@@ -24,6 +24,91 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+ panel {
+ compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+ backlight = <&backlight>;
+ power-supply = <&v3v3>;
+
+ port {
+ panel_out_bridge: endpoint {
+ remote-endpoint = <&bridge_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi {
+ status = "okay";
+ phy-dsi-supply = <®18>;
+
+ ports {
+ port@0 {
+ reg = <0>;
+ dsi_in_ltdc: endpoint {
+ remote-endpoint = <<dc_out_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out_bridge: endpoint {
+ remote-endpoint = <&bridge_in_dsi>;
+ };
+ };
+ };
+};
+
+&i2c6 {
+ i2c-scl-falling-time-ns = <20>;
+ i2c-scl-rising-time-ns = <185>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_pins_a>;
+ pinctrl-1 = <&i2c6_sleep_pins_a>;
+ status = "okay";
+
+ bridge@2c {
+ compatible = "ti,sn65dsi84";
+ reg = <0x2c>;
+ enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in_dsi: endpoint {
+ remote-endpoint = <&dsi_out_bridge>;
+ data-lanes = <1 2>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+ };
+};
+
+<dc {
+ status = "okay";
+
+ port {
+ ltdc_out_dsi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in_ltdc>;
+ };
+ };
};
&sdmmc1 {
Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit has plugged with 7" LVDS panel. Engicam i.Core STM32MP1 SoM has SN65DSI84 DSI to LVDS bridge. This patch adds a display pipeline to connect DSI to SN65DSI84 to 7" LVDS panel. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - fix dtbs_check Changes for v2: - none .../stm32mp157a-icore-stm32mp1-edimm2.2.dts | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+)