diff mbox series

[v2,12/14] dt-bindings: ata: Convert Broadcom SATA to YAML

Message ID 20211206182616.2089677-13-f.fainelli@gmail.com
State Accepted
Commit fb6739251cdf10c4b2c3ccecaf73e07a97466997
Headers show
Series [v2,01/14] dt-bindings: mmc: Convert Broadcom STB SDHCI binding to YAML | expand

Commit Message

Florian Fainelli Dec. 6, 2021, 6:26 p.m. UTC
Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML
to help with validation.

Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/ata/brcm,sata-brcm.txt           | 45 ---------
 .../bindings/ata/brcm,sata-brcm.yaml          | 91 +++++++++++++++++++
 2 files changed, 91 insertions(+), 45 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
 create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml

Comments

Rob Herring (Arm) Dec. 7, 2021, 2:58 p.m. UTC | #1
On Mon, 06 Dec 2021 10:26:14 -0800, Florian Fainelli wrote:
> Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML
> to help with validation.
> 
> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  .../bindings/ata/brcm,sata-brcm.txt           | 45 ---------
>  .../bindings/ata/brcm,sata-brcm.yaml          | 91 +++++++++++++++++++
>  2 files changed, 91 insertions(+), 45 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
>  create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1564108


ahci@41000: $nodename:0: 'ahci@41000' does not match '^sata(@.*)?$'
	arch/arm/boot/dts/bcm958522er.dt.yaml
	arch/arm/boot/dts/bcm958525er.dt.yaml
	arch/arm/boot/dts/bcm958525xmc.dt.yaml
	arch/arm/boot/dts/bcm958622hr.dt.yaml
	arch/arm/boot/dts/bcm958623hr.dt.yaml
	arch/arm/boot/dts/bcm958625hr.dt.yaml
	arch/arm/boot/dts/bcm958625k.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx64.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx64w.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx65.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx65w.dt.yaml
	arch/arm/boot/dts/bcm988312hr.dt.yaml

ahci@41000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'dma-coherent', 'sata-port@0', 'sata-port@1' were unexpected)
	arch/arm/boot/dts/bcm958522er.dt.yaml
	arch/arm/boot/dts/bcm958525er.dt.yaml
	arch/arm/boot/dts/bcm958525xmc.dt.yaml
	arch/arm/boot/dts/bcm958622hr.dt.yaml
	arch/arm/boot/dts/bcm958623hr.dt.yaml
	arch/arm/boot/dts/bcm958625hr.dt.yaml
	arch/arm/boot/dts/bcm958625k.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx64.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx64w.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx65.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx65w.dt.yaml
	arch/arm/boot/dts/bcm988312hr.dt.yaml

ahci@41000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'sata-port@0', 'sata-port@1' were unexpected)
	arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dt.yaml
	arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dt.yaml

sata@a000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/bcm963138dvt.dt.yaml
Florian Fainelli Dec. 7, 2021, 6:28 p.m. UTC | #2
On 12/7/21 6:58 AM, Rob Herring wrote:
> On Mon, 06 Dec 2021 10:26:14 -0800, Florian Fainelli wrote:
>> Convert the Broadcom SATA3 AHCI controller Device Tree binding to YAML
>> to help with validation.
>>
>> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> ---
>>  .../bindings/ata/brcm,sata-brcm.txt           | 45 ---------
>>  .../bindings/ata/brcm,sata-brcm.yaml          | 91 +++++++++++++++++++
>>  2 files changed, 91 insertions(+), 45 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
>>  create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
>>
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/1564108
> 
> 
> ahci@41000: $nodename:0: 'ahci@41000' does not match '^sata(@.*)?$'
> 	arch/arm/boot/dts/bcm958522er.dt.yaml
> 	arch/arm/boot/dts/bcm958525er.dt.yaml
> 	arch/arm/boot/dts/bcm958525xmc.dt.yaml
> 	arch/arm/boot/dts/bcm958622hr.dt.yaml
> 	arch/arm/boot/dts/bcm958623hr.dt.yaml
> 	arch/arm/boot/dts/bcm958625hr.dt.yaml
> 	arch/arm/boot/dts/bcm958625k.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx64.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx64w.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx65.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx65w.dt.yaml
> 	arch/arm/boot/dts/bcm988312hr.dt.yaml
> 
> ahci@41000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'dma-coherent', 'sata-port@0', 'sata-port@1' were unexpected)
> 	arch/arm/boot/dts/bcm958522er.dt.yaml
> 	arch/arm/boot/dts/bcm958525er.dt.yaml
> 	arch/arm/boot/dts/bcm958525xmc.dt.yaml
> 	arch/arm/boot/dts/bcm958622hr.dt.yaml
> 	arch/arm/boot/dts/bcm958623hr.dt.yaml
> 	arch/arm/boot/dts/bcm958625hr.dt.yaml
> 	arch/arm/boot/dts/bcm958625k.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx64.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx64w.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx65.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx65w.dt.yaml
> 	arch/arm/boot/dts/bcm988312hr.dt.yaml
> 
> ahci@41000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'sata-port@0', 'sata-port@1' were unexpected)
> 	arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dt.yaml
> 	arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dt.yaml
> 
> sata@a000: compatible: 'oneOf' conditional failed, one must be fixed:
> 	arch/arm/boot/dts/bcm963138dvt.dt.yaml

All of those fixed in v3.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
deleted file mode 100644
index b9ae4ce4a0a0..000000000000
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
+++ /dev/null
@@ -1,45 +0,0 @@ 
-* Broadcom SATA3 AHCI Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible         : should be one or more of
-			"brcm,bcm7216-ahci"
-			"brcm,bcm7425-ahci"
-			"brcm,bcm7445-ahci"
-			"brcm,bcm-nsp-ahci"
-			"brcm,sata3-ahci"
-			"brcm,bcm63138-ahci"
-- reg                : register mappings for AHCI and SATA_TOP_CTRL
-- reg-names          : "ahci" and "top-ctrl"
-- interrupts         : interrupt mapping for SATA IRQ
-
-Optional properties:
-
-- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
-  pointing to the RESCAL reset controller provider node.
-- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
-
-Also see ahci-platform.txt.
-
-Example:
-
-	sata@f045a000 {
-		compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-		reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
-		reg-names = "ahci", "top-ctrl";
-		interrupts = <0 30 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
new file mode 100644
index 000000000000..4098d56872ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
@@ -0,0 +1,91 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 AHCI Controller
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - enum:
+              - brcm,bcm7445-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - enum:
+              - brcm,bcm7425-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - const: brcm,bcm-nsp-ahci
+      - items:
+          - const: brcm,bcm63138-ahci
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: top-ctrl
+
+  interrupts: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm7216-ahci
+then:
+  properties:
+    resets: true
+    reset-names:
+      items:
+        - const: rescal
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@f045a000 {
+        compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+        reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+        reg-names = "ahci", "top-ctrl";
+        interrupts = <0 30 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+            phys = <&sata_phy 0>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+            phys = <&sata_phy 1>;
+        };
+    };