diff mbox series

[v7,6/7] ARM: tegra: nexus7: Enable USB OTG mode

Message ID 20210912181718.1328-7-digetx@gmail.com
State Accepted
Commit 98473f283b87dd5efbf46f40fb268e8d2005d8d7
Headers show
Series Add OTG mode support to Tegra USB PHY and Nexus 7 | expand

Commit Message

Dmitry Osipenko Sept. 12, 2021, 6:17 p.m. UTC
Nexus 7 has OTG-cable microUSB port, enable OTG mode. USB peripheral
devices now can be connected to Nexus 7 using OTG adapter, switching
USB port into host mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../tegra30-asus-nexus7-grouper-common.dtsi   | 25 +++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index 4f116c26f6ce..798ac22a50d2 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -941,9 +941,29 @@  power_supply: charger@6a {
 			interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
 
 			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+			summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
 			summit,enable-usb-charging;
 
 			monitored-battery = <&battery_cell>;
+
+			usb_vbus: usb-vbus {
+				regulator-name = "usb_vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-min-microamp = <750000>;
+				regulator-max-microamp = <750000>;
+
+				/*
+				 * SMB347 INOK input pin is connected to PMIC's
+				 * ACOK output, which is fixed to ACTIVE_LOW as
+				 * long as battery voltage is in a good range.
+				 *
+				 * Active INOK disables SMB347 output, so polarity
+				 * needs to be toggled when we want to get the
+				 * output.
+				 */
+				summit,needs-inok-toggle;
+			};
 		};
 	};
 
@@ -1017,12 +1037,13 @@  sdmmc4: mmc@78000600 {
 	usb@7d000000 {
 		compatible = "nvidia,tegra30-udc";
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
+		vbus-supply = <&usb_vbus>;
 	};
 
 	usb-phy@7d000000 {
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;