diff mbox series

[v4,13/18] soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl

Message ID 20210910202640.980366-14-l.stach@pengutronix.de
State Accepted
Commit 926e57c065dfcf5a824b206760330f32e786dd8c
Headers show
Series i.MX8MM GPC improvements and BLK_CTRL driver | expand

Commit Message

Lucas Stach Sept. 10, 2021, 8:26 p.m. UTC
This adds the description for the i.MX8MM disp blk-ctrl.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

Comments

Adam Ford Sept. 12, 2021, 2:40 p.m. UTC | #1
On Fri, Sep 10, 2021 at 3:26 PM Lucas Stach <l.stach@pengutronix.de> wrote:
>

> This adds the description for the i.MX8MM disp blk-ctrl.

>

> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

> Reviewed-by: Peng Fan <peng.fan@nxp.com>

> ---

>  drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++

>  1 file changed, 70 insertions(+)

>

> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c

> index f2d74669d683..225c15f35dad 100644

> --- a/drivers/soc/imx/imx8m-blk-ctrl.c

> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c

> @@ -431,11 +431,81 @@ static const struct imx8m_blk_ctrl_data imx8m_vpu_blk_ctl_dev_data = {

>         .num_domains = ARRAY_SIZE(imx8m_vpu_blk_ctl_domain_data),

>  };

>

> +static int imx8mm_disp_power_notifier(struct notifier_block *nb,

> +                                     unsigned long action, void *data)

> +{

> +       struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,

> +                                                power_nb);

> +

> +       if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)

> +               return NOTIFY_OK;

> +

> +       /* Enable bus clock and deassert bus reset */

> +       regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(12));

> +       regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(6));

> +

> +       /*

> +        * On power up we have no software backchannel to the GPC to

> +        * wait for the ADB handshake to happen, so we just delay for a

> +        * bit. On power down the GPC driver waits for the handshake.

> +        */

> +       if (action == GENPD_NOTIFY_ON)

> +               udelay(5);

> +

> +

> +       return NOTIFY_OK;

> +}

> +

> +static const struct imx8m_blk_ctrl_domain_data imx8m_disp_blk_ctl_domain_data[] = {


Since the 8MQ, 8MM, 8MN, and 8MP have different blk_ctl structures,
shouldn't this be imx8mm_disp_blk_ctl_domain_data?

> +       [IMX8MM_DISPBLK_PD_CSI_BRIDGE] = {

> +               .name = "dispblk-csi-bridge",

> +               .clk_names = (const char *[]){ "csi-bridge-axi", "csi-bridge-apb",

> +                                              "csi-bridge-core", },

> +               .num_clks = 3,

> +               .gpc_name = "csi-bridge",

> +               .rst_mask = BIT(0) | BIT(1) | BIT(2),

> +               .clk_mask = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),

> +       },

> +       [IMX8MM_DISPBLK_PD_LCDIF] = {

> +               .name = "dispblk-lcdif",

> +               .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },

> +               .num_clks = 3,

> +               .gpc_name = "lcdif",

> +               .clk_mask = BIT(6) | BIT(7),

> +       },

> +       [IMX8MM_DISPBLK_PD_MIPI_DSI] = {

> +               .name = "dispblk-mipi-dsi",

> +               .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },

> +               .num_clks = 2,

> +               .gpc_name = "mipi-dsi",

> +               .rst_mask = BIT(5),

> +               .clk_mask = BIT(8) | BIT(9),

> +       },

> +       [IMX8MM_DISPBLK_PD_MIPI_CSI] = {

> +               .name = "dispblk-mipi-csi",

> +               .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },

> +               .num_clks = 2,

> +               .gpc_name = "mipi-csi",

> +               .rst_mask = BIT(3) | BIT(4),

> +               .clk_mask = BIT(10) | BIT(11),

> +       },

> +};

> +

> +static const struct imx8m_blk_ctrl_data imx8m_disp_blk_ctl_dev_data = {


Same here.

> +       .max_reg = 0x2c,

> +       .power_notifier_fn = imx8mm_disp_power_notifier,

> +       .domains = imx8m_disp_blk_ctl_domain_data,

> +       .num_domains = ARRAY_SIZE(imx8m_disp_blk_ctl_domain_data),

> +};

> +

>  static const struct of_device_id imx8m_blk_ctrl_of_match[] = {

>         {

>                 .compatible = "fsl,imx8mm-vpu-blk-ctrl",

>                 .data = &imx8m_vpu_blk_ctl_dev_data

>         }, {

> +               .compatible = "fsl,imx8mm-disp-blk-ctrl",

> +               .data = &imx8m_disp_blk_ctl_dev_data

> +       } ,{

>                 /* Sentinel */

>         }

>  };

> --

> 2.30.2

>
diff mbox series

Patch

diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index f2d74669d683..225c15f35dad 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -431,11 +431,81 @@  static const struct imx8m_blk_ctrl_data imx8m_vpu_blk_ctl_dev_data = {
 	.num_domains = ARRAY_SIZE(imx8m_vpu_blk_ctl_domain_data),
 };
 
+static int imx8mm_disp_power_notifier(struct notifier_block *nb,
+				      unsigned long action, void *data)
+{
+	struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+						 power_nb);
+
+	if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+		return NOTIFY_OK;
+
+	/* Enable bus clock and deassert bus reset */
+	regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(12));
+	regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(6));
+
+	/*
+	 * On power up we have no software backchannel to the GPC to
+	 * wait for the ADB handshake to happen, so we just delay for a
+	 * bit. On power down the GPC driver waits for the handshake.
+	 */
+	if (action == GENPD_NOTIFY_ON)
+		udelay(5);
+
+
+	return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8m_disp_blk_ctl_domain_data[] = {
+	[IMX8MM_DISPBLK_PD_CSI_BRIDGE] = {
+		.name = "dispblk-csi-bridge",
+		.clk_names = (const char *[]){ "csi-bridge-axi", "csi-bridge-apb",
+					       "csi-bridge-core", },
+		.num_clks = 3,
+		.gpc_name = "csi-bridge",
+		.rst_mask = BIT(0) | BIT(1) | BIT(2),
+		.clk_mask = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
+	},
+	[IMX8MM_DISPBLK_PD_LCDIF] = {
+		.name = "dispblk-lcdif",
+		.clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+		.num_clks = 3,
+		.gpc_name = "lcdif",
+		.clk_mask = BIT(6) | BIT(7),
+	},
+	[IMX8MM_DISPBLK_PD_MIPI_DSI] = {
+		.name = "dispblk-mipi-dsi",
+		.clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+		.num_clks = 2,
+		.gpc_name = "mipi-dsi",
+		.rst_mask = BIT(5),
+		.clk_mask = BIT(8) | BIT(9),
+	},
+	[IMX8MM_DISPBLK_PD_MIPI_CSI] = {
+		.name = "dispblk-mipi-csi",
+		.clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+		.num_clks = 2,
+		.gpc_name = "mipi-csi",
+		.rst_mask = BIT(3) | BIT(4),
+		.clk_mask = BIT(10) | BIT(11),
+	},
+};
+
+static const struct imx8m_blk_ctrl_data imx8m_disp_blk_ctl_dev_data = {
+	.max_reg = 0x2c,
+	.power_notifier_fn = imx8mm_disp_power_notifier,
+	.domains = imx8m_disp_blk_ctl_domain_data,
+	.num_domains = ARRAY_SIZE(imx8m_disp_blk_ctl_domain_data),
+};
+
 static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
 	{
 		.compatible = "fsl,imx8mm-vpu-blk-ctrl",
 		.data = &imx8m_vpu_blk_ctl_dev_data
 	}, {
+		.compatible = "fsl,imx8mm-disp-blk-ctrl",
+		.data = &imx8m_disp_blk_ctl_dev_data
+	} ,{
 		/* Sentinel */
 	}
 };