diff mbox series

[1/3] thermal: qcom: lmh: Add support for sm8150

Message ID 20211202223802.382068-2-thara.gopinath@linaro.org
State New
Headers show
Series Extend LMh driver to suppot Qualcomm sm8150 SoC. | expand

Commit Message

Thara Gopinath Dec. 2, 2021, 10:38 p.m. UTC 
Add compatible to support LMh for sm8150 SoC.
sm8150 does not require explicit enabling for various LMh subsystems.
Move this piece of code under condition that it is executed only
for sdm845 SoC.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/lmh.c | 61 ++++++++++++++++++++------------------
 1 file changed, 32 insertions(+), 29 deletions(-)

Comments

Konrad Dybcio Dec. 4, 2021, 1:34 p.m. UTC | #1 
Hi,

On 02.12.2021 23:38, Thara Gopinath wrote:
> Add compatible to support LMh for sm8150 SoC.
> sm8150 does not require explicit enabling for various LMh subsystems.
> Move this piece of code under condition that it is executed only
> for sdm845 SoC.
>
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> ---
>  drivers/thermal/qcom/lmh.c | 61 ++++++++++++++++++++------------------
>  1 file changed, 32 insertions(+), 29 deletions(-)

[...]


> -		return ret;
> +	if (of_device_is_compatible(np, "qcom,sdm845-lmh")) {
> +		if (!qcom_scm_lmh_dcvsh_available())
> +			return -EINVAL;

I don't believe this is the correct approach, as different SoCs may

require different sequences of these writes (for example SDM660/MSM8998

seems to only enable the thermal algorithm), and there will (hopefully) be interest

in adding LMH support for more platforms, so perhaps separating this somehow

could keep this a bit cleaner and easier to work with for the next person..



Konrad
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index eafa7526eb8b..e390c3fd0272 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -138,35 +138,37 @@  static int lmh_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (!qcom_scm_lmh_dcvsh_available())
-		return -EINVAL;
-
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret)
-		dev_err(dev, "Error %d enabling current subfunction\n", ret);
-
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret)
-		dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
-
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret)
-		dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
-
-	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
-				 LMH_NODE_DCVS, node_id, 0);
-	if (ret) {
-		dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
-		return ret;
-	}
-
-	ret = qcom_scm_lmh_profile_change(0x1);
-	if (ret) {
-		dev_err(dev, "Error %d changing profile\n", ret);
-		return ret;
+	if (of_device_is_compatible(np, "qcom,sdm845-lmh")) {
+		if (!qcom_scm_lmh_dcvsh_available())
+			return -EINVAL;
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling current subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret)
+			dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
+
+		ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
+					 LMH_NODE_DCVS, node_id, 0);
+		if (ret) {
+			dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
+			return ret;
+		}
+
+		ret = qcom_scm_lmh_profile_change(0x1);
+		if (ret) {
+			dev_err(dev, "Error %d changing profile\n", ret);
+			return ret;
+		}
 	}
 
 	/* Set default thermal trips */
@@ -214,6 +216,7 @@  static int lmh_probe(struct platform_device *pdev)
 
 static const struct of_device_id lmh_table[] = {
 	{ .compatible = "qcom,sdm845-lmh", },
+	{ .compatible = "qcom,sm8150-lmh", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, lmh_table);