@@ -12,92 +12,6 @@ used by all apr services. Must contain the following properties.
from DSP.
example "qcom,q6afe"
-= AFE DAIs (Digial Audio Interface)
-"dais" subnode of the AFE node. It represents afe dais, each afe dai is a
-subnode of "dais" representing board specific dai setup.
-"dais" node should have following properties followed by dai children.
-
-- compatible:
- Usage: required
- Value type: <stringlist>
- Definition: must be "qcom,q6afe-dais"
-
-- #sound-dai-cells
- Usage: required
- Value type: <u32>
- Definition: Must be 1
-
-- #address-cells
- Usage: required
- Value type: <u32>
- Definition: Must be 1
-
-- #size-cells
- Usage: required
- Value type: <u32>
- Definition: Must be 0
-
-== AFE DAI is subnode of "dais" and represent a dai, it includes board specific
-configuration of each dai. Must contain the following properties.
-
-- reg
- Usage: required
- Value type: <u32>
- Definition: Must be dai id
-
-- qcom,sd-lines
- Usage: required for mi2s interface
- Value type: <prop-encoded-array>
- Definition: Must be list of serial data lines used by this dai.
- should be one or more of the 0-3 sd lines.
-
- - qcom,tdm-sync-mode:
- Usage: required for tdm interface
- Value type: <prop-encoded-array>
- Definition: Synchronization mode.
- 0 - Short sync bit mode
- 1 - Long sync mode
- 2 - Short sync slot mode
-
- - qcom,tdm-sync-src:
- Usage: required for tdm interface
- Value type: <prop-encoded-array>
- Definition: Synchronization source.
- 0 - External source
- 1 - Internal source
-
- - qcom,tdm-data-out:
- Usage: required for tdm interface
- Value type: <prop-encoded-array>
- Definition: Data out signal to drive with other masters.
- 0 - Disable
- 1 - Enable
-
- - qcom,tdm-invert-sync:
- Usage: required for tdm interface
- Value type: <prop-encoded-array>
- Definition: Invert the sync.
- 0 - Normal
- 1 - Invert
-
- - qcom,tdm-data-delay:
- Usage: required for tdm interface
- Value type: <prop-encoded-array>
- Definition: Number of bit clock to delay data
- with respect to sync edge.
- 0 - 0 bit clock cycle
- 1 - 1 bit clock cycle
- 2 - 2 bit clock cycle
-
- - qcom,tdm-data-align:
- Usage: required for tdm interface
- Value type: <prop-encoded-array>
- Definition: Indicate how data is packed
- within the slot. For example, 32 slot width in case of
- sample bit width is 24.
- 0 - MSB
- 1 - LSB
-
= AFE CLOCKSS
"clocks" subnode of the AFE node. It represents q6afe clocks
"clocks" node should have following properties.
@@ -122,78 +36,6 @@ apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
- dais {
- compatible = "qcom,q6afe-dais";
- #sound-dai-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- dai@1 {
- reg = <HDMI_RX>;
- };
-
- dai@24 {
- reg = <PRIMARY_TDM_RX_0>;
- qcom,tdm-sync-mode = <1>:
- qcom,tdm-sync-src = <1>;
- qcom,tdm-data-out = <0>;
- qcom,tdm-invert-sync = <1>;
- qcom,tdm-data-delay = <1>;
- qcom,tdm-data-align = <0>;
-
- };
-
- dai@25 {
- reg = <PRIMARY_TDM_TX_0>;
- qcom,tdm-sync-mode = <1>:
- qcom,tdm-sync-src = <1>;
- qcom,tdm-data-out = <0>;
- qcom,tdm-invert-sync = <1>;
- qcom,tdm-data-delay <1>:
- qcom,tdm-data-align = <0>;
- };
-
- dai@16 {
- reg = <PRIMARY_MI2S_RX>;
- qcom,sd-lines = <0 2>;
- };
-
- dai@17 {
- reg = <PRIMARY_MI2S_TX>;
- qcom,sd-lines = <1>;
- };
-
- dai@18 {
- reg = <SECONDARY_MI2S_RX>;
- qcom,sd-lines = <0 3>;
- };
-
- dai@19 {
- reg = <SECONDARY_MI2S_TX>;
- qcom,sd-lines = <1>;
- };
-
- dai@20 {
- reg = <TERTIARY_MI2S_RX>;
- qcom,sd-lines = <1 3>;
- };
-
- dai@21 {
- reg = <TERTIARY_MI2S_TX>;
- qcom,sd-lines = <0>;
- };
-
- dai@22 {
- reg = <QUATERNARY_MI2S_RX>;
- qcom,sd-lines = <0>;
- };
-
- dai@23 {
- reg = <QUATERNARY_MI2S_TX>;
- qcom,sd-lines = <1>;
- };
- };
-
clocks {
compatible = "qcom,q6afe-clocks";
#clock-cells = <2>;
new file mode 100644
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports binding
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ This binding describes the Qualcomm DSP LPASS Audio ports
+
+properties:
+ compatible:
+ enum:
+ - qcom,q6afe-dais
+
+ reg:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+#Digital Audio Interfaces
+patternProperties:
+ '^dai@[0-9]+$':
+ type: object
+ description:
+ Q6DSP Digital Audio Interfaces.
+
+ properties:
+ reg:
+ description:
+ Digital Audio Interface ID
+
+ qcom,sd-lines:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ List of serial data lines used by this dai.should be one or more of the 0-3 sd lines.
+ minItems: 1
+ maxItems: 4
+ uniqueItems: true
+ items:
+ minimum: 0
+ maximum: 3
+
+ qcom,tdm-sync-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ description:
+ TDM Synchronization mode
+ 0 = Short sync bit mode
+ 1 = Long sync mode
+ 2 = Short sync slot mode
+
+ qcom,tdm-sync-src:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description:
+ TDM Synchronization source
+ 0 = External source
+ 1 = Internal source
+
+ qcom,tdm-data-out:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description:
+ TDM Data out signal to drive with other masters
+ 0 = Disable
+ 1 = Enable
+
+ qcom,tdm-invert-sync:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description:
+ TDM Invert the sync
+ 0 = Normal
+ 1 = Invert
+
+ qcom,tdm-data-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ description:
+ TDM Number of bit clock to delay data
+ 0 = 0 bit clock cycle
+ 1 = 1 bit clock cycle
+ 2 = 2 bit clock cycle
+
+ qcom,tdm-data-align:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description:
+ Indicate how data is packed within the slot. For example, 32 slot
+ width in case of sample bit width is 24TDM Invert the sync.
+ 0 = MSB
+ 1 = LSB
+
+ required:
+ - reg
+
+ allOf:
+ - if:
+ properties:
+ reg:
+ contains:
+ # TDM DAI ID range from PRIMARY_TDM_RX_0 - QUINARY_TDM_TX_7
+ items:
+ minimum: 24
+ maximum: 103
+ then:
+ required:
+ - qcom,tdm-sync-mode
+ - qcom,tdm-sync-src
+ - qcom,tdm-data-out
+ - qcom,tdm-invert-sync
+ - qcom,tdm-data-delay
+ - qcom,tdm-data-align
+
+ - if:
+ properties:
+ reg:
+ contains:
+ # MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and
+ # QUINARY_MI2S_RX - QUINARY_MI2S_TX
+ items:
+ oneOf:
+ - minimum: 16
+ maximum: 23
+ - minimum: 127
+ maximum: 128
+ then:
+ required:
+ - qcom,sd-lines
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - "#sound-dai-cells"
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/qcom,apr.h>
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ apr {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ apr-service@4 {
+ reg = <APR_SVC_AFE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ q6afedai@1 {
+ compatible = "qcom,q6afe-dais";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <0 1 2 3>;
+ };
+ };
+ };
+ };