diff mbox series

[v7,5/7] ARM: tegra: Add new properties to USB PHY device-tree nodes

Message ID 20210912181718.1328-6-digetx@gmail.com
State New
Headers show
Series [v7,1/7] dt-bindings: phy: tegra20-usb-phy: Convert to schema | expand

Commit Message

Dmitry Osipenko Sept. 12, 2021, 6:17 p.m. UTC 
Add new properties to USB PHYs needed for enabling USB OTG mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra114.dtsi | 4 ++++
 arch/arm/boot/dts/tegra124.dtsi | 6 ++++++
 arch/arm/boot/dts/tegra20.dtsi  | 6 ++++++
 arch/arm/boot/dts/tegra30.dtsi  | 6 ++++++
 4 files changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index fb99b3e971c3..b391c7940b8f 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -706,6 +706,7 @@  phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,6 +726,7 @@  phy1: usb-phy@7d000000 {
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -744,6 +746,7 @@  phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +765,7 @@  phy3: usb-phy@7d008000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 8b38f123f554..ee28bb2b01ba 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -1094,6 +1094,7 @@  phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USBD>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1113,6 +1114,7 @@  phy1: usb-phy@7d000000 {
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -1132,6 +1134,7 @@  phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB2>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1150,6 +1153,7 @@  phy2: usb-phy@7d004000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -1169,6 +1173,7 @@  phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB3>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1187,6 +1192,7 @@  phy3: usb-phy@7d008000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f3080b05b2ba..29342712aa63 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -876,6 +876,7 @@  phy1: usb-phy@c5000000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5000000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USBD>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -894,6 +895,7 @@  phy1: usb-phy@c5000000 {
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -914,6 +916,7 @@  usb@c5004000 {
 	phy2: usb-phy@c5004000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "ulpi";
 		clocks = <&tegra_car TEGRA20_CLK_USB2>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -922,6 +925,7 @@  phy2: usb-phy@c5004000 {
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		#phy-cells = <0>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -943,6 +947,7 @@  phy3: usb-phy@c5008000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5008000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USB3>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -959,6 +964,7 @@  phy3: usb-phy@c5008000 {
 		nvidia,xcvr-setup = <9>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 6fd349a9a47f..2a90b4e10834 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -1148,6 +1148,7 @@  phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USBD>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1168,6 +1169,7 @@  phy1: usb-phy@7d000000 {
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
@@ -1189,6 +1191,7 @@  phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d004000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB2>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1208,6 +1211,7 @@  phy2: usb-phy@7d004000 {
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -1229,6 +1233,7 @@  phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB3>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1248,6 +1253,7 @@  phy3: usb-phy@7d008000 {
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};