diff mbox series

[PULL,33/60] target/openrisc: Make openrisc_cpu_tlb_fill sysemu only

Message ID 20211102110740.215699-34-richard.henderson@linaro.org
State New
Headers show
Series accel/tcg patch queue | expand

Commit Message

Richard Henderson Nov. 2, 2021, 11:07 a.m. UTC 
The fallback code in cpu_loop_exit_sigsegv is sufficient for
openrisc linux-user.

This makes all of the code in mmu.c sysemu only, so remove
the ifdefs and move the file to openrisc_softmmu_ss.
Remove the code from cpu_loop that handled EXCP_DPF.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

---
 target/openrisc/cpu.h          | 7 ++++---
 linux-user/openrisc/cpu_loop.c | 8 --------
 target/openrisc/cpu.c          | 2 +-
 target/openrisc/mmu.c          | 9 ---------
 target/openrisc/meson.build    | 2 +-
 5 files changed, 6 insertions(+), 22 deletions(-)

-- 
2.25.1
diff mbox series

Patch

diff --git a/target/openrisc/cpu.h b/target/openrisc/cpu.h
index 187a4a114e..ee069b080c 100644
--- a/target/openrisc/cpu.h
+++ b/target/openrisc/cpu.h
@@ -317,14 +317,15 @@  hwaddr openrisc_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr);
 int openrisc_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg);
 int openrisc_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
 void openrisc_translate_init(void);
-bool openrisc_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
-                           MMUAccessType access_type, int mmu_idx,
-                           bool probe, uintptr_t retaddr);
 int print_insn_or1k(bfd_vma addr, disassemble_info *info);
 
 #define cpu_list cpu_openrisc_list
 
 #ifndef CONFIG_USER_ONLY
+bool openrisc_cpu_tlb_fill(CPUState *cs, vaddr address, int size,
+                           MMUAccessType access_type, int mmu_idx,
+                           bool probe, uintptr_t retaddr);
+
 extern const VMStateDescription vmstate_openrisc_cpu;
 
 void openrisc_cpu_do_interrupt(CPUState *cpu);
diff --git a/linux-user/openrisc/cpu_loop.c b/linux-user/openrisc/cpu_loop.c
index 10b7147f68..3cfdbbf037 100644
--- a/linux-user/openrisc/cpu_loop.c
+++ b/linux-user/openrisc/cpu_loop.c
@@ -54,14 +54,6 @@  void cpu_loop(CPUOpenRISCState *env)
                 cpu_set_gpr(env, 11, ret);
             }
             break;
-        case EXCP_DPF:
-        case EXCP_IPF:
-            info.si_signo = TARGET_SIGSEGV;
-            info.si_errno = 0;
-            info.si_code = TARGET_SEGV_MAPERR;
-            info._sifields._sigfault._addr = env->pc;
-            queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
-            break;
         case EXCP_ALIGN:
             info.si_signo = TARGET_SIGBUS;
             info.si_errno = 0;
diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c
index 27cb04152f..dfbafc5236 100644
--- a/target/openrisc/cpu.c
+++ b/target/openrisc/cpu.c
@@ -186,9 +186,9 @@  static const struct SysemuCPUOps openrisc_sysemu_ops = {
 
 static const struct TCGCPUOps openrisc_tcg_ops = {
     .initialize = openrisc_translate_init,
-    .tlb_fill = openrisc_cpu_tlb_fill,
 
 #ifndef CONFIG_USER_ONLY
+    .tlb_fill = openrisc_cpu_tlb_fill,
     .cpu_exec_interrupt = openrisc_cpu_exec_interrupt,
     .do_interrupt = openrisc_cpu_do_interrupt,
 #endif /* !CONFIG_USER_ONLY */
diff --git a/target/openrisc/mmu.c b/target/openrisc/mmu.c
index 94df8c7bef..e561ef245b 100644
--- a/target/openrisc/mmu.c
+++ b/target/openrisc/mmu.c
@@ -23,11 +23,8 @@ 
 #include "exec/exec-all.h"
 #include "exec/gdbstub.h"
 #include "qemu/host-utils.h"
-#ifndef CONFIG_USER_ONLY
 #include "hw/loader.h"
-#endif
 
-#ifndef CONFIG_USER_ONLY
 static inline void get_phys_nommu(hwaddr *phys_addr, int *prot,
                                   target_ulong address)
 {
@@ -94,7 +91,6 @@  static int get_phys_mmu(OpenRISCCPU *cpu, hwaddr *phys_addr, int *prot,
         return need & PAGE_EXEC ? EXCP_ITLBMISS : EXCP_DTLBMISS;
     }
 }
-#endif
 
 static void raise_mmu_exception(OpenRISCCPU *cpu, target_ulong address,
                                 int exception)
@@ -112,8 +108,6 @@  bool openrisc_cpu_tlb_fill(CPUState *cs, vaddr addr, int size,
 {
     OpenRISCCPU *cpu = OPENRISC_CPU(cs);
     int excp = EXCP_DPF;
-
-#ifndef CONFIG_USER_ONLY
     int prot;
     hwaddr phys_addr;
 
@@ -138,13 +132,11 @@  bool openrisc_cpu_tlb_fill(CPUState *cs, vaddr addr, int size,
     if (probe) {
         return false;
     }
-#endif
 
     raise_mmu_exception(cpu, addr, excp);
     cpu_loop_exit_restore(cs, retaddr);
 }
 
-#ifndef CONFIG_USER_ONLY
 hwaddr openrisc_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
 {
     OpenRISCCPU *cpu = OPENRISC_CPU(cs);
@@ -177,4 +169,3 @@  hwaddr openrisc_cpu_get_phys_page_debug(CPUState *cs, vaddr addr)
         return phys_addr;
     }
 }
-#endif
diff --git a/target/openrisc/meson.build b/target/openrisc/meson.build
index e445dec4a0..84322086ec 100644
--- a/target/openrisc/meson.build
+++ b/target/openrisc/meson.build
@@ -10,7 +10,6 @@  openrisc_ss.add(files(
   'fpu_helper.c',
   'gdbstub.c',
   'interrupt_helper.c',
-  'mmu.c',
   'sys_helper.c',
   'translate.c',
 ))
@@ -19,6 +18,7 @@  openrisc_softmmu_ss = ss.source_set()
 openrisc_softmmu_ss.add(files(
   'interrupt.c',
   'machine.c',
+  'mmu.c',
 ))
 
 target_arch += {'openrisc': openrisc_ss}