@@ -284,37 +284,52 @@ Support has been added for the UEFI capsule update feature which
enables updating the U-Boot image using the UEFI firmware management
protocol (FMP). The capsules are not passed to the firmware through
the UpdateCapsule runtime service. Instead, capsule-on-disk
-functionality is used for fetching the capsule from the EFI System
-Partition (ESP) by placing the capsule file under the
-\EFI\UpdateCapsule directory.
-
-The directory \EFI\UpdateCapsule is checked for capsules only within the
-EFI system partition on the device specified in the active boot option
-determined by reference to BootNext variable or BootOrder variable processing.
-The active Boot Variable is the variable with highest priority BootNext or
-within BootOrder that refers to a device found to be present. Boot variables
-in BootOrder but referring to devices not present are ignored when determining
-active boot variable.
-Before starting a capsule update make sure your capsules are installed in the
-correct ESP partition or set BootNext.
+functionality is used for fetching capsules from the EFI System
+Partition (ESP) by placing capsule files under the directory::
+
+ \EFI\UpdateCapsule
+
+The directory is checked for capsules only within the
+EFI system partition on the device specified in the active boot option,
+which is determined by BootXXXX variable in BootNext, or if not, the highest
+priority one within BootOrder. Any BootXXXX variables referring to devices
+not present are ignored when determining the active boot option.
+
+Please note that capsules will be applied in the alphabetic order of
+capsule file names.
+
+Creating a capsule file
+***********************
+
+A capsule file can be created by using tools/mkeficapsule.
+To build this tool, enable::
+
+ CONFIG_TOOLS_MKEFICAPSULE=y
+ CONFIG_TOOLS_LIBCRYPTO=y
+
+Run the following command::
+
+ $ mkeficapsule \
+ --index 1 --instance 0 \
+ [--fit <FIT image> | --raw <raw image>] \
+ <capsule_file_name>
Performing the update
*********************
-Since U-boot doesn't currently support SetVariable at runtime there's a Kconfig
-option (CONFIG_EFI_IGNORE_OSINDICATIONS) to disable the OsIndications variable
-check. If that option is enabled just copy your capsule to \EFI\UpdateCapsule.
-
-If that option is disabled, you'll need to set the OsIndications variable with::
+Put capsule files under the directory mentioned above.
+Then, following the UEFI specification, you'll need to set
+the EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED
+bit in OsIndications variable with::
=> setenv -e -nv -bs -rt -v OsIndications =0x04
-Finally, the capsule update can be initiated either by rebooting the board,
-which is the preferred method, or by issuing the following command::
-
- => efidebug capsule disk-update
+Since U-boot doesn't currently support SetVariable at runtime, its value
+won't be taken over across the reboot. If this is the case, you can skip
+this feature check with the Kconfig option (CONFIG_EFI_IGNORE_OSINDICATIONS)
+set.
-**The efidebug command is should only be used during debugging/development.**
+Finally, the capsule update can be initiated by rebooting the board.
Enabling Capsule Authentication
*******************************
@@ -338,7 +353,7 @@ The public and private keys used for the signing process are generated
and used by the steps highlighted below::
1. Install utility commands on your host
- * OPENSSL
+ * openssl
* efitools
2. Create signing keys and certificate files on your host
@@ -347,59 +362,14 @@ and used by the steps highlighted below::
-keyout CRT.key -out CRT.crt -nodes -days 365
$ cert-to-efi-sig-list CRT.crt CRT.esl
- $ openssl x509 -in CRT.crt -out CRT.cer -outform DER
- $ openssl x509 -inform DER -in CRT.cer -outform PEM -out CRT.pub.pem
-
- $ openssl pkcs12 -export -out CRT.pfx -inkey CRT.key -in CRT.crt
- $ openssl pkcs12 -in CRT.pfx -nodes -out CRT.pem
-
-The capsule file can be generated by using the GenerateCapsule.py
-script in EDKII::
-
- $ ./BaseTools/BinWrappers/PosixLike/GenerateCapsule -e -o \
- <capsule_file_name> --monotonic-count <val> --fw-version \
- <val> --lsv <val> --guid \
- e2bb9c06-70e9-4b14-97a3-5a7913176e3f --verbose \
- --update-image-index <val> --signer-private-cert \
- /path/to/CRT.pem --trusted-public-cert \
- /path/to/CRT.pub.pem --other-public-cert /path/to/CRT.pub.pem \
- <u-boot.bin>
-
-Place the capsule generated in the above step on the EFI System
-Partition under the EFI/UpdateCapsule directory
-
-Testing on QEMU
-***************
-
-Currently, support has been added on the QEMU ARM64 virt platform for
-updating the U-Boot binary as a raw image when the platform is booted
-in non-secure mode, i.e. with CONFIG_TFABOOT disabled. For this
-configuration, the QEMU platform needs to be booted with
-'secure=off'. The U-Boot binary placed on the first bank of the NOR
-flash at offset 0x0. The U-Boot environment is placed on the second
-NOR flash bank at offset 0x4000000.
-
-The capsule update feature is enabled with the following configuration
-settings::
-
- CONFIG_MTD=y
- CONFIG_FLASH_CFI_MTD=y
- CONFIG_CMD_MTDPARTS=y
- CONFIG_CMD_DFU=y
- CONFIG_DFU_MTD=y
- CONFIG_PCI_INIT_R=y
- CONFIG_EFI_CAPSULE_ON_DISK=y
- CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
- CONFIG_EFI_CAPSULE_FIRMWARE=y
- CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
-
-In addition, the following config needs to be disabled(QEMU ARM specific)::
-
- CONFIG_TFABOOT
-
-The capsule file can be generated by using the tools/mkeficapsule::
+Run the following command to create and sign the capsule file::
- $ mkeficapsule --raw <u-boot.bin> --index 1 <capsule_file_name>
+ $ mkeficapsule --monotonic-count 1 \
+ --private-key CRT.key \
+ --certificate CRT.crt \
+ --index 1 --instance 0 \
+ [--fit <FIT image> | --raw <raw image>] \
+ <capsule_file_name>
Executing the boot manager
~~~~~~~~~~~~~~~~~~~~~~~~~~
Now we can use mkeficapsule command instead of EDK-II's script to create a signed capsule file. So update the instruction for capsule authentication. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> --- doc/develop/uefi/uefi.rst | 122 ++++++++++++++------------------------ 1 file changed, 46 insertions(+), 76 deletions(-) -- 2.33.0