diff mbox series

[v16,24/40] spi: tegra20-slink: Add OPP support

Message ID 20211130232347.950-25-digetx@gmail.com
State Accepted
Commit 07f837554bb59c17729951c12d3564d05d0ff4bb
Headers show
Series NVIDIA Tegra power management patches for 5.17 | expand

Commit Message

Dmitry Osipenko Nov. 30, 2021, 11:23 p.m. UTC 
The SPI on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now SPI driver must use OPP
API for driving the controller's clock rate because OPP API takes care
of reconfiguring the domain's performance state in accordance to the
rate. Add OPP support to the driver.

Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/spi/spi-tegra20-slink.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index e8204e155484..2a03739a0c60 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -18,12 +18,15 @@ 
 #include <linux/kthread.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/reset.h>
 #include <linux/spi/spi.h>
 
+#include <soc/tegra/common.h>
+
 #define SLINK_COMMAND			0x000
 #define SLINK_BIT_LENGTH(x)		(((x) & 0x1f) << 0)
 #define SLINK_WORD_SIZE(x)		(((x) & 0x1f) << 5)
@@ -680,7 +683,7 @@  static int tegra_slink_start_transfer_one(struct spi_device *spi,
 	bits_per_word = t->bits_per_word;
 	speed = t->speed_hz;
 	if (speed != tspi->cur_speed) {
-		clk_set_rate(tspi->clk, speed * 4);
+		dev_pm_opp_set_rate(tspi->dev, speed * 4);
 		tspi->cur_speed = speed;
 	}
 
@@ -1066,6 +1069,10 @@  static int tegra_slink_probe(struct platform_device *pdev)
 		goto exit_free_master;
 	}
 
+	ret = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
+	if (ret)
+		goto exit_free_master;
+
 	tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
 	tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;