diff mbox series

[v2,1/3] Bluetooth: btandroid: Support Android Bluetooth Quality Report

Message ID 20210908191915.v2.1.I17f57656757b83a1c0fb4b78525d8aca581725db@changeid
State Superseded
Headers show
Series [v2,1/3] Bluetooth: btandroid: Support Android Bluetooth Quality Report | expand

Commit Message

Joseph Hwang Sept. 8, 2021, 11:19 a.m. UTC
Add the btandroid.c file to support Android BQR commands.

This module may be referenced by btusb, btrtl, and hci_qca when a
Bluetooth controller supports the Android Bluetooth Quality Report.

Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
---

Changes in v2:
- Fix the titles of patches 2/3 and 3/3 and reduce their lengths.

 drivers/bluetooth/Makefile    |   1 +
 drivers/bluetooth/btandroid.c | 106 ++++++++++++++++++++++++++++++++++
 drivers/bluetooth/btandroid.h |  10 ++++
 3 files changed, 117 insertions(+)
 create mode 100644 drivers/bluetooth/btandroid.c
 create mode 100644 drivers/bluetooth/btandroid.h
diff mbox series

Patch

diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 16286ea2655d..4d5d010bb947 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -13,6 +13,7 @@  obj-$(CONFIG_BT_HCIBT3C)	+= bt3c_cs.o
 obj-$(CONFIG_BT_HCIBLUECARD)	+= bluecard_cs.o
 
 obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
+obj-$(CONFIG_BT_HCIBTUSB)	+= btandroid.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
 
 obj-$(CONFIG_BT_INTEL)		+= btintel.o
diff --git a/drivers/bluetooth/btandroid.c b/drivers/bluetooth/btandroid.c
new file mode 100644
index 000000000000..fffacc8d67cc
--- /dev/null
+++ b/drivers/bluetooth/btandroid.c
@@ -0,0 +1,106 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Support for Android Bluetooth Quality Report (BQR) specifications
+ *      https://source.android.com/devices/bluetooth/hci_requirements
+ *
+ *  Copyright (C) 2021 Google Corporation
+ */
+
+#include <linux/module.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci.h>
+
+#include "btandroid.h"
+
+#define VERSION "0.1"
+
+/*
+ * Reference for the command op codes and parameters below:
+ *   https://source.android.com/devices/bluetooth/hci_requirements#bluetooth-quality-report-command
+ */
+#define BQR_COMMAND_OCF			0x015e
+#define BQR_OPCODE			hci_opcode_pack(0x3f, BQR_COMMAND_OCF)
+
+/* report action */
+#define REPORT_ACTION_ADD		0x00
+#define REPORT_ACTION_DELETE		0x01
+#define REPORT_ACTION_CLEAR		0x02
+
+/* BQR event masks */
+#define QUALITY_MONITORING		(1 << 0)
+#define APPRAOCHING_LSTO		(1 << 1)
+#define A2DP_AUDIO_CHOPPY		(1 << 2)
+#define SCO_VOICE_CHOPPY		(1 << 3)
+
+#define DEFAULT_BQR_EVENT_MASK	(QUALITY_MONITORING | APPRAOCHING_LSTO | \
+				 A2DP_AUDIO_CHOPPY | SCO_VOICE_CHOPPY)
+
+/*
+ * Reporting at seconds so as not to stress the controller too much.
+ * Range: 0 ~ 65535 ms
+ */
+#define DEFALUT_REPORT_INTERVAL_MS	5000
+
+struct android_bqr_cp {
+	__u8	report_action;
+	__u32	event_mask;
+	__u16	min_report_interval;
+} __packed;
+
+static int enable_quality_report(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct android_bqr_cp cp;
+
+	cp.report_action = REPORT_ACTION_ADD;
+	cp.event_mask = DEFAULT_BQR_EVENT_MASK;
+	cp.min_report_interval = DEFALUT_REPORT_INTERVAL_MS;
+
+	skb = __hci_cmd_sync(hdev, BQR_OPCODE, sizeof(cp), &cp,
+							HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Enabling Android BQR failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int disable_quality_report(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct android_bqr_cp cp = { 0 };
+
+	cp.report_action = REPORT_ACTION_CLEAR;
+
+	skb = __hci_cmd_sync(hdev, BQR_OPCODE, sizeof(cp), &cp,
+							HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Disabling Android BQR failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+
+int btandroid_set_quality_report(struct hci_dev *hdev, bool enable)
+{
+	bt_dev_info(hdev, "quality report enable %d", enable);
+
+	/* Enable or disable the quality report feature. */
+	if (enable)
+		return enable_quality_report(hdev);
+	else
+		return disable_quality_report(hdev);
+}
+EXPORT_SYMBOL_GPL(btandroid_set_quality_report);
+
+MODULE_AUTHOR("Google");
+MODULE_DESCRIPTION("Support for Android Bluetooth Specification " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btandroid.h b/drivers/bluetooth/btandroid.h
new file mode 100644
index 000000000000..6abc9e8e0838
--- /dev/null
+++ b/drivers/bluetooth/btandroid.h
@@ -0,0 +1,10 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Bluetooth support for Android specifications
+ *
+ *  Copyright (C) 2021 Google Corporation
+ */
+
+#include <net/bluetooth/hci_core.h>
+
+int btandroid_set_quality_report(struct hci_dev *hdev, bool enable);