| Message ID | 1436442431-3471-6-git-send-email-vaibhav.hiremath@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Saturday 11 July 2015 12:46 PM, Krzysztof Kozlowski wrote: > W dniu 09.07.2015 o 20:47, Vaibhav Hiremath pisze: >> 88PM860 family of device supports dual phase mode on BUCK1 supply >> providing total 6A capacity. >> Note that by default they operate independently with 3A capacity. >> >> This patch adds the devicetree binding to enable this >> feature. >> >> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> >> --- >> Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt >> index ae1311c..c756b31 100644 >> --- a/Documentation/devicetree/bindings/mfd/88pm800.txt >> +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt >> @@ -15,6 +15,12 @@ Optional properties : >> CLK32K3 - for 88pm800 >> CLK32K2 - for 88pm860 >> >> + (Applicable only to PXA910 family): >> + >> + - marvell,88pm860-buck1-dualphase-en : If set, enable dual phase on BUCK1, >> + providing 6A capacity. >> + Without this both BUCK1A and BUCK1B operates independently with 3A capacity. >> + > > 1. How does this relates to regulator driver? The > drivers/regulator/88pm800.c defines constraints for regulator which may > be contradictory. > > 2. This looks like a job for regulator driver, not MFD. Then you could > use standard regulator bindings (setting maximum current to 6A would > change the regulator to different mode). Make sense. and even better. I believe you are referring to, regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; And provide set_current_limit() callback, to set the dualphase. Just to clarify more on this, The DT property would look something like, regulators { compatible = "marvell,88pm80x-regulator"; buck1a: BUCK1A { regulator-compatible = "buck1"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; regulator-boot-on; regulator-always-on; }; buck1b: BUCK1B { regulator-compatible = "buck1b"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; regulator-min-microamp = <3000000>; regulator-max-microamp = <6000000>; regulator-boot-on; regulator-always-on; }; }; And for the platforms, where dual phase is not required, we can either choose not to set these properties or set it to regulator-min-microamp = <3000000>; regulator-max-microamp = <3000000>; Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt index ae1311c..c756b31 100644 --- a/Documentation/devicetree/bindings/mfd/88pm800.txt +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt @@ -15,6 +15,12 @@ Optional properties : CLK32K3 - for 88pm800 CLK32K2 - for 88pm860 + (Applicable only to PXA910 family): + + - marvell,88pm860-buck1-dualphase-en : If set, enable dual phase on BUCK1, + providing 6A capacity. + Without this both BUCK1A and BUCK1B operates independently with 3A capacity. + 88pm80x family of devices consists of varied group of sub-devices: Device Supply Names Description
88PM860 family of device supports dual phase mode on BUCK1 supply providing total 6A capacity. Note that by default they operate independently with 3A capacity. This patch adds the devicetree binding to enable this feature. Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org> --- Documentation/devicetree/bindings/mfd/88pm800.txt | 6 ++++++ 1 file changed, 6 insertions(+)