@@ -2092,6 +2092,23 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
return false;
}
+static int rockchip_pinconf_defer_output(struct rockchip_pin_bank *bank,
+ unsigned int pin, u32 arg)
+{
+ struct rockchip_pin_output_deferred *cfg;
+
+ cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ cfg->pin = pin;
+ cfg->arg = arg;
+
+ list_add_tail(&cfg->head, &bank->deferred_output);
+
+ return 0;
+}
+
/* set the pin config settings for a specified pin */
static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned num_configs)
@@ -2136,6 +2153,22 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (rc != RK_FUNC_GPIO)
return -EINVAL;
+ /*
+ * Check for gpio driver not being probed yet.
+ * The lock makes sure that either gpio-probe has completed
+ * or the gpio driver hasn't probed yet.
+ */
+ mutex_lock(&bank->deferred_lock);
+ if (!gpio || !gpio->direction_output) {
+ rc = rockchip_pinconf_defer_output(bank, pin - bank->pin_base, arg);
+ mutex_unlock(&bank->deferred_lock);
+ if (rc)
+ return rc;
+
+ break;
+ }
+ mutex_unlock(&bank->deferred_lock);
+
rc = gpio->direction_output(gpio, pin - bank->pin_base,
arg);
if (rc)
@@ -2204,6 +2237,11 @@ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
if (rc != RK_FUNC_GPIO)
return -EINVAL;
+ if (!gpio || !gpio->get) {
+ arg = 0;
+ break;
+ }
+
rc = gpio->get(gpio, pin - bank->pin_base);
if (rc < 0)
return rc;
@@ -2450,6 +2488,9 @@ static int rockchip_pinctrl_register(struct platform_device *pdev,
pin_bank->name, pin);
pdesc++;
}
+
+ INIT_LIST_HEAD(&pin_bank->deferred_output);
+ mutex_init(&pin_bank->deferred_lock);
}
ret = rockchip_pinctrl_parse_dt(pdev, info);
@@ -2716,6 +2757,31 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
return 0;
}
+static int rockchip_pinctrl_remove(struct platform_device *pdev)
+{
+ struct rockchip_pinctrl *info = platform_get_drvdata(pdev);
+ struct rockchip_pin_bank *bank;
+ struct rockchip_pin_output_deferred *cfg;
+ int i;
+
+ of_platform_depopulate(&pdev->dev);
+
+ for (i = 0; i < info->ctrl->nr_banks; i++) {
+ bank = &info->ctrl->pin_banks[i];
+
+ mutex_lock(&bank->deferred_lock);
+ while (!list_empty(&bank->deferred_output)) {
+ cfg = list_first_entry(&bank->deferred_output,
+ struct rockchip_pin_output_deferred, head);
+ list_del(&cfg->head);
+ kfree(cfg);
+ }
+ mutex_unlock(&bank->deferred_lock);
+ }
+
+ return 0;
+}
+
static struct rockchip_pin_bank px30_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
@@ -3175,6 +3241,7 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = {
static struct platform_driver rockchip_pinctrl_driver = {
.probe = rockchip_pinctrl_probe,
+ .remove = rockchip_pinctrl_remove,
.driver = {
.name = "rockchip-pinctrl",
.pm = &rockchip_pinctrl_dev_pm_ops,
@@ -141,6 +141,8 @@ struct rockchip_drv {
* @toggle_edge_mode: bit mask to toggle (falling/rising) edge mode
* @recalced_mask: bit mask to indicate a need to recalulate the mask
* @route_mask: bits describing the routing pins of per bank
+ * @deferred_output: gpio output settings to be done after gpio bank probed
+ * @deferred_lock: mutex for the deferred_output shared btw gpio and pinctrl
*/
struct rockchip_pin_bank {
struct device *dev;
@@ -169,6 +171,8 @@ struct rockchip_pin_bank {
u32 toggle_edge_mode;
u32 recalced_mask;
u32 route_mask;
+ struct list_head deferred_output;
+ struct mutex deferred_lock;
};
/**
@@ -243,6 +247,12 @@ struct rockchip_pin_config {
unsigned int nconfigs;
};
+struct rockchip_pin_output_deferred {
+ struct list_head head;
+ unsigned int pin;
+ u32 arg;
+};
+
/**
* struct rockchip_pin_group: represent group of pins of a pinmux function.
* @name: name of the pin group, used to lookup the group.
The separation of pinctrl and gpio drivers created a tiny window where a pinconfig setting might produce a null-pointer dereference. The affected device were rk3288-veyron devices in this case. Pinctrl-hogs are claimed when the pinctrl driver is registered, at which point their pinconfig settings will be applied. At this time the now separate gpio devices will not have been created yet and the matching driver won't have probed yet, making the gpio->foo() call run into a null-ptr. As probing is not really guaranteed to have been completed at a specific time, introduce a queue that can hold the output settings until the gpio driver has probed and will (in a separate patch) fetch the elements of the list. We expect the gpio driver to empty the list, but will nevertheless empty it ourself on remove if that didn't happen. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/pinctrl/pinctrl-rockchip.c | 67 ++++++++++++++++++++++++++++++ drivers/pinctrl/pinctrl-rockchip.h | 10 +++++ 2 files changed, 77 insertions(+)