diff mbox series

[5/9] ARM: dts: renesas: Add compatible properties to RTL8201FL Ethernet PHYs

Message ID a23eca16869457684b0300379233e335b4e2047e.1631174218.git.geert+renesas@glider.be
State Accepted
Commit 054fe41dace8bc54eca220dcabfd918b115e8be0
Headers show
Series renesas: Add compatible properties to Ethernet PHY nodes | expand

Commit Message

Geert Uytterhoeven Sept. 9, 2021, 8:49 a.m. UTC
Add compatible values to Ethernet PHY subnodes representing Realtek
RTL8201FL PHYs on RZ/A2 boards.  This allows software to identify the
PHY model at any time, regardless of the state of the PHY reset line.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r7s9210-rza2mevb.dts | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index ececb1bc995a5918..9c0d9686fe01133b 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -100,6 +100,8 @@  &ether1 {
 	renesas,no-ether-link;
 	phy-handle = <&phy1>;
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c816",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 	};
 };