2018) support | expand

Commit Message

David Virag Dec. 5, 2021, 11:07 p.m. UTC 
Provide dt-schema documentation for Exynos7885 SoC clock controller.
Description is modified from Exynos850 clock controller documentation as
I couldn't describe it any better, that was written by Sam Protsenko.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David Virag <virag.david003@gmail.com>
---
Changes in v2:
  - Fixed double : in description
  - Added R-b tag by Krzysztof Kozlowski

Changes in v3:
  - Nothing

 .../clock/samsung,exynos7885-clock.yaml       | 166 ++++++++++++++++++
 1 file changed, 166 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml

Comments

Rob Herring Dec. 6, 2021, 2:25 p.m. UTC | #1 
On Mon, 06 Dec 2021 00:07:56 +0100, David Virag wrote:
> Provide dt-schema documentation for Exynos7885 SoC clock controller.
> Description is modified from Exynos850 clock controller documentation as
> I couldn't describe it any better, that was written by Sam Protsenko.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> Signed-off-by: David Virag <virag.david003@gmail.com>
> ---
> Changes in v2:
>   - Fixed double : in description
>   - Added R-b tag by Krzysztof Kozlowski
> 
> Changes in v3:
>   - Nothing
> 
>  .../clock/samsung,exynos7885-clock.yaml       | 166 ++++++++++++++++++
>  1 file changed, 166 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.example.dts:21.47-46.11: Warning (unit_address_format): /example-0/clock-controller@0x10010000: unit name should not have leading "0x"
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.example.dt.yaml: example-0: 'clock-controller@0x10010000' does not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/dt-core.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1563783

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 000000000000..63f95d6ec190
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,166 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@0x10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...