@@ -1255,21 +1255,6 @@ static const struct wled_var_cfg wled5_ovp_cfg = {
.size = 16,
};
-static u32 wled3_num_strings_values_fn(u32 idx)
-{
- return idx + 1;
-}
-
-static const struct wled_var_cfg wled3_num_strings_cfg = {
- .fn = wled3_num_strings_values_fn,
- .size = 3,
-};
-
-static const struct wled_var_cfg wled4_num_strings_cfg = {
- .fn = wled3_num_strings_values_fn,
- .size = 4,
-};
-
static u32 wled3_switch_freq_values_fn(u32 idx)
{
return 19200 / (2 * (1 + idx));
@@ -1343,11 +1328,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled3_num_strings_cfg,
- },
};
const struct wled_u32_opts wled4_opts[] = {
@@ -1371,11 +1351,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled4_num_strings_cfg,
- },
};
const struct wled_u32_opts wled5_opts[] = {
@@ -1399,11 +1374,6 @@ static int wled_configure(struct wled *wled)
.val_ptr = &cfg->switch_freq,
.cfg = &wled3_switch_freq_cfg,
},
- {
- .name = "qcom,num-strings",
- .val_ptr = &cfg->num_strings,
- .cfg = &wled4_num_strings_cfg,
- },
{
.name = "qcom,modulator-sel",
.val_ptr = &cfg->mod_sel,
@@ -1522,8 +1492,6 @@ static int wled_configure(struct wled *wled)
*bool_opts[i].val_ptr = true;
}
- cfg->num_strings = cfg->num_strings + 1;
-
string_len = of_property_count_elems_of_size(dev->of_node,
"qcom,enabled-strings",
sizeof(u32));
@@ -1554,6 +1522,22 @@ static int wled_configure(struct wled *wled)
}
}
+ rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val);
+ if (!rc) {
+ if (val < 1 || val > wled->max_string_count) {
+ dev_err(dev, "qcom,num-strings must be between 1 and %d\n",
+ wled->max_string_count);
+ return -EINVAL;
+ }
+
+ if (string_len > 0 && val > string_len) {
+ dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n");
+ return -EINVAL;
+ }
+
+ cfg->num_strings = val;
+ }
+
return 0;
}
When not specifying num-strings in the DT the default is used, but +1 is added to it which turns WLED3 into 4 and WLED4/5 into 5 strings instead of 3 and 4 respectively, causing out-of-bounds reads and register read/writes. This +1 exists for a deficiency in the DT parsing code, and is simply omitted entirely - solving this oob issue - by parsing the property separately much like qcom,enabled-strings. This also enables more stringent checks on the maximum value when qcom,enabled-strings is provided in the DT, by parsing num-strings after enabled-strings to allow it to check against (and in a subsequent patch override) the length of enabled-strings: it is invalid to set num-strings higher than that. The DT currently utilizes it to get around an incorrect fixed read of four elements from that array (has been addressed in a prior patch) by setting a lower num-strings where desired. Fixes: 93c64f1ea1e8 ("leds: add Qualcomm PM8941 WLED driver") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> --- drivers/video/backlight/qcom-wled.c | 48 ++++++++++------------------- 1 file changed, 16 insertions(+), 32 deletions(-)