| Message ID | 1437476823-3358-2-git-send-email-vaibhav.hiremath@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Tue, 21 Jul 2015, Vaibhav Hiremath wrote: > Update header file with required macros for 32KHz buffered clock > output of 88PM800 family of device. > These macros will be used in clk provider driver. > > Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> > --- > include/linux/mfd/88pm80x.h | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h > index 05d9bad..680e4eb 100644 > --- a/include/linux/mfd/88pm80x.h > +++ b/include/linux/mfd/88pm80x.h > @@ -91,6 +91,7 @@ enum { > /* Referance and low power registers */ > #define PM800_LOW_POWER1 (0x20) > #define PM800_LOW_POWER2 (0x21) > +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5) > > #define PM800_LOW_POWER_CONFIG3 (0x22) > #define PM800_LDOBK_FREEZE BIT(7) > @@ -138,6 +139,13 @@ enum { > #define PM800_ALARM BIT(5) > #define PM800_RTC1_USE_XO BIT(7) > > +#define PM800_32K_OUTX_SEL_MASK (0x3) > +/* 32KHz clk output sel mode */ > +#define PM800_32K_OUTX_SEL_ZERO (0x0) > +#define PM800_32K_OUTX_SEL_INT_32KHZ (0x1) > +#define PM800_32K_OUTX_SEL_XO_32KHZ (0x2) > +#define PM800_32K_OUTX_SEL_HIZ (0x3) Why do these need to be in brackets? > /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ > > /* buck registers */ > @@ -208,6 +216,10 @@ enum { > #define PM800_PMOD_MEAS1 0x52 > #define PM800_PMOD_MEAS2 0x53 > > +/* Oscillator control */ > +#define PM800_OSC_CNTRL1 (0x50) > +#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1) > + > #define PM800_GPADC0_MEAS1 0x54 > #define PM800_GPADC0_MEAS2 0x55 > #define PM800_GPADC1_MEAS1 0x56
On Thursday 23 July 2015 09:22 PM, Lee Jones wrote: > On Tue, 21 Jul 2015, Vaibhav Hiremath wrote: > >> Update header file with required macros for 32KHz buffered clock >> output of 88PM800 family of device. >> These macros will be used in clk provider driver. >> >> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> >> --- >> include/linux/mfd/88pm80x.h | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h >> index 05d9bad..680e4eb 100644 >> --- a/include/linux/mfd/88pm80x.h >> +++ b/include/linux/mfd/88pm80x.h >> @@ -91,6 +91,7 @@ enum { >> /* Referance and low power registers */ >> #define PM800_LOW_POWER1 (0x20) >> #define PM800_LOW_POWER2 (0x21) >> +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5) >> >> #define PM800_LOW_POWER_CONFIG3 (0x22) >> #define PM800_LDOBK_FREEZE BIT(7) >> @@ -138,6 +139,13 @@ enum { >> #define PM800_ALARM BIT(5) >> #define PM800_RTC1_USE_XO BIT(7) >> >> +#define PM800_32K_OUTX_SEL_MASK (0x3) >> +/* 32KHz clk output sel mode */ >> +#define PM800_32K_OUTX_SEL_ZERO (0x0) >> +#define PM800_32K_OUTX_SEL_INT_32KHZ (0x1) >> +#define PM800_32K_OUTX_SEL_XO_32KHZ (0x2) >> +#define PM800_32K_OUTX_SEL_HIZ (0x3) > > Why do these need to be in brackets? > No specific reason, just made it consistent with other definitions in the file. I will fix in V2. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 05d9bad..680e4eb 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -91,6 +91,7 @@ enum { /* Referance and low power registers */ #define PM800_LOW_POWER1 (0x20) #define PM800_LOW_POWER2 (0x21) +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5) #define PM800_LOW_POWER_CONFIG3 (0x22) #define PM800_LDOBK_FREEZE BIT(7) @@ -138,6 +139,13 @@ enum { #define PM800_ALARM BIT(5) #define PM800_RTC1_USE_XO BIT(7) +#define PM800_32K_OUTX_SEL_MASK (0x3) +/* 32KHz clk output sel mode */ +#define PM800_32K_OUTX_SEL_ZERO (0x0) +#define PM800_32K_OUTX_SEL_INT_32KHZ (0x1) +#define PM800_32K_OUTX_SEL_XO_32KHZ (0x2) +#define PM800_32K_OUTX_SEL_HIZ (0x3) + /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ /* buck registers */ @@ -208,6 +216,10 @@ enum { #define PM800_PMOD_MEAS1 0x52 #define PM800_PMOD_MEAS2 0x53 +/* Oscillator control */ +#define PM800_OSC_CNTRL1 (0x50) +#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1) + #define PM800_GPADC0_MEAS1 0x54 #define PM800_GPADC0_MEAS2 0x55 #define PM800_GPADC1_MEAS1 0x56
Update header file with required macros for 32KHz buffered clock output of 88PM800 family of device. These macros will be used in clk provider driver. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> --- include/linux/mfd/88pm80x.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)