diff mbox series

[7/9] arm64: dts: renesas: Add compatible properties to AR8031 Ethernet PHYs

Message ID 3f1b58756f149f0c634c66abaecc88e699f4c3cc.1631174218.git.geert+renesas@glider.be
State Accepted
Commit 18a2427146bf8a3da8fc7825051d6aadb9c2d8fb
Headers show
Series renesas: Add compatible properties to Ethernet PHY nodes | expand

Commit Message

Geert Uytterhoeven Sept. 9, 2021, 8:49 a.m. UTC
Add compatible values to Ethernet PHY subnodes representing Atheros
AR8031 PHYs on RZ/G2 boards.  This allows software to identify the PHY
model at any time, regardless of the state of the PHY reset line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 090dc9c4f57b5be1..a06cf770c12faa90 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -58,6 +58,8 @@  &avb {
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id004d.d074",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;