diff mbox series

[v2] usb: typec: clear usb_pd flag if change to typec only mode

Message ID 1638430992-15976-1-git-send-email-stevensyu7@gmail.com
State Superseded
Headers show
Series [v2] usb: typec: clear usb_pd flag if change to typec only mode | expand

Commit Message

Steven Syu Dec. 2, 2021, 7:43 a.m. UTC
Set usb_pd to 0 when power operation mode
leaving power delivery. That can avoid user-sepace
read "yes" form the supports_usb_power_delivery_show() attribute
but power operation mode already change form power delivery to
others mode.

Signed-off-by: Steven Syu <stevensyu7@gmail.com>
---
 drivers/usb/typec/class.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Greg KH Dec. 2, 2021, 7:57 a.m. UTC | #1
On Thu, Dec 02, 2021 at 03:43:12PM +0800, Steven Syu wrote:
> Set usb_pd to 0 when power operation mode
> leaving power delivery. That can avoid user-sepace
> read "yes" form the supports_usb_power_delivery_show() attribute
> but power operation mode already change form power delivery to
> others mode.
> 
> Signed-off-by: Steven Syu <stevensyu7@gmail.com>
> ---
>  drivers/usb/typec/class.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
> index aeef453..2043e07 100644
> --- a/drivers/usb/typec/class.c
> +++ b/drivers/usb/typec/class.c
> @@ -1718,6 +1718,8 @@ void typec_set_pwr_opmode(struct typec_port *port,
>  			partner->usb_pd = 1;
>  			sysfs_notify(&partner_dev->kobj, NULL,
>  				     "supports_usb_power_delivery");
> +		} else if (opmode != TYPEC_PWR_MODE_PD && partner->usb_pd) {
> +			partner->usb_pd = 0;
>  		}
>  		put_device(partner_dev);
>  	}
> -- 
> 2.7.4
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for what needs to be done
  here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot
diff mbox series

Patch

diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index aeef453..2043e07 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1718,6 +1718,8 @@  void typec_set_pwr_opmode(struct typec_port *port,
 			partner->usb_pd = 1;
 			sysfs_notify(&partner_dev->kobj, NULL,
 				     "supports_usb_power_delivery");
+		} else if (opmode != TYPEC_PWR_MODE_PD && partner->usb_pd) {
+			partner->usb_pd = 0;
 		}
 		put_device(partner_dev);
 	}