diff mbox series

[4/9] iARM: dts: renesas: Add compatible properties to LAN8710A Ethernet PHYs

Message ID 247dc2074dae149af07b6d014985ad30eb362eda.1631174218.git.geert+renesas@glider.be
State New
Headers show
Series renesas: Add compatible properties to Ethernet PHY nodes | expand

Commit Message

Geert Uytterhoeven Sept. 9, 2021, 8:49 a.m. UTC 
Add compatible values to Ethernet PHY subnodes representing SMSC
LAN8710A PHYs on RZ/A1 and R-Mobile A1 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
I could not verify the PHY revision number (least significant nibble of
the ID) on gr-peach, due to lack of hardware.
---
 arch/arm/boot/dts/r7s72100-gr-peach.dts       | 2 ++
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 ++
 2 files changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index 2562cc9b53564915..105f9c71f9fd54f4 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -129,6 +129,8 @@  &ether {
 	phy-handle = <&phy0>;
 
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f0",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 
 		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index ab7034f2f9fc157c..f052f8bade5d9c78 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -180,6 +180,8 @@  &ether {
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f1",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 	};
 };