| Message ID | 07bd7e04dda9e84cde0664980f0b1a6d69e03109.1631174218.git.geert+renesas@glider.be |
|---|---|
| State | Accepted |
| Commit | 722d55f3a9bd810f3a1a31916cc74e2915a994ce |
| Headers | show |
| Series | renesas: Add compatible properties to Ethernet PHY nodes | expand |
On Thu, Sep 9, 2021 at 10:49 AM Geert Uytterhoeven <geert+renesas@glider.be> wrote: > Add compatible values to Ethernet PHY subnodes representing Micrel > KSZ9031 PHYs on R-Car Gen3 boards. This allows software to identify the > PHY model at any time, regardless of the state of the PHY reset line. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > I could not verify the PHY revision number (least significant nibble of > the ID) on eagle, v3msk, conder, and v3hsk, due to lack of hardware. In the meantime, I managed to verify the PHY revision number on Eagle. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index ff799ab73f8a479d..5f5a0bb2da86cc57 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -243,6 +243,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio5>; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 54f88bb7e5920296..0fdfc67cb965afd9 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -302,6 +302,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index d24da54f312b9085..c7451973f8a5b2a7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -92,6 +92,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 2426e533128ceb42..2f77ec4ed7e16166 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -107,6 +107,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index edf7f2a2f958787c..4cb5bfa6932d5809 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -132,6 +132,8 @@ &gether { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 7838dcee31362705..ca69d1b1d67af047 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -113,6 +113,8 @@ &gether { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index dc671ff57ec7678a..e46dc9aa0a43a60f 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -27,6 +27,8 @@ &avb0 { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index de959f28ad6ce27b..04ba101a711119a4 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -346,6 +346,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1f177af3eb9dfa37..7edffe7f8cfa326f 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -154,6 +154,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>;
Add compatible values to Ethernet PHY subnodes representing Micrel KSZ9031 PHYs on R-Car Gen3 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- I could not verify the PHY revision number (least significant nibble of the ID) on eagle, v3msk, conder, and v3hsk, due to lack of hardware. --- arch/arm64/boot/dts/renesas/draak.dtsi | 2 ++ arch/arm64/boot/dts/renesas/ebisu.dtsi | 2 ++ arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 2 ++ arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts | 2 ++ arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++ arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 ++ 9 files changed, 18 insertions(+)