@@ -43,6 +43,7 @@ odpinclude_HEADERS = \
$(srcdir)/include/odp/ticketlock.h \
$(srcdir)/include/odp/time.h \
$(srcdir)/include/odp/timer.h \
+ $(srcdir)/include/odp/traffic_mngr.h \
$(srcdir)/include/odp/version.h
odpplatincludedir= $(includedir)/odp/plat
@@ -66,6 +67,7 @@ odpplatinclude_HEADERS = \
$(srcdir)/include/odp/plat/strong_types.h \
$(srcdir)/include/odp/plat/ticketlock_types.h \
$(srcdir)/include/odp/plat/timer_types.h \
+ $(srcdir)/include/odp/plat/traffic_mngr_types.h \
$(srcdir)/include/odp/plat/version_types.h
odpapiincludedir= $(includedir)/odp/api
new file mode 100644
@@ -0,0 +1,181 @@
+/* Copyright (c) 2015, Linaro Limited
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file
+ *
+ * ODP traffic mngr
+ */
+
+#ifndef ODP_TRAFFIC_MNGR_TYPES_H_
+#define ODP_TRAFFIC_MNGR_TYPES_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <odp/std_types.h>
+#include <odp/plat/strong_types.h>
+
+/** @addtogroup odp_queue ODP TRAFFIC MANAGER
+ * Macros and operation on a queue.
+ * @{
+ */
+
+/**> @todo Fill this in with what it's supposed to be */
+#define ODP_CYCLES_PER_SEC 100
+
+/** The ODP_TM_MAX_NUM_SYSTEMS constant specifies the maximum number of TM
+ * systems that may be created. On some platforms this might be much more
+ * limited to as little as one hardware TM system.
+ */
+#define ODP_TM_MAX_NUM_SYSTEMS 64
+
+/** The ODP_TM_MAX_PRIORITIES constant specifies the largest range of
+ * priorities that any TM system can support. All strict priority values MUST
+ * in the range 0..ODP_TM_MAX_PRIORITIES-1.
+ */
+#define ODP_TM_MAX_PRIORITIES 16
+
+/** The ODP_TM MAX_LEVELS constant specifies the largest range of
+ * tm_node levels that any TM system can support. Hence all tm_node level
+ * values MUST be in the range 0..ODP_TM_MAX_LEVELS-1. Smaller tm_node
+ * levels are associated with tm_nodes closer to the TM system egress.
+ */
+#define ODP_TM_MAX_LEVELS 8
+
+/**
+ * The smallest SCHED weight is 1 (i.e. 0 is not a legal WFQ/WRR value).
+ */
+#define ODP_TM_MIN_SCHED_WEIGHT 1
+
+/** The ODP_TM_MAX_SCHED_WEIGHT constant is the largest weight any TM system
+ * can support (at least from a configuration standpoint). A given TM system
+ * could have a smaller value.
+ */
+#define ODP_TM_MAX_SCHED_WEIGHT 255
+
+/** The ODP_TM_MAX_TM_QUEUES constant is the largest number of tm_queues
+ * that can handled by any one TM system.
+ */
+#define ODP_TM_MAX_TM_QUEUES (64 * 1024 * 1024)
+
+/** The ODP_TM_MAX_NUM_OUTPUTS constant is the largest number of outputs that
+ * can be configured for any one TM system.
+ */
+#define ODP_TM_MAX_NUM_OUTPUTS 256
+
+/** The ODP_TM_MAX_NUM_TM_NODES constant is the largest number of tm_nodes that
+ * can be in existence for any one TM system.
+ */
+#define ODP_TM_MAX_NUM_TM_NODES (1024 * 1024)
+
+/** The ODP_TM_MAX_TM_NODE_FANIN constant is the largest number of fan-in
+ * "inputs" that can be simultaneously connected to a single tm_node.
+ * *TBD* Does this need to be as large as ODP_TM_MAX_TM_QUEUES? *TBD*
+ */
+#define ODP_TM_MAX_TM_NODE_FANIN (1024 * 1024)
+
+/** The ODP_TM_MIN_SHAPER_BW constant is the smallest amount of bandwidth that
+ * can a shaper's peak or commit rate can be set to. It is in units of
+ * 1000 bytes/second so that it and the ODP_TM_MAX_SHAPER_BW can both fit in
+ * 32 bits.
+ */
+#define ODP_TM_MIN_SHAPER_BW 1
+
+/** The ODP_TM_MAX_SHAPER_BW constant is the largest amound of bandwidth that
+ * any shaper's peak or commit rate can be set to. It is in units of
+ * 1000 bytes/second so that it and the ODP_TM_MIN_SHAPER_BW can both fit in
+ * 32 bits.
+ */
+#define ODP_TM_MAX_SHAPER_BW 12500000
+
+/** The ODP_NUM_SHAPER_COLORS constant just counts the number of enumeration
+ * values defined in the odp_tm_shaper_color_t type.
+ */
+#define ODP_NUM_SHAPER_COLORS 3
+
+/** The INVALID_PRIORITY constant is used when one needs to indicate an
+ * invalid priority value.
+ */
+#define ODP_TM_INVALID_PRIORITY 255
+
+/** The odp_tm_percent_t type is used when specifying fields that are
+ * percentages. It is a fixed point integer whose units are 1/100 of a
+ * percent. Hence 100% is represented as the integer value 10000. Note
+ * that because it is often used as a ratio of the current queue value and
+ * maximum queue threshold, it can be > 100%, but in any event will never
+ * be larger than 500% (i.e. it MUST be capped at 50000).
+ */
+typedef uint16_t odp_tm_percent_t;
+
+/** The odp_tm_handle_t type is a generic type that can stand for any of the
+ * other ODP_TM handle types.
+ */
+typedef uint64_t odp_tm_handle_t;
+
+/** Each odp_tm_t value represents a specific TM system. Almost all
+ * functions in this API require a odp_tm_t value - either directly
+ * as a function parameter or indirectly by having another ODP TM handle value
+ * as a function parameter.
+ */
+typedef odp_tm_handle_t odp_tm_t;
+
+/** Each odp_tm_queue_t value is an opaque ODP handle representing a specific
+ * tm_queue within a specific TM system.
+ */
+typedef odp_tm_handle_t odp_tm_queue_t;
+
+/** Each odp_tm_node_t value is an opaque ODP handle representing a specific
+ * tm_node within a specific TM system.
+ */
+typedef odp_tm_handle_t odp_tm_node_t;
+
+/** Each odp_tm_shaper_t value is an opaque ODP handle representing a specific
+ * shaper profile usable across all TM systems described by this API. A given
+ * shaper profile can then be attached to any tm_queue or tm_node.
+ */
+typedef odp_tm_handle_t odp_tm_shaper_t;
+
+/** Each odp_tm_sched_t value is an opaque ODP handle representing a specific
+ * tm_node scheduler profile usable across all TM systems described by this
+ * API. A given tm_node scheduler profile can then be attached to any tm_node.
+ */
+typedef odp_tm_handle_t odp_tm_sched_t;
+
+/** Each odp_tm_threshold_t value is an opaque ODP handle representing a
+ * specific queue threshold profile usable across all TM systems described by
+ * this API. A given queue threshold profile can then be attached to any
+ * tm_queue or tm_node.
+ */
+typedef odp_tm_handle_t odp_tm_threshold_t;
+
+/** Each odp_tm_wred_t value is an opaque ODP handle representing a specific
+ * WRED profile usable across all TM systems described by this API. A given
+ * WRED profile can then be attached to any tm_queue or tm_node.
+ */
+typedef odp_tm_handle_t odp_tm_wred_t;
+
+/** The ODP_TM_INVALID constant can be used with any ODP TM handle type and
+ * indicates that this value does NOT represent a valid TM object.
+ */
+#define ODP_TM_INVALID 0
+
+/** Get printable format of odp_queue_t */
+static inline uint64_t odp_tm_handle_to_u64(odp_tm_handle_t hdl)
+{
+ return hdl;
+}
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
new file mode 100644
@@ -0,0 +1,35 @@
+/* Copyright (c) 2015, Linaro Limited
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/**
+ * @file
+ *
+ * ODP Traffic manager
+ */
+
+#ifndef ODP_PLAT_TRAFFIC_MNGR_H_
+#define ODP_PLAT_TRAFFIC_MNGR_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @ingroup odp_traffic_mngr
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#include <odp/plat/traffic_mngr_types.h>
+#include <odp/api/traffic_mngr.h>
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif