diff mbox series

[5/6] dt-bindings: clock: Document Exynos850 CMU bindings

Message ID 20210914155607.14122-6-semen.protsenko@linaro.org
State New
Headers show
Series clk: samsung: Introduce Exynos850 SoC clock driver | expand

Commit Message

Sam Protsenko Sept. 14, 2021, 3:56 p.m. UTC
Provide dt-schema documentation for Exynos850 SoC clock controller.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

---
 .../clock/samsung,exynos850-clock.yaml        | 190 ++++++++++++++++++
 1 file changed, 190 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml

-- 
2.30.2

Comments

Rob Herring (Arm) Sept. 14, 2021, 9:35 p.m. UTC | #1
On Tue, 14 Sep 2021 18:56:06 +0300, Sam Protsenko wrote:
> Provide dt-schema documentation for Exynos850 SoC clock controller.

> 

> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

> ---

>  .../clock/samsung,exynos850-clock.yaml        | 190 ++++++++++++++++++

>  1 file changed, 190 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml

> 


My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/clock/samsung,exynos850-clock.example.dt.yaml:0:0: /example-2/serial@13820000: failed to match any schema with compatible: ['samsung,exynos850-uart']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1528063

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Krzysztof Kozlowski Sept. 15, 2021, 8:28 a.m. UTC | #2
On 14/09/2021 17:56, Sam Protsenko wrote:
> Provide dt-schema documentation for Exynos850 SoC clock controller.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
>  .../clock/samsung,exynos850-clock.yaml        | 190 ++++++++++++++++++
>  1 file changed, 190 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> new file mode 100644
> index 000000000000..b69ba4125421
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> @@ -0,0 +1,190 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos850 SoC clock controller
> +
> +maintainers:
> +  - Sam Protsenko <semen.protsenko@linaro.org>
> +  - Chanwoo Choi <cw00.choi@samsung.com>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> +  - Sylwester Nawrocki <s.nawrocki@samsung.com>
> +  - Tomasz Figa <tomasz.figa@gmail.com>
> +
> +description: |
> +  Exynos850 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. Root clocks in that clock tree are
> +  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
> +  clocks must be defined as fixed-rate clocks in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks that available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'dt-bindings/clock/exynos850.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,exynos850-cmu-top
> +      - samsung,exynos850-cmu-core
> +      - samsung,exynos850-cmu-hsi
> +      - samsung,exynos850-cmu-peri
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 5
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 5
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-top
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-core
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +            - description: CMU_CORE bus clock (from CMU_TOP)
> +            - description: CCI clock (from CMU_TOP)
> +            - description: eMMC clock (from CMU_TOP)
> +            - description: SSS clock (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: dout_core_bus
> +            - const: dout_core_cci
> +            - const: dout_core_mmc_embd
> +            - const: dout_core_sss
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-hsi
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +            - description: External RTC clock (32768 Hz)
> +            - description: CMU_HSI bus clock (from CMU_TOP)
> +            - description: SD card clock (from CMU_TOP)
> +            - description: "USB 2.0 DRD clock (from CMU_TOP)"
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: rtcclk
> +            - const: dout_hsi_bus
> +            - const: dout_hsi_mmc_card
> +            - const: dout_hsi_usb20drd
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-peri
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +            - description: CMU_PERI bus clock (from CMU_TOP)
> +            - description: UART clock (from CMU_TOP)
> +            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: dout_peri_bus
> +            - const: dout_peri_uart
> +            - const: dout_peri_ip
> +
> +required:
> +  - compatible
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock controller node for CMU_PERI
> +  - |
> +    #include <dt-bindings/clock/exynos850.h>
> +
> +    cmu_peri: clock-controller@10030000 {
> +        compatible = "samsung,exynos850-cmu-peri";
> +        reg = <0x10030000 0x8000>;
> +        #clock-cells = <1>;
> +
> +        clocks = <&oscclk>, <&cmu_top DOUT_PERI_BUS>,
> +                 <&cmu_top DOUT_PERI_UART>,
> +                 <&cmu_top DOUT_PERI_IP>;
> +        clock-names = "oscclk", "dout_peri_bus",
> +                      "dout_peri_uart", "dout_peri_ip";
> +    };
> +
> +  # External reference clock (should be provided in particular board DTS)
> +  - |
> +    oscclk: clock-oscclk {
> +        compatible = "fixed-clock";
> +        #clock-cells = <0>;
> +        clock-output-names = "oscclk";
> +        clock-frequency = <26000000>;
> +    };

Skip ossclk - it's trivial and not related to these bindings.

> +
> +  # UART controller node that consumes the clock generated by CMU_PERI
> +  - |
> +    #include <dt-bindings/clock/exynos850.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    serial_0: serial@13820000 {
> +        compatible = "samsung,exynos850-uart";
> +        reg = <0x13820000 0x100>;
> +        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&uart0_pins>;
> +        clocks = <&cmu_peri GOUT_UART_PCLK>, <&cmu_peri GOUT_UART_IPCLK>;
> +        clock-names = "uart", "clk_uart_baud0";

The same, skip it because it is trivial and common with all clock providers.

Also Rob's robot checker complains about it.

Best regards,
Krzysztof
Chanwoo Choi Sept. 15, 2021, 4:47 p.m. UTC | #3
On 21. 9. 15. 오전 12:56, Sam Protsenko wrote:
> Provide dt-schema documentation for Exynos850 SoC clock controller.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
>   .../clock/samsung,exynos850-clock.yaml        | 190 ++++++++++++++++++
>   1 file changed, 190 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> new file mode 100644
> index 000000000000..b69ba4125421
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> @@ -0,0 +1,190 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos850 SoC clock controller
> +
> +maintainers:
> +  - Sam Protsenko <semen.protsenko@linaro.org>
> +  - Chanwoo Choi <cw00.choi@samsung.com>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> +  - Sylwester Nawrocki <s.nawrocki@samsung.com>
> +  - Tomasz Figa <tomasz.figa@gmail.com>
> +
> +description: |
> +  Exynos850 clock controller is comprised of several CMU units, generating
> +  clocks for different domains. Those CMU units are modeled as separate device
> +  tree nodes, and might depend on each other. Root clocks in that clock tree are
> +  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
> +  clocks must be defined as fixed-rate clocks in dts.
> +
> +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> +
> +  Each clock is assigned an identifier and client nodes can use this identifier
> +  to specify the clock which they consume. All clocks that available for usage
> +  in clock consumer nodes are defined as preprocessor macros in
> +  'dt-bindings/clock/exynos850.h' header.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,exynos850-cmu-top
> +      - samsung,exynos850-cmu-core
> +      - samsung,exynos850-cmu-hsi
> +      - samsung,exynos850-cmu-peri
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 5
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 5
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-top
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-core
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +            - description: CMU_CORE bus clock (from CMU_TOP)
> +            - description: CCI clock (from CMU_TOP)
> +            - description: eMMC clock (from CMU_TOP)
> +            - description: SSS clock (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: dout_core_bus
> +            - const: dout_core_cci
> +            - const: dout_core_mmc_embd
> +            - const: dout_core_sss
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-hsi
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +            - description: External RTC clock (32768 Hz)
> +            - description: CMU_HSI bus clock (from CMU_TOP)
> +            - description: SD card clock (from CMU_TOP)
> +            - description: "USB 2.0 DRD clock (from CMU_TOP)"
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: rtcclk
> +            - const: dout_hsi_bus
> +            - const: dout_hsi_mmc_card
> +            - const: dout_hsi_usb20drd
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: samsung,exynos850-cmu-peri
> +
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: External reference clock (26 MHz)
> +            - description: CMU_PERI bus clock (from CMU_TOP)
> +            - description: UART clock (from CMU_TOP)
> +            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
> +
> +        clock-names:
> +          items:
> +            - const: oscclk
> +            - const: dout_peri_bus
> +            - const: dout_peri_uart
> +            - const: dout_peri_ip
> +
> +required:
> +  - compatible
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # Clock controller node for CMU_PERI
> +  - |
> +    #include <dt-bindings/clock/exynos850.h>
> +
> +    cmu_peri: clock-controller@10030000 {
> +        compatible = "samsung,exynos850-cmu-peri";
> +        reg = <0x10030000 0x8000>;
> +        #clock-cells = <1>;
> +
> +        clocks = <&oscclk>, <&cmu_top DOUT_PERI_BUS>,
> +                 <&cmu_top DOUT_PERI_UART>,
> +                 <&cmu_top DOUT_PERI_IP>;
> +        clock-names = "oscclk", "dout_peri_bus",
> +                      "dout_peri_uart", "dout_peri_ip";
> +    };
> +
> +  # External reference clock (should be provided in particular board DTS)
> +  - |
> +    oscclk: clock-oscclk {
> +        compatible = "fixed-clock";
> +        #clock-cells = <0>;
> +        clock-output-names = "oscclk";
> +        clock-frequency = <26000000>;
> +    };
> +
> +  # UART controller node that consumes the clock generated by CMU_PERI
> +  - |
> +    #include <dt-bindings/clock/exynos850.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    serial_0: serial@13820000 {
> +        compatible = "samsung,exynos850-uart";
> +        reg = <0x13820000 0x100>;
> +        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&uart0_pins>;
> +        clocks = <&cmu_peri GOUT_UART_PCLK>, <&cmu_peri GOUT_UART_IPCLK>;
> +        clock-names = "uart", "clk_uart_baud0";
> +    };
> +
> +...
> 

Looks good for very detailed description and example. Thanks.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
new file mode 100644
index 000000000000..b69ba4125421
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -0,0 +1,190 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos850 SoC clock controller
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos850 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
+  clocks must be defined as fixed-rate clocks in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks that available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos850.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: eMMC clock (from CMU_TOP)
+            - description: SSS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_mmc_embd
+            - const: dout_core_sss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-hsi
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: External RTC clock (32768 Hz)
+            - description: CMU_HSI bus clock (from CMU_TOP)
+            - description: SD card clock (from CMU_TOP)
+            - description: "USB 2.0 DRD clock (from CMU_TOP)"
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: rtcclk
+            - const: dout_hsi_bus
+            - const: dout_hsi_mmc_card
+            - const: dout_hsi_usb20drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: UART clock (from CMU_TOP)
+            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_uart
+            - const: dout_peri_ip
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+
+    cmu_peri: clock-controller@10030000 {
+        compatible = "samsung,exynos850-cmu-peri";
+        reg = <0x10030000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>, <&cmu_top DOUT_PERI_BUS>,
+                 <&cmu_top DOUT_PERI_UART>,
+                 <&cmu_top DOUT_PERI_IP>;
+        clock-names = "oscclk", "dout_peri_bus",
+                      "dout_peri_uart", "dout_peri_ip";
+    };
+
+  # External reference clock (should be provided in particular board DTS)
+  - |
+    oscclk: clock-oscclk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-output-names = "oscclk";
+        clock-frequency = <26000000>;
+    };
+
+  # UART controller node that consumes the clock generated by CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial_0: serial@13820000 {
+        compatible = "samsung,exynos850-uart";
+        reg = <0x13820000 0x100>;
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart0_pins>;
+        clocks = <&cmu_peri GOUT_UART_PCLK>, <&cmu_peri GOUT_UART_IPCLK>;
+        clock-names = "uart", "clk_uart_baud0";
+    };
+
+...