@@ -72,7 +72,7 @@ static int rx_helper(struct wfx_dev *wdev, size_t read_len, int *is_cnf)
int piggyback = 0;
WARN(read_len > round_down(0xFFF, 2) * sizeof(u16),
- "%s: request exceed WFx capability", __func__);
+ "%s: request exceed the chip capability", __func__);
// Add 2 to take into account piggyback size
alloc_len = wdev->hwbus_ops->align_size(wdev->hwbus_priv, read_len + 2);
@@ -181,7 +181,7 @@ static void tx_helper(struct wfx_dev *wdev, struct hif_msg *hif)
data = hif;
WARN(len > wdev->hw_caps.size_inp_ch_buf,
- "%s: request exceed WFx capability: %zu > %d\n", __func__,
+ "%s: request exceed the chip capability: %zu > %d\n", __func__,
len, wdev->hw_caps.size_inp_ch_buf);
len = wdev->hwbus_ops->align_size(wdev->hwbus_priv, len);
ret = wfx_data_write(wdev, data, len);
@@ -39,9 +39,9 @@ struct wfx_spi_priv {
};
/*
- * WFx chip read data 16bits at time and place them directly into (little
- * endian) CPU register. So, chip expect byte order like "B1 B0 B3 B2" (while
- * LE is "B0 B1 B2 B3" and BE is "B3 B2 B1 B0")
+ * The chip reads 16bits of data at time and place them directly into (little
+ * endian) CPU register. So, the chip expects bytes order to be "B1 B0 B3 B2"
+ * (while LE is "B0 B1 B2 B3" and BE is "B3 B2 B1 B0")
*
* A little endian host with bits_per_word == 16 should do the right job
* natively. The code below to support big endian host and commonly used SPI
@@ -31,8 +31,8 @@ static int wfx_get_hw_rate(struct wfx_dev *wdev,
}
return rate->idx + 14;
}
- // WFx only support 2GHz, else band information should be retrieved
- // from ieee80211_tx_info
+ // The device only support 2GHz, else band information should be
+ // retrieved from ieee80211_tx_info
band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
if (rate->idx >= band->n_bitrates) {
WARN(1, "wrong rate->idx value: %d", rate->idx);
@@ -207,8 +207,8 @@ static int upload_firmware(struct wfx_dev *wdev, const u8 *data, size_t len)
if (ret < 0)
return ret;
- // WFx seems to not support writing 0 in this register during
- // first loop
+ // The device seems to not support writing 0 in this register
+ // during first loop
offs += DNLD_BLOCK_SIZE;
ret = sram_reg_write(wdev, WFX_DCA_PUT, offs);
if (ret < 0)
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: Apache-2.0 */
/*
- * WFx hardware interface definitions
+ * WF200 hardware interface definitions
*
* Copyright (c) 2018-2020, Silicon Laboratories Inc.
*/
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: Apache-2.0 */
/*
- * WFx hardware interface definitions
+ * WF200 hardware interface definitions
*
* Copyright (c) 2018-2020, Silicon Laboratories Inc.
*/
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: Apache-2.0 */
/*
- * WFx hardware interface definitions
+ * WF200 hardware interface definitions
*
* Copyright (c) 2018-2020, Silicon Laboratories Inc.
*/
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Implementation of chip-to-host event (aka indications) of WFxxx Split Mac
- * (WSM) API.
+ * Handling of the chip-to-host events (aka indications) of the hardware API.
*
* Copyright (c) 2017-2020, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
@@ -1,7 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Implementation of chip-to-host event (aka indications) of WFxxx Split Mac
- * (WSM) API.
+ * Handling of the chip-to-host events (aka indications) of the hardware API.
*
* Copyright (c) 2017-2019, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Implementation of host-to-chip commands (aka request/confirmation) of WFxxx
- * Split Mac (WSM) API.
+ * Implementation of the host-to-chip commands (aka request/confirmation) of the
+ * hardware API.
*
* Copyright (c) 2017-2020, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
@@ -28,7 +28,7 @@ static void wfx_fill_header(struct hif_msg *hif, int if_id,
if (if_id == -1)
if_id = 2;
- WARN(cmd > 0x3f, "invalid WSM command %#.2x", cmd);
+ WARN(cmd > 0x3f, "invalid hardware command %#.2x", cmd);
WARN(size > 0xFFF, "requested buffer is too large: %zu bytes", size);
WARN(if_id > 0x3, "invalid interface ID %d", if_id);
@@ -108,12 +108,10 @@ int wfx_cmd_send(struct wfx_dev *wdev, struct hif_msg *request,
mib_sep = "/";
}
if (ret < 0)
- dev_err(wdev->dev,
- "WSM request %s%s%s (%#.2x) on vif %d returned error %d\n",
+ dev_err(wdev->dev, "hardware request %s%s%s (%#.2x) on vif %d returned error %d\n",
get_hif_name(cmd), mib_sep, mib_name, cmd, vif, ret);
if (ret > 0)
- dev_warn(wdev->dev,
- "WSM request %s%s%s (%#.2x) on vif %d returned status %d\n",
+ dev_warn(wdev->dev, "hardware request %s%s%s (%#.2x) on vif %d returned status %d\n",
get_hif_name(cmd), mib_sep, mib_name, cmd, vif, ret);
return ret;
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Implementation of host-to-chip commands (aka request/confirmation) of WFxxx
- * Split Mac (WSM) API.
+ * Implementation of the host-to-chip commands (aka request/confirmation) of the
+ * hardware API.
*
* Copyright (c) 2017-2020, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Implementation of host-to-chip MIBs of WFxxx Split Mac (WSM) API.
+ * Implementation of the host-to-chip MIBs of the hardware API.
*
* Copyright (c) 2017-2020, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Implementation of host-to-chip MIBs of WFxxx Split Mac (WSM) API.
+ * Implementation of the host-to-chip MIBs of the hardware API.
*
* Copyright (c) 2017-2020, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
@@ -35,7 +35,7 @@
#define WFX_PDS_MAX_SIZE 1500
-MODULE_DESCRIPTION("Silicon Labs 802.11 Wireless LAN driver for WFx");
+MODULE_DESCRIPTION("Silicon Labs 802.11 Wireless LAN driver for WF200");
MODULE_AUTHOR("Jérôme Pouiller <jerome.pouiller@silabs.com>");
MODULE_LICENSE("GPL");
@@ -24,7 +24,7 @@ u32 wfx_rate_mask_to_hw(struct wfx_dev *wdev, u32 rates)
{
int i;
u32 ret = 0;
- // WFx only support 2GHz
+ // The device only supports 2GHz
struct ieee80211_supported_band *sband = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
for (i = 0; i < sband->n_bitrates; i++) {
@@ -242,8 +242,6 @@ int wfx_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
return 0;
}
-/* WSM callbacks */
-
void wfx_event_report_rssi(struct wfx_vif *wvif, u8 raw_rcpi_rssi)
{
/* RSSI: signed Q8.0, RCPI: unsigned Q7.1
@@ -59,7 +59,7 @@ void wfx_unassign_vif_chanctx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_chanctx_conf *conf);
-// WSM Callbacks
+// Hardware API Callbacks
void wfx_cooling_timeout_work(struct work_struct *work);
void wfx_suspend_hot_dev(struct wfx_dev *wdev, enum sta_notify_cmd cmd);
void wfx_suspend_resume_mc(struct wfx_vif *wvif, enum sta_notify_cmd cmd);
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
- * Common private data for Silicon Labs WFx chips.
+ * Common private data.
*
* Copyright (c) 2017-2020, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson