@@ -243,6 +243,9 @@ enum dwc2_ep0_state {
* 1 - SRP Only capable
* 2 - No HNP/SRP capable (always available)
* Defaults to best available option (0, 1, then 2)
+ * @otg_rev: The OTG revision number the device is compliant with,
+ * in binary-coded decimal (i.e. 2.0 is 0200H).
+ * (see struct usb_otg_caps)
* @host_dma: Specifies whether to use slave or DMA mode for accessing
* the data FIFOs. The driver will automatically detect the
* value for this parameter if none is specified.
@@ -458,6 +461,7 @@ struct dwc2_core_params {
#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1
#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
+ u16 otg_rev;
u8 phy_type;
#define DWC2_PHY_TYPE_PARAM_FS 0
#define DWC2_PHY_TYPE_PARAM_UTMI 1
@@ -1054,6 +1058,8 @@ struct dwc2_hregs_backup {
* @new_connection: Used in host mode. True if there are new connected
* device
* @enabled: Indicates the enabling state of controller
+ * @dw_otg_caps: OTG caps from the platform parameters, used to setup the
+ * gadget structure.
*
*/
struct dwc2_hsotg {
@@ -1220,6 +1226,7 @@ struct dwc2_hsotg {
unsigned int remote_wakeup_allowed:1;
struct dwc2_hsotg_ep *eps_in[MAX_EPS_CHANNELS];
struct dwc2_hsotg_ep *eps_out[MAX_EPS_CHANNELS];
+ struct usb_otg_caps dw_otg_caps;
#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
};
@@ -4945,6 +4945,7 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
hsotg->gadget.max_speed = USB_SPEED_HIGH;
hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
hsotg->gadget.name = dev_name(dev);
+ hsotg->gadget.otg_caps = &hsotg->dw_otg_caps;
hsotg->remote_wakeup_allowed = 0;
if (hsotg->params.lpm)
@@ -36,6 +36,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/usb/of.h>
#include "core.h"
@@ -246,18 +247,25 @@ static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
switch (hsotg->hw_params.op_mode) {
case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE;
+ hsotg->dw_otg_caps.hnp_support = true;
+ hsotg->dw_otg_caps.srp_support = true;
break;
case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE;
+ hsotg->dw_otg_caps.hnp_support = false;
+ hsotg->dw_otg_caps.srp_support = true;
break;
default:
val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ hsotg->dw_otg_caps.hnp_support = false;
+ hsotg->dw_otg_caps.srp_support = false;
break;
}
hsotg->params.otg_cap = val;
+ hsotg->dw_otg_caps.otg_rev = hsotg->params.otg_rev;
}
static void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg)
@@ -465,6 +473,9 @@ static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg)
}
}
+ if (hsotg->dr_mode == USB_DR_MODE_OTG)
+ of_usb_update_otg_caps(hsotg->dev->of_node, &hsotg->dw_otg_caps);
+
if (of_find_property(hsotg->dev->of_node, "disable-over-current", NULL))
p->oc_disable = true;
}
@@ -484,6 +495,7 @@ static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg)
case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ hsotg->dw_otg_caps.hnp_support = false;
break;
default:
valid = 0;
@@ -492,6 +504,8 @@ static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg)
break;
case DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE:
/* always valid */
+ hsotg->dw_otg_caps.hnp_support = false;
+ hsotg->dw_otg_caps.srp_support = false;
break;
default:
valid = 0;
Currently the dwc2 doesn't fill in the 'otg_caps' of usb_gadget structure. When registering a gadget device (e.g. via configfs), the usb_otg_descriptor_init() checks the 'otg_caps' and 'otg_rev'. It defaults to HNP and SRP bmAttributes if unspecified. There may be a mismatch with what's being set in dwc2 params structure. This result in the descriptors to be miss-configured in this case. So add an option to setup 'otg_caps' and 'otg_rev' in the params. It's then provided to the gadget struct. These parameters can then be tuned for each platform. In case it's not set, it will default to current behavior. Also add option to setup these from the device tree by calling of_usb_update_otg_caps(). This provides support for standard properties such as "otg-rev", "hnp-disable" and "srp-disable" (see usb-drd.yaml). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> --- drivers/usb/dwc2/core.h | 7 +++++++ drivers/usb/dwc2/gadget.c | 1 + drivers/usb/dwc2/params.c | 14 ++++++++++++++ 3 files changed, 22 insertions(+)