diff mbox series

[v2,2/6] dt-bindings: memory-controllers: ti,gpmc: Convert to yaml

Message ID 20210902095609.16583-3-rogerq@kernel.org
State New
Headers show
Series dt-bindings: memory-controllers: ti,gpmc: Convert to yaml | expand

Commit Message

Roger Quadros Sept. 2, 2021, 9:56 a.m. UTC
Convert omap-gpmc.txt to ti,gpmc.yaml.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
 .../bindings/memory-controllers/omap-gpmc.txt | 157 --------
 .../bindings/memory-controllers/ti,gpmc.yaml  | 364 ++++++++++++++++++
 .../devicetree/bindings/mtd/gpmc-nand.txt     |   2 +-
 .../devicetree/bindings/mtd/gpmc-nor.txt      |   4 +-
 .../devicetree/bindings/mtd/gpmc-onenand.txt  |   2 +-
 .../devicetree/bindings/net/gpmc-eth.txt      |   4 +-
 6 files changed, 370 insertions(+), 163 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml

Comments

Roger Quadros Sept. 3, 2021, 9:35 a.m. UTC | #1
Hi Rob,

On 02/09/2021 22:56, Rob Herring wrote:
> On Thu, Sep 02, 2021 at 12:56:05PM +0300, Roger Quadros wrote:
>> Convert omap-gpmc.txt to ti,gpmc.yaml.
>>
>> Signed-off-by: Roger Quadros <rogerq@kernel.org>
>> ---
>>  .../bindings/memory-controllers/omap-gpmc.txt | 157 --------
>>  .../bindings/memory-controllers/ti,gpmc.yaml  | 364 ++++++++++++++++++
>>  .../devicetree/bindings/mtd/gpmc-nand.txt     |   2 +-
>>  .../devicetree/bindings/mtd/gpmc-nor.txt      |   4 +-
>>  .../devicetree/bindings/mtd/gpmc-onenand.txt  |   2 +-
>>  .../devicetree/bindings/net/gpmc-eth.txt      |   4 +-
>>  6 files changed, 370 insertions(+), 163 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
>>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> 
>> diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
>> new file mode 100644
>> index 000000000000..b7d43370a95d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
>> @@ -0,0 +1,364 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments GPMC Memory Controller device-tree bindings
>> +
>> +maintainers:
>> +  - Tony Lindgren <tony@atomide.com>
>> +  - Roger Quadros <rogerq@kernel.org>
>> +
>> +description:
>> +  The GPMC is a unified memory controller dedicated for interfacing
>> +  with external memory devices like
>> +  - Asynchronous SRAM-like memories and ASICs
>> +  - Asynchronous, synchronous, and page mode burst NOR flash
>> +  - NAND flash
>> +  - Pseudo-SRAM devices
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - enum:
>> +          - ti,omap2420-gpmc
>> +          - ti,omap2430-gpmc
>> +          - ti,omap3430-gpmc
>> +          - ti,omap4430-gpmc
>> +          - ti,am3352-gpmc
>> +
>> +  reg:
>> +    items:
>> +      - description:
>> +          Configuration registers for the controller.
> 
> Just 'maxItems: 1' is sufficient.
> 
>> +
>> +  interrupts: true
> 
> Need to define how many.
> 
>> +
>> +  clocks:
>> +    maxItems: 1
>> +    description: |
>> +      Functional clock. Used for bus timing calculations and
>> +      GPMC configuration.
>> +
>> +  clock-names:
>> +    items:
>> +      - const: fck
>> +
>> +  dmas:
>> +    items:
>> +      - description: DMA channel for GPMC NAND prefetch
>> +
>> +  dma-names:
>> +    items:
>> +      - const: rxtx
>> +
>> +  "#address-cells":
>> +    const: 2
>> +
>> +  "#size-cells":
>> +    const: 1
>> +
>> +  gpmc,num-cs:
>> +    description: maximum number of supported chip-select lines.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +
>> +  gpmc,num-waitpins:
>> +    description: maximum number of supported wait pins.
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +
>> +  ranges:
>> +    minItems: 1
>> +    description: |
>> +      Must be set up to reflect the memory layout with four
>> +      integer values for each chip-select line in use,
>> +      <cs-number> 0 <physical address of mapping> <size>
>> +
>> +    items:
>> +      - description: NAND bank 0
>> +      - description: NOR/SRAM bank 0
>> +      - description: NOR/SRAM bank 1
>> +
>> +  '#interrupt-cells':
>> +    const: 2
>> +
>> +  interrupt-controller:
>> +    description: |
>> +      The GPMC driver implements and interrupt controller for
>> +      the NAND events "fifoevent" and "termcount" plus the
>> +      rising/falling edges on the GPMC_WAIT pins.
>> +      The interrupt number mapping is as follows
>> +      0 - NAND_fifoevent
>> +      1 - NAND_termcount
>> +      2 - GPMC_WAIT0 pin edge
>> +      3 - GPMC_WAIT1 pin edge, and so on.
>> +
>> +  '#gpio-cells':
>> +     const: 2
>> +
>> +  gpio-controller:
>> +    description: |
>> +      The GPMC driver implements a GPIO controller for the
>> +      GPMC WAIT pins that can be used as general purpose inputs.
>> +      0 maps to GPMC_WAIT0 pin.
>> +
>> +  ti,hwmods:
>> +    description:
>> +      Name of the HWMOD associated with GPMC. This is for legacy
>> +      omap2/3 platforms only.
>> +    $ref: /schemas/types.yaml#/definitions/string
>> +    deprecated: true
>> +
>> +  ti,no-idle-on-init:
>> +    description:
>> +      Prevent idling the module at init. This is for legacy omap2/3
>> +      platforms only.
>> +    type: boolean
>> +    deprecated: true
>> +
>> +patternProperties:
>> +#  "@[0-3],[a-f0-9]+$":>> +  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$":

> 
> Why the commented regex. There's no need for a full regex as we already 
> do that elsewhere. You only need to define the unit-address format.

This should be
  "@[0-7],[a-f0-9]+$":

I added the full regex during debug but forgot to take it off.

> 
>> +    type: object
>> +    description: |
>> +      The child device node represents the device connected to the GPMC
>> +      bus. The device can be a NAND controller, SRAM device, NOR device
>> +      or an ASIC.
>> +
>> +    properties:
>> +      compatible:
>> +        description:
>> +          Compatible of attached device.
> 
> Duh. Drop.
> 
>> +
>> +      reg:
>> +        items:
>> +        - description: Register access space for the device
> 
> A device with 2 register ranges isn't allowed?

GPMC is actually a memory controller and we are describing the children here.
Each child has to have a register range.

> 
>> +
>> +# GPMC Timing properties for child nodes. All are optional and default to 0.
>> +
>> +      gpmc,sync-clk-ps:
>> +        description: Minimum clock period for synchronous mode, in picoseconds
>> +        $ref: /schemas/types.yaml#/definitions/uint32
>  
>            default: 0
> 
> And elsewhere...
> 
>> +
>> +# Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
>> +      gpmc,cs-on-ns:
>> +        description: Assertion time
>> +        $ref: /schemas/types.yaml#/definitions/uint32
> 
> Blank line between DT properties.
> 
> Don't need a type ref with a standard unit suffix.
> 
> Is there a maximum value for all these?
> 

There is a maximum value but it is not an absolute value in time unit (ns)
as it depends on the GPMC functional clock rate which is platform specific.

e.g. for gpmc,cs-on-ns
	maximum: GPMC clock period * 15

>> +      gpmc,cs-rd-off-ns:
>> +        description: Read deassertion time
>> +        $ref: /schemas/types.yaml#/definitions/uint32
>> +      gpmc,cs-wr-off-ns:
>> +        description: Write deassertion time
>> +        $ref: /schemas/types.yaml#/definitions/uint32
>> +

<snip>

>>  
>> diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
>> index 32821066a85b..5e2f610455fa 100644
>> --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
>> +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
>> @@ -9,7 +9,7 @@ the GPMC controller with an "ethernet" name.
>>  
>>  All timing relevant properties as well as generic GPMC child properties are
>>  explained in a separate documents. Please refer to
>> -Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
>> +Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
>>  
>>  For the properties relevant to the ethernet controller connected to the GPMC
>>  refer to the binding documentation of the device. For example, the documentation
>> @@ -43,7 +43,7 @@ Required properties:
>>  
>>  Optional properties:
>>  - gpmc,XXX		Additional GPMC timings and settings parameters. See
>> -			Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
>> +			Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> 
> Perhaps delete this file first in the series so you don't have to 
> update it.
> 

Yes. Thanks for review :)

cheers,
-roger
Rob Herring (Arm) Sept. 3, 2021, 8:41 p.m. UTC | #2
On Fri, Sep 3, 2021 at 4:35 AM Roger Quadros <rogerq@kernel.org> wrote:
>
> Hi Rob,
>
> On 02/09/2021 22:56, Rob Herring wrote:
> > On Thu, Sep 02, 2021 at 12:56:05PM +0300, Roger Quadros wrote:
> >> Convert omap-gpmc.txt to ti,gpmc.yaml.
> >>
> >> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> >> ---
> >>  .../bindings/memory-controllers/omap-gpmc.txt | 157 --------
> >>  .../bindings/memory-controllers/ti,gpmc.yaml  | 364 ++++++++++++++++++
> >>  .../devicetree/bindings/mtd/gpmc-nand.txt     |   2 +-
> >>  .../devicetree/bindings/mtd/gpmc-nor.txt      |   4 +-
> >>  .../devicetree/bindings/mtd/gpmc-onenand.txt  |   2 +-
> >>  .../devicetree/bindings/net/gpmc-eth.txt      |   4 +-
> >>  6 files changed, 370 insertions(+), 163 deletions(-)
> >>  delete mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> >>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> >
> >> diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> >> new file mode 100644
> >> index 000000000000..b7d43370a95d
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
> >> @@ -0,0 +1,364 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Texas Instruments GPMC Memory Controller device-tree bindings
> >> +
> >> +maintainers:
> >> +  - Tony Lindgren <tony@atomide.com>
> >> +  - Roger Quadros <rogerq@kernel.org>
> >> +
> >> +description:
> >> +  The GPMC is a unified memory controller dedicated for interfacing
> >> +  with external memory devices like
> >> +  - Asynchronous SRAM-like memories and ASICs
> >> +  - Asynchronous, synchronous, and page mode burst NOR flash
> >> +  - NAND flash
> >> +  - Pseudo-SRAM devices
> >> +
> >> +properties:
> >> +  compatible:
> >> +    items:
> >> +      - enum:
> >> +          - ti,omap2420-gpmc
> >> +          - ti,omap2430-gpmc
> >> +          - ti,omap3430-gpmc
> >> +          - ti,omap4430-gpmc
> >> +          - ti,am3352-gpmc
> >> +
> >> +  reg:
> >> +    items:
> >> +      - description:
> >> +          Configuration registers for the controller.
> >
> > Just 'maxItems: 1' is sufficient.
> >
> >> +
> >> +  interrupts: true
> >
> > Need to define how many.
> >
> >> +
> >> +  clocks:
> >> +    maxItems: 1
> >> +    description: |
> >> +      Functional clock. Used for bus timing calculations and
> >> +      GPMC configuration.
> >> +
> >> +  clock-names:
> >> +    items:
> >> +      - const: fck
> >> +
> >> +  dmas:
> >> +    items:
> >> +      - description: DMA channel for GPMC NAND prefetch
> >> +
> >> +  dma-names:
> >> +    items:
> >> +      - const: rxtx
> >> +
> >> +  "#address-cells":
> >> +    const: 2
> >> +
> >> +  "#size-cells":
> >> +    const: 1
> >> +
> >> +  gpmc,num-cs:
> >> +    description: maximum number of supported chip-select lines.
> >> +    $ref: /schemas/types.yaml#/definitions/uint32
> >> +
> >> +  gpmc,num-waitpins:
> >> +    description: maximum number of supported wait pins.
> >> +    $ref: /schemas/types.yaml#/definitions/uint32
> >> +
> >> +  ranges:
> >> +    minItems: 1
> >> +    description: |
> >> +      Must be set up to reflect the memory layout with four
> >> +      integer values for each chip-select line in use,
> >> +      <cs-number> 0 <physical address of mapping> <size>
> >> +
> >> +    items:
> >> +      - description: NAND bank 0
> >> +      - description: NOR/SRAM bank 0
> >> +      - description: NOR/SRAM bank 1
> >> +
> >> +  '#interrupt-cells':
> >> +    const: 2
> >> +
> >> +  interrupt-controller:
> >> +    description: |
> >> +      The GPMC driver implements and interrupt controller for
> >> +      the NAND events "fifoevent" and "termcount" plus the
> >> +      rising/falling edges on the GPMC_WAIT pins.
> >> +      The interrupt number mapping is as follows
> >> +      0 - NAND_fifoevent
> >> +      1 - NAND_termcount
> >> +      2 - GPMC_WAIT0 pin edge
> >> +      3 - GPMC_WAIT1 pin edge, and so on.
> >> +
> >> +  '#gpio-cells':
> >> +     const: 2
> >> +
> >> +  gpio-controller:
> >> +    description: |
> >> +      The GPMC driver implements a GPIO controller for the
> >> +      GPMC WAIT pins that can be used as general purpose inputs.
> >> +      0 maps to GPMC_WAIT0 pin.
> >> +
> >> +  ti,hwmods:
> >> +    description:
> >> +      Name of the HWMOD associated with GPMC. This is for legacy
> >> +      omap2/3 platforms only.
> >> +    $ref: /schemas/types.yaml#/definitions/string
> >> +    deprecated: true
> >> +
> >> +  ti,no-idle-on-init:
> >> +    description:
> >> +      Prevent idling the module at init. This is for legacy omap2/3
> >> +      platforms only.
> >> +    type: boolean
> >> +    deprecated: true
> >> +
> >> +patternProperties:
> >> +#  "@[0-3],[a-f0-9]+$":>> +  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$":
>
> >
> > Why the commented regex. There's no need for a full regex as we already
> > do that elsewhere. You only need to define the unit-address format.
>
> This should be
>   "@[0-7],[a-f0-9]+$":
>
> I added the full regex during debug but forgot to take it off.
>
> >
> >> +    type: object
> >> +    description: |
> >> +      The child device node represents the device connected to the GPMC
> >> +      bus. The device can be a NAND controller, SRAM device, NOR device
> >> +      or an ASIC.
> >> +
> >> +    properties:
> >> +      compatible:
> >> +        description:
> >> +          Compatible of attached device.
> >
> > Duh. Drop.
> >
> >> +
> >> +      reg:
> >> +        items:
> >> +        - description: Register access space for the device
> >
> > A device with 2 register ranges isn't allowed?
>
> GPMC is actually a memory controller and we are describing the children here.

Yes, I understand what it is.

> Each child has to have a register range.

What you are saying here with the schema is there is only 1 register
range allowed for the child node. You don't know how many a child
device may have. That's a property of the child device. You just need
'reg: true' here.

Rob
Roger Quadros Sept. 6, 2021, 7:10 a.m. UTC | #3
On 03/09/2021 23:41, Rob Herring wrote:
> On Fri, Sep 3, 2021 at 4:35 AM Roger Quadros <rogerq@kernel.org> wrote:
>>
>> Hi Rob,
>>
>> On 02/09/2021 22:56, Rob Herring wrote:
>>> On Thu, Sep 02, 2021 at 12:56:05PM +0300, Roger Quadros wrote:
>>>> Convert omap-gpmc.txt to ti,gpmc.yaml.
>>>>
>>>> Signed-off-by: Roger Quadros <rogerq@kernel.org>
>>>> ---
>>>>  .../bindings/memory-controllers/omap-gpmc.txt | 157 --------
>>>>  .../bindings/memory-controllers/ti,gpmc.yaml  | 364 ++++++++++++++++++
>>>>  .../devicetree/bindings/mtd/gpmc-nand.txt     |   2 +-
>>>>  .../devicetree/bindings/mtd/gpmc-nor.txt      |   4 +-
>>>>  .../devicetree/bindings/mtd/gpmc-onenand.txt  |   2 +-
>>>>  .../devicetree/bindings/net/gpmc-eth.txt      |   4 +-
>>>>  6 files changed, 370 insertions(+), 163 deletions(-)
>>>>  delete mode 100644 Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
>>>>  create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
>>>
>>>> diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
>>>> new file mode 100644
>>>> index 000000000000..b7d43370a95d
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
>>>> @@ -0,0 +1,364 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Texas Instruments GPMC Memory Controller device-tree bindings
>>>> +
>>>> +maintainers:
>>>> +  - Tony Lindgren <tony@atomide.com>
>>>> +  - Roger Quadros <rogerq@kernel.org>
>>>> +
>>>> +description:
>>>> +  The GPMC is a unified memory controller dedicated for interfacing
>>>> +  with external memory devices like
>>>> +  - Asynchronous SRAM-like memories and ASICs
>>>> +  - Asynchronous, synchronous, and page mode burst NOR flash
>>>> +  - NAND flash
>>>> +  - Pseudo-SRAM devices
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    items:
>>>> +      - enum:
>>>> +          - ti,omap2420-gpmc
>>>> +          - ti,omap2430-gpmc
>>>> +          - ti,omap3430-gpmc
>>>> +          - ti,omap4430-gpmc
>>>> +          - ti,am3352-gpmc
>>>> +
>>>> +  reg:
>>>> +    items:
>>>> +      - description:
>>>> +          Configuration registers for the controller.
>>>
>>> Just 'maxItems: 1' is sufficient.
>>>
>>>> +
>>>> +  interrupts: true
>>>
>>> Need to define how many.
>>>
>>>> +
>>>> +  clocks:
>>>> +    maxItems: 1
>>>> +    description: |
>>>> +      Functional clock. Used for bus timing calculations and
>>>> +      GPMC configuration.
>>>> +
>>>> +  clock-names:
>>>> +    items:
>>>> +      - const: fck
>>>> +
>>>> +  dmas:
>>>> +    items:
>>>> +      - description: DMA channel for GPMC NAND prefetch
>>>> +
>>>> +  dma-names:
>>>> +    items:
>>>> +      - const: rxtx
>>>> +
>>>> +  "#address-cells":
>>>> +    const: 2
>>>> +
>>>> +  "#size-cells":
>>>> +    const: 1
>>>> +
>>>> +  gpmc,num-cs:
>>>> +    description: maximum number of supported chip-select lines.
>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>> +
>>>> +  gpmc,num-waitpins:
>>>> +    description: maximum number of supported wait pins.
>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>> +
>>>> +  ranges:
>>>> +    minItems: 1
>>>> +    description: |
>>>> +      Must be set up to reflect the memory layout with four
>>>> +      integer values for each chip-select line in use,
>>>> +      <cs-number> 0 <physical address of mapping> <size>
>>>> +
>>>> +    items:
>>>> +      - description: NAND bank 0
>>>> +      - description: NOR/SRAM bank 0
>>>> +      - description: NOR/SRAM bank 1
>>>> +
>>>> +  '#interrupt-cells':
>>>> +    const: 2
>>>> +
>>>> +  interrupt-controller:
>>>> +    description: |
>>>> +      The GPMC driver implements and interrupt controller for
>>>> +      the NAND events "fifoevent" and "termcount" plus the
>>>> +      rising/falling edges on the GPMC_WAIT pins.
>>>> +      The interrupt number mapping is as follows
>>>> +      0 - NAND_fifoevent
>>>> +      1 - NAND_termcount
>>>> +      2 - GPMC_WAIT0 pin edge
>>>> +      3 - GPMC_WAIT1 pin edge, and so on.
>>>> +
>>>> +  '#gpio-cells':
>>>> +     const: 2
>>>> +
>>>> +  gpio-controller:
>>>> +    description: |
>>>> +      The GPMC driver implements a GPIO controller for the
>>>> +      GPMC WAIT pins that can be used as general purpose inputs.
>>>> +      0 maps to GPMC_WAIT0 pin.
>>>> +
>>>> +  ti,hwmods:
>>>> +    description:
>>>> +      Name of the HWMOD associated with GPMC. This is for legacy
>>>> +      omap2/3 platforms only.
>>>> +    $ref: /schemas/types.yaml#/definitions/string
>>>> +    deprecated: true
>>>> +
>>>> +  ti,no-idle-on-init:
>>>> +    description:
>>>> +      Prevent idling the module at init. This is for legacy omap2/3
>>>> +      platforms only.
>>>> +    type: boolean
>>>> +    deprecated: true
>>>> +
>>>> +patternProperties:
>>>> +#  "@[0-3],[a-f0-9]+$":>> +  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$":
>>
>>>
>>> Why the commented regex. There's no need for a full regex as we already
>>> do that elsewhere. You only need to define the unit-address format.
>>
>> This should be
>>   "@[0-7],[a-f0-9]+$":
>>
>> I added the full regex during debug but forgot to take it off.
>>
>>>
>>>> +    type: object
>>>> +    description: |
>>>> +      The child device node represents the device connected to the GPMC
>>>> +      bus. The device can be a NAND controller, SRAM device, NOR device
>>>> +      or an ASIC.
>>>> +
>>>> +    properties:
>>>> +      compatible:
>>>> +        description:
>>>> +          Compatible of attached device.
>>>
>>> Duh. Drop.
>>>
>>>> +
>>>> +      reg:
>>>> +        items:
>>>> +        - description: Register access space for the device
>>>
>>> A device with 2 register ranges isn't allowed?
>>
>> GPMC is actually a memory controller and we are describing the children here.
> 
> Yes, I understand what it is.
> 
>> Each child has to have a register range.
> 
> What you are saying here with the schema is there is only 1 register
> range allowed for the child node. You don't know how many a child
> device may have. That's a property of the child device. You just need
> 'reg: true' here.

Now I got it. You are right. Thanks for the explanation :)

cheers,
-roger
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
deleted file mode 100644
index c1359f4d48d7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+++ /dev/null
@@ -1,157 +0,0 @@ 
-Device tree bindings for OMAP general purpose memory controllers (GPMC)
-
-The actual devices are instantiated from the child nodes of a GPMC node.
-
-Required properties:
-
- - compatible:		Should be set to one of the following:
-
-			ti,omap2420-gpmc (omap2420)
-			ti,omap2430-gpmc (omap2430)
-			ti,omap3430-gpmc (omap3430 & omap3630)
-			ti,omap4430-gpmc (omap4430 & omap4460 & omap543x)
-			ti,am3352-gpmc   (am335x devices)
-
- - reg:			A resource specifier for the register space
-			(see the example below)
- - ti,hwmods:		Should be set to "ti,gpmc" until the DT transition is
-			completed.
- - #address-cells:	Must be set to 2 to allow memory address translation
- - #size-cells:		Must be set to 1 to allow CS address passing
- - gpmc,num-cs:		The maximum number of chip-select lines that controller
-			can support.
- - gpmc,num-waitpins:	The maximum number of wait pins that controller can
-			support.
- - ranges:		Must be set up to reflect the memory layout with four
-			integer values for each chip-select line in use:
-
-			   <cs-number> 0 <physical address of mapping> <size>
-
-			Currently, calculated values derived from the contents
-			of the per-CS register GPMC_CONFIG7 (as set up by the
-			bootloader) are used for the physical address decoding.
-			As this will change in the future, filling correct
-			values here is a requirement.
- - interrupt-controller: The GPMC driver implements and interrupt controller for
-			the NAND events "fifoevent" and "termcount" plus the
-			rising/falling edges on the GPMC_WAIT pins.
-			The interrupt number mapping is as follows
-			0 - NAND_fifoevent
-			1 - NAND_termcount
-			2 - GPMC_WAIT0 pin edge
-			3 - GPMC_WAIT1 pin edge, and so on.
- - interrupt-cells:	Must be set to 2
- - gpio-controller:	The GPMC driver implements a GPIO controller for the
-			GPMC WAIT pins that can be used as general purpose inputs.
-			0 maps to GPMC_WAIT0 pin.
- - gpio-cells:		Must be set to 2
-
-Required properties when using NAND prefetch dma:
- - dmas			GPMC NAND prefetch dma channel
- - dma-names		Must be set to "rxtx"
-
-Timing properties for child nodes. All are optional and default to 0.
-
- - gpmc,sync-clk-ps:	Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
- - gpmc,cs-on-ns:	Assertion time
- - gpmc,cs-rd-off-ns:	Read deassertion time
- - gpmc,cs-wr-off-ns:	Write deassertion time
-
- ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
- - gpmc,adv-on-ns:	Assertion time
- - gpmc,adv-rd-off-ns:	Read deassertion time
- - gpmc,adv-wr-off-ns:	Write deassertion time
- - gpmc,adv-aad-mux-on-ns:	Assertion time for AAD
- - gpmc,adv-aad-mux-rd-off-ns:	Read deassertion time for AAD
- - gpmc,adv-aad-mux-wr-off-ns:	Write deassertion time for AAD
-
- WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
- - gpmc,we-on-ns	Assertion time
- - gpmc,we-off-ns:	Deassertion time
-
- OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
- - gpmc,oe-on-ns:	Assertion time
- - gpmc,oe-off-ns:	Deassertion time
- - gpmc,oe-aad-mux-on-ns:	Assertion time for AAD
- - gpmc,oe-aad-mux-off-ns:	Deassertion time for AAD
-
- Access time and cycle time timings (in nanoseconds) corresponding to
- GPMC_CONFIG5:
- - gpmc,page-burst-access-ns: 	Multiple access word delay
- - gpmc,access-ns:		Start-cycle to first data valid delay
- - gpmc,rd-cycle-ns:		Total read cycle time
- - gpmc,wr-cycle-ns:		Total write cycle time
- - gpmc,bus-turnaround-ns:	Turn-around time between successive accesses
- - gpmc,cycle2cycle-delay-ns:	Delay between chip-select pulses
- - gpmc,clk-activation-ns: 	GPMC clock activation time
- - gpmc,wait-monitoring-ns:	Start of wait monitoring with regard to valid
-				data
-
-Boolean timing parameters. If property is present parameter enabled and
-disabled if omitted:
- - gpmc,adv-extra-delay:	ADV signal is delayed by half GPMC clock
- - gpmc,cs-extra-delay:		CS signal is delayed by half GPMC clock
- - gpmc,cycle2cycle-diffcsen:	Add "cycle2cycle-delay" between successive
-				accesses to a different CS
- - gpmc,cycle2cycle-samecsen:	Add "cycle2cycle-delay" between successive
-				accesses to the same CS
- - gpmc,oe-extra-delay:		OE signal is delayed by half GPMC clock
- - gpmc,we-extra-delay:		WE signal is delayed by half GPMC clock
- - gpmc,time-para-granularity:	Multiply all access times by 2
-
-The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access-ns:		In synchronous write mode, for single or
-				burst accesses, defines the number of
-				GPMC_FCLK cycles from start access time
-				to the GPMC_CLK rising edge used by the
-				memory device for the first data capture.
- - gpmc,wr-data-mux-bus-ns:	In address-data multiplex mode, specifies
-				the time when the first data is driven on
-				the address-data bus.
-
-GPMC chip-select settings properties for child nodes. All are optional.
-
-- gpmc,burst-length	Page/burst length. Must be 4, 8 or 16.
-- gpmc,burst-wrap	Enables wrap bursting
-- gpmc,burst-read	Enables read page/burst mode
-- gpmc,burst-write	Enables write page/burst mode
-- gpmc,device-width	Total width of device(s) connected to a GPMC
-			chip-select in bytes. The GPMC supports 8-bit
-			and 16-bit devices and so this property must be
-			1 or 2.
-- gpmc,mux-add-data	Address and data multiplexing configuration.
-			Valid values are 1 for address-address-data
-			multiplexing mode and 2 for address-data
-			multiplexing mode.
-- gpmc,sync-read	Enables synchronous read. Defaults to asynchronous
-			is this is not set.
-- gpmc,sync-write	Enables synchronous writes. Defaults to asynchronous
-			is this is not set.
-- gpmc,wait-pin		Wait-pin used by client. Must be less than
-			"gpmc,num-waitpins".
-- gpmc,wait-on-read	Enables wait monitoring on reads.
-- gpmc,wait-on-write	Enables wait monitoring on writes.
-
-Example for an AM33xx board:
-
-	gpmc: gpmc@50000000 {
-		compatible = "ti,am3352-gpmc";
-		ti,hwmods = "gpmc";
-		reg = <0x50000000 0x2000>;
-		interrupts = <100>;
-		dmas = <&edma 52 0>;
-		dma-names = "rxtx";
-		gpmc,num-cs = <8>;
-		gpmc,num-waitpins = <2>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		/* child nodes go here */
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
new file mode 100644
index 000000000000..b7d43370a95d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -0,0 +1,364 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC Memory Controller device-tree bindings
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  The GPMC is a unified memory controller dedicated for interfacing
+  with external memory devices like
+  - Asynchronous SRAM-like memories and ASICs
+  - Asynchronous, synchronous, and page mode burst NOR flash
+  - NAND flash
+  - Pseudo-SRAM devices
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,omap2420-gpmc
+          - ti,omap2430-gpmc
+          - ti,omap3430-gpmc
+          - ti,omap4430-gpmc
+          - ti,am3352-gpmc
+
+  reg:
+    items:
+      - description:
+          Configuration registers for the controller.
+
+  interrupts: true
+
+  clocks:
+    maxItems: 1
+    description: |
+      Functional clock. Used for bus timing calculations and
+      GPMC configuration.
+
+  clock-names:
+    items:
+      - const: fck
+
+  dmas:
+    items:
+      - description: DMA channel for GPMC NAND prefetch
+
+  dma-names:
+    items:
+      - const: rxtx
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  gpmc,num-cs:
+    description: maximum number of supported chip-select lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  gpmc,num-waitpins:
+    description: maximum number of supported wait pins.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ranges:
+    minItems: 1
+    description: |
+      Must be set up to reflect the memory layout with four
+      integer values for each chip-select line in use,
+      <cs-number> 0 <physical address of mapping> <size>
+
+    items:
+      - description: NAND bank 0
+      - description: NOR/SRAM bank 0
+      - description: NOR/SRAM bank 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller:
+    description: |
+      The GPMC driver implements and interrupt controller for
+      the NAND events "fifoevent" and "termcount" plus the
+      rising/falling edges on the GPMC_WAIT pins.
+      The interrupt number mapping is as follows
+      0 - NAND_fifoevent
+      1 - NAND_termcount
+      2 - GPMC_WAIT0 pin edge
+      3 - GPMC_WAIT1 pin edge, and so on.
+
+  '#gpio-cells':
+     const: 2
+
+  gpio-controller:
+    description: |
+      The GPMC driver implements a GPIO controller for the
+      GPMC WAIT pins that can be used as general purpose inputs.
+      0 maps to GPMC_WAIT0 pin.
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with GPMC. This is for legacy
+      omap2/3 platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+  ti,no-idle-on-init:
+    description:
+      Prevent idling the module at init. This is for legacy omap2/3
+      platforms only.
+    type: boolean
+    deprecated: true
+
+patternProperties:
+#  "@[0-3],[a-f0-9]+$":
+  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$":
+    type: object
+    description: |
+      The child device node represents the device connected to the GPMC
+      bus. The device can be a NAND controller, SRAM device, NOR device
+      or an ASIC.
+
+    properties:
+      compatible:
+        description:
+          Compatible of attached device.
+
+      reg:
+        items:
+        - description: Register access space for the device
+
+# GPMC Timing properties for child nodes. All are optional and default to 0.
+
+      gpmc,sync-clk-ps:
+        description: Minimum clock period for synchronous mode, in picoseconds
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+# Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
+      gpmc,cs-on-ns:
+        description: Assertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,cs-rd-off-ns:
+        description: Read deassertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,cs-wr-off-ns:
+        description: Write deassertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+# ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
+      gpmc,adv-on-ns:
+        description: Assertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,adv-rd-off-ns:
+        description: Read deassertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,adv-wr-off-ns:
+        description: Write deassertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,adv-aad-mux-on-ns:
+        description: Assertion time for AAD
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,adv-aad-mux-rd-off-ns:
+        description: Read deassertion time for AAD
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,adv-aad-mux-wr-off-ns:
+        description: Write deassertion time for AAD
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+# WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+      gpmc,we-on-ns:
+        description: Assertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,we-off-ns:
+        description: Deassertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+# OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+      gpmc,oe-on-ns:
+        description: Assertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,oe-off-ns:
+        description: Deassertion time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,oe-aad-mux-on-ns:
+        description:       Assertion time for AAD
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,oe-aad-mux-off-ns:
+        description:      Deassertion time for AAD
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+# Access time and cycle time timings (in nanoseconds) corresponding to
+# GPMC_CONFIG5:
+      gpmc,page-burst-access-ns:
+        description:   Multiple access word delay
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,access-ns:
+        description:              Start-cycle to first data valid delay
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,rd-cycle-ns:
+        description:            Total read cycle time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,wr-cycle-ns:
+        description:            Total write cycle time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,bus-turnaround-ns:
+        description:      Turn-around time between successive accesses
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,cycle2cycle-delay-ns:
+        description:   Delay between chip-select pulses
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,clk-activation-ns:
+        description:      GPMC clock activation time
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,wait-monitoring-ns:
+        description:     Start of wait monitoring with regard to valid data
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+# Boolean timing parameters. If property is present, parameter is enabled
+# otherwise disabled.
+      gpmc,adv-extra-delay:
+        description:        ADV signal is delayed by half GPMC clock
+        type: boolean
+      gpmc,cs-extra-delay:
+        description:         CS signal is delayed by half GPMC clock
+        type: boolean
+      gpmc,cycle2cycle-diffcsen:
+        description: |
+          Add "cycle2cycle-delay" between successive accesses
+          to a different CS
+        type: boolean
+      gpmc,cycle2cycle-samecsen:
+        description: |
+          Add "cycle2cycle-delay" between successive accesses
+          to the same CS
+        type: boolean
+      gpmc,oe-extra-delay:
+        description:         OE signal is delayed by half GPMC clock
+        type: boolean
+      gpmc,we-extra-delay:
+        description:         WE signal is delayed by half GPMC clock
+        type: boolean
+      gpmc,time-para-granularity:
+        description:  Multiply all access times by 2
+        type: boolean
+
+# The following two properties are applicable only to OMAP3+ and AM335x:
+      gpmc,wr-access-ns:
+        description: |
+          In synchronous write mode, for single or
+          burst accesses, defines the number of
+          GPMC_FCLK cycles from start access time
+          to the GPMC_CLK rising edge used by the
+          memory device for the first data capture.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,wr-data-mux-bus-ns:
+        description: |
+          In address-data multiplex mode, specifies
+          the time when the first data is driven on
+          the address-data bus.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+# GPMC chip-select settings properties for child nodes. All are optional.
+
+      gpmc,burst-length:
+        description:     Page/burst length. Must be 4, 8 or 16.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [4, 8, 16]
+      gpmc,burst-wrap:
+        description:       Enables wrap bursting
+        type: boolean
+      gpmc,burst-read:
+        description:       Enables read page/burst mode
+        type: boolean
+      gpmc,burst-write:
+        description:      Enables write page/burst mode
+        type: boolean
+      gpmc,device-width:
+        description: |
+          Total width of device(s) connected to a GPMC
+          chip-select in bytes. The GPMC supports 8-bit
+          and 16-bit devices and so this property must be
+          1 or 2.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2]
+      gpmc,mux-add-data:
+        description: |
+          Address and data multiplexing configuration.
+          Valid values are:
+          0 for Non multiplexed mode
+          1 for address-address-data multiplexing mode and
+          2 for address-data multiplexing mode.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+      gpmc,sync-read:
+        description: |
+          Enables synchronous read. Defaults to asynchronous
+          is this is not set.
+        type: boolean
+      gpmc,sync-write:
+        description: |
+          Enables synchronous writes. Defaults to asynchronous
+          is this is not set.
+        type: boolean
+      gpmc,wait-pin:
+        description: |
+          Wait-pin used by client. Must be less than "gpmc,num-waitpins".
+        $ref: /schemas/types.yaml#/definitions/uint32
+      gpmc,wait-on-read:
+        description:     Enables wait monitoring on reads.
+        type: boolean
+      gpmc,wait-on-write:
+        description:    Enables wait monitoring on writes.
+        type: boolean
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - gpmc,num-cs
+  - gpmc,num-waitpins
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      reg = <0x50000000 0x2000>;
+      interrupts = <100>;
+      clocks = <&l3s_clkctrl>;
+      clock-names = "fck";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      gpmc,num-cs = <8>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 44919d48d241..e439949d49e6 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -5,7 +5,7 @@  the GPMC controller with a name of "nand".
 
 All timing relevant properties as well as generic gpmc child properties are
 explained in a separate documents - please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
 
 For NAND specific properties such as ECC modes or bus width, please refer to
 Documentation/devicetree/bindings/mtd/nand-controller.yaml
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
index c8567b40fe13..c9bea106ea65 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
@@ -5,7 +5,7 @@  child nodes of the GPMC controller with a name of "nor".
 
 All timing relevant properties as well as generic GPMC child properties are
 explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
 
 Required properties:
 - bank-width: 		Width of NOR flash in bytes. GPMC supports 8-bit and
@@ -28,7 +28,7 @@  Required properties:
 
 Optional properties:
 - gpmc,XXX		Additional GPMC timings and settings parameters. See
-			Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+			Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
 
 Optional properties for partition table parsing:
 - #address-cells: should be set to 1
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
index e9f01a963a0a..0da78cc4ccca 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -5,7 +5,7 @@  the GPMC controller with a name of "onenand".
 
 All timing relevant properties as well as generic gpmc child properties are
 explained in a separate documents - please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
index 32821066a85b..5e2f610455fa 100644
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -9,7 +9,7 @@  the GPMC controller with an "ethernet" name.
 
 All timing relevant properties as well as generic GPMC child properties are
 explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
 
 For the properties relevant to the ethernet controller connected to the GPMC
 refer to the binding documentation of the device. For example, the documentation
@@ -43,7 +43,7 @@  Required properties:
 
 Optional properties:
 - gpmc,XXX		Additional GPMC timings and settings parameters. See
-			Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+			Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
 
 Example: