[v2,2/2] dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers

Introduce the bindings for the Kinetic KTD2061/58/59/60RGB LED device
driver. The KTD20xx can control RGB LEDs individually or as part of a
control bank group.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
---
 .../bindings/leds/leds-ktd20xx.yaml           | 123 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml

On Tue, Nov 23, 2021 at 11:18:26AM +0100, Florian Eckert wrote:
> Introduce the bindings for the Kinetic KTD2061/58/59/60RGB LED device
> driver. The KTD20xx can control RGB LEDs individually or as part of a
> control bank group.
> 
> Signed-off-by: Florian Eckert <fe@dev.tdt.de>
> ---
>  .../bindings/leds/leds-ktd20xx.yaml           | 123 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml b/Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml
> new file mode 100644
> index 000000000000..b10b5fd507db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-ktd20xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: LED driver for KTD20xx RGB LED from Kinetic.
> +
> +maintainers:
> +  - Florian Eckert <fe@dev.tdt.de>
> +
> +description: |
> +  The KTD20XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
> +  a LED group or control them individually.
> +
> +  The difference in these RGB LED drivers is I2C address number the device is
> +  listen on.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - kinetic,ktd20xx
> +
> +  reg:
> +    maxItems: 1
> +    description:
> +      I2C slave address
> +      ktd2061/58/59/60 0x68 0x69 0x6A 0x6B
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  'kinetic,color-current0':
> +    description:
> +      Specifies the current selection for the RGB color0.
> +      Value 1 must be the current value for the color red.
> +      Value 2 must be the current value for the color green.
> +      Value 3 must be the current value for the color blue.
> +      The current setting range is from 0mA to 24mA with 125uA steps.
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    items:
> +      - minItems: 3
> +      - maxItems: 3

You've defined a 2x3 matrix. I think you want something like:

items:
  - description: current value for the color red
  - description: current value for the color green
  - description: current value for the color blue
  

> +
> +  'kinetic,color-current1':
> +    description:
> +      Specifies the current selection for the RGB color0.

color1? 

> +      Value 1 must be the current value for the color red.
> +      Value 2 must be the current value for the color green.
> +      Value 3 must be the current value for the color blue.
> +      The current setting range is from 0mA to 24mA with 125uA steps.
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    items:
> +      - minItems: 3
> +      - maxItems: 3
> +
> +patternProperties:
> +  '^multi-led@[0-9a-f]$':
> +    type: object
> +    allOf:

Don't need 'allOf'.

> +      - $ref: leds-class-multicolor.yaml#
> +    properties:
> +      reg:
> +        minItems: 1
> +        maxItems: 12
> +        description:
> +          This property denotes the LED module number(s) that is used on the
> +          for the child node.

blank line.

> +      'kinetic,color-selection':
> +        description:
> +          Specifies the color selection for this LED.
> +          Value 1 selects the color register for color red.
> +          Value 2 selects the color register for color green.
> +          Value 3 selects the color register for color blue.
> +          The value can be either 0 or 1. If 0, the current for the color
> +          from color register 0 is used. If 1, the current for the color
> +          from color register 1 is used.
> +     $ref: /schemas/types.yaml#/definitions/uint8-array
> +     items:

Indentation is wrong. That should be an error...

> +       - minItems: 3
> +       - maxItems: 3
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +   #include <dt-bindings/leds/common.h>
> +
> +   i2c {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +
> +       led-controller@14 {
> +           compatible = "ti,lp5009";

Not the right compatible.

> +           reg = <0x14>;
> +           #address-cells = <1>;
> +           #size-cells = <0>;
> +           color-current0 = [ 00 00 00 ] // Current for RGB is 0mA
> +           color-current1 = [ 28 28 28 ] // Current for RGB is 5mA

If these are already used for other bindings, then reuse the same 
property names.

> +
> +           multi-led@0 {
> +               reg = <0x0>;
> +               color = <LED_COLOR_ID_RGB>;
> +               function = LED_FUNCTION_CHARGING;
> +                kinetic,color-selection = [ 00 01 00 ]; // Red=0mA Green=5mA Blue=0mA
> +          };
> +
> +          multi-led@2 {
> +            reg = <0x2>;
> +            color = <LED_COLOR_ID_RGB>;
> +            function = LED_FUNCTION_STANDBY;
> +         };
> +       };

Fix the indentation.

> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 736d564f7e93..125bae48c2d1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10607,6 +10607,7 @@ KTD20XX LED CONTROLLER DRIVER
>  M:	Florian Eckert <fe@dev.tdt.de>
>  L:	linux-leds@vger.kernel.org
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml
>  F:	drivers/leds/leds-ktd20xx.c
>  
>  KTEST
> -- 
> 2.20.1
> 
>