diff mbox series

[v5,19/21] ASoC: qdsp6: audioreach: add q6apm lpass dai support

Message ID 20210903112032.25834-20-srinivas.kandagatla@linaro.org
State Superseded
Headers show
Series ASoC: qcom: Add AudioReach support | expand

Commit Message

Srinivas Kandagatla Sept. 3, 2021, 11:20 a.m. UTC
Add support to Audio port dais on LPASS Audio IP using
existing common q6dsp-lpass-ports.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 sound/soc/qcom/Kconfig                  |   4 +
 sound/soc/qcom/qdsp6/Makefile           |   1 +
 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 266 ++++++++++++++++++++++++
 3 files changed, 271 insertions(+)
 create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c

-- 
2.21.0

Comments

Pierre-Louis Bossart Sept. 3, 2021, 3:53 p.m. UTC | #1
>  config SND_SOC_QDSP6_APM

>  	select SND_SOC_QDSP6_APM_DAI

> +	select SND_SOC_QDSP6_APM_LPASS_DAI

>  	tristate


tristate then select?

>

> +static int q6apm_lpass_dai_prepare(struct snd_pcm_substream *substream,

> +			       struct snd_soc_dai *dai)

> +{

> +	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);

> +	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];

> +	int graph_id = dai->id;

> +	int rc;

> +	struct q6apm_graph *graph;

> +

> +	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {

> +		graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id);

> +		if (IS_ERR(graph)) {

> +			dev_err(dai->dev, "Failed to open graph (%d)\n",

> +				graph_id);

> +			rc = PTR_ERR(graph);

> +			return rc;

> +		}

> +		dai_data->graph[graph_id] = graph;

> +	}


so you don't open a graph on capture?

How does the rest work if dai_data->graph is not initialized?
Or is it done somewhere else and it'd be worthy of a comment?

> +

> +	cfg->direction = substream->stream;

> +	rc = q6apm_graph_media_format_pcm(dai_data->graph[dai->id], cfg);

> +

> +	if (rc) {

> +		dev_err(dai->dev, "Failed to set media format %d\n", rc);

> +		return rc;

> +	}

> +

> +	rc = q6apm_graph_prepare(dai_data->graph[dai->id]);

> +	if (rc) {

> +		dev_err(dai->dev, "Failed to prepare Graph %d\n", rc);

> +		return rc;

> +	}

> +

> +	rc = q6apm_graph_start(dai_data->graph[dai->id]);

> +	if (rc < 0) {

> +		dev_err(dai->dev, "fail to start APM port %x\n", dai->id);

> +		return rc;

> +	}

> +	dai_data->is_port_started[dai->id] = true;

> +

> +	return 0;

> +}

> +

> +static int q6apm_lpass_dai_startup(struct snd_pcm_substream *substream,

> +				struct snd_soc_dai *dai)

> +{

> +	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);

> +	int graph_id = dai->id;

> +	struct q6apm_graph *graph;

> +

> +	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {

> +		graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id);

> +		if (IS_ERR(graph)) {

> +			dev_err(dai->dev, "Failed to open graph (%d)\n",

> +				graph_id);

> +			return PTR_ERR(graph);

> +		}

> +		dai_data->graph[graph_id] = graph;

> +	}


definitively need a comment on why the behavior is different from
capture and playback?

What prevents you from doing the same operations in .startup for capture
and playback?

> +

> +	return 0;

> +}

> +
Srinivas Kandagatla Sept. 6, 2021, 4:29 p.m. UTC | #2
Thanks Pierre for taking time to review this,

On 03/09/2021 16:53, Pierre-Louis Bossart wrote:
> 

>>   config SND_SOC_QDSP6_APM

>>   	select SND_SOC_QDSP6_APM_DAI

>> +	select SND_SOC_QDSP6_APM_LPASS_DAI

>>   	tristate

> 

> tristate then select?

> 

Its fixed now.

>>

>> +static int q6apm_lpass_dai_prepare(struct snd_pcm_substream *substream,

>> +			       struct snd_soc_dai *dai)

>> +{

>> +	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);

>> +	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];

>> +	int graph_id = dai->id;

>> +	int rc;

>> +	struct q6apm_graph *graph;

>> +

>> +	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {

>> +		graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id);

>> +		if (IS_ERR(graph)) {

>> +			dev_err(dai->dev, "Failed to open graph (%d)\n",

>> +				graph_id);

>> +			rc = PTR_ERR(graph);

>> +			return rc;

>> +		}

>> +		dai_data->graph[graph_id] = graph;

>> +	}

> 

> so you don't open a graph on capture?

> 

> How does the rest work if dai_data->graph is not initialized?

> Or is it done somewhere else and it'd be worthy of a comment?


Yes, we are trying to sequence source graph and sink graph.
It is recommend that we load DSP with source graph first and then sink 
graph.

I will add a comment too.

--srini

> 

>> +

>> +	cfg->direction = substream->stream;

>> +	rc = q6apm_graph_media_format_pcm(dai_data->graph[dai->id], cfg);

>> +

>> +	if (rc) {

>> +		dev_err(dai->dev, "Failed to set media format %d\n", rc);

>> +		return rc;

>> +	}

>> +

>> +	rc = q6apm_graph_prepare(dai_data->graph[dai->id]);

>> +	if (rc) {

>> +		dev_err(dai->dev, "Failed to prepare Graph %d\n", rc);

>> +		return rc;

>> +	}

>> +

>> +	rc = q6apm_graph_start(dai_data->graph[dai->id]);

>> +	if (rc < 0) {

>> +		dev_err(dai->dev, "fail to start APM port %x\n", dai->id);

>> +		return rc;

>> +	}

>> +	dai_data->is_port_started[dai->id] = true;

>> +

>> +	return 0;

>> +}

>> +

>> +static int q6apm_lpass_dai_startup(struct snd_pcm_substream *substream,

>> +				struct snd_soc_dai *dai)

>> +{

>> +	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);

>> +	int graph_id = dai->id;

>> +	struct q6apm_graph *graph;

>> +

>> +	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {

>> +		graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id);

>> +		if (IS_ERR(graph)) {

>> +			dev_err(dai->dev, "Failed to open graph (%d)\n",

>> +				graph_id);

>> +			return PTR_ERR(graph);

>> +		}

>> +		dai_data->graph[graph_id] = graph;

>> +	}

> 

> definitively need a comment on why the behavior is different from

> capture and playback?

> 

> What prevents you from doing the same operations in .startup for capture

> and playback?

> 

>> +

>> +	return 0;

>> +}

>> +

>
diff mbox series

Patch

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index fb1921889dc4..51b5a173e8ed 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -88,8 +88,12 @@  config SND_SOC_QDSP6_APM_DAI
 	select SND_SOC_COMPRESS
 	tristate
 
+config SND_SOC_QDSP6_APM_LPASS_DAI
+	tristate
+
 config SND_SOC_QDSP6_APM
 	select SND_SOC_QDSP6_APM_DAI
+	select SND_SOC_QDSP6_APM_LPASS_DAI
 	tristate
 
 config SND_SOC_QDSP6
diff --git a/sound/soc/qcom/qdsp6/Makefile b/sound/soc/qcom/qdsp6/Makefile
index a4ec7c4d0e48..bdcbfdfa9bd0 100644
--- a/sound/soc/qcom/qdsp6/Makefile
+++ b/sound/soc/qcom/qdsp6/Makefile
@@ -14,3 +14,4 @@  obj-$(CONFIG_SND_SOC_QDSP6_ASM_DAI) += q6asm-dai.o
 
 obj-$(CONFIG_SND_SOC_QDSP6_APM) += snd-q6apm.o
 obj-$(CONFIG_SND_SOC_QDSP6_APM_DAI) += q6apm-dai.o
+obj-$(CONFIG_SND_SOC_QDSP6_APM_LPASS_DAI) += q6apm-lpass-dais.o
diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
new file mode 100644
index 000000000000..25f31d425746
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
@@ -0,0 +1,266 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021, Linaro Limited
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/pcm_params.h>
+#include "q6dsp-lpass-ports.h"
+#include "audioreach.h"
+#include "q6apm.h"
+
+#define AUDIOREACH_BE_PCM_BASE	16
+
+struct q6apm_lpass_dai_data {
+	struct q6apm_graph *graph[APM_PORT_MAX];
+	bool is_port_started[APM_PORT_MAX];
+	struct audioreach_module_config module_config[APM_PORT_MAX];
+};
+
+static int q6dma_set_channel_map(struct snd_soc_dai *dai,
+				 unsigned int tx_num, unsigned int *tx_ch_mask,
+				 unsigned int rx_num, unsigned int *rx_ch_mask)
+{
+
+	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
+	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
+	int ch_mask;
+	int rc = 0;
+
+	switch (dai->id) {
+	case WSA_CODEC_DMA_TX_0:
+	case WSA_CODEC_DMA_TX_1:
+	case WSA_CODEC_DMA_TX_2:
+	case VA_CODEC_DMA_TX_0:
+	case VA_CODEC_DMA_TX_1:
+	case VA_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+	case TX_CODEC_DMA_TX_4:
+	case TX_CODEC_DMA_TX_5:
+		if (!tx_ch_mask) {
+			dev_err(dai->dev, "tx slot not found\n");
+			return -EINVAL;
+		}
+
+		if (tx_num > PCM_MAX_NUM_CHANNEL) {
+			dev_err(dai->dev, "invalid tx num %d\n",
+				tx_num);
+			return -EINVAL;
+		}
+		ch_mask = *tx_ch_mask;
+
+		break;
+	case WSA_CODEC_DMA_RX_0:
+	case WSA_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_0:
+	case RX_CODEC_DMA_RX_1:
+	case RX_CODEC_DMA_RX_2:
+	case RX_CODEC_DMA_RX_3:
+	case RX_CODEC_DMA_RX_4:
+	case RX_CODEC_DMA_RX_5:
+	case RX_CODEC_DMA_RX_6:
+	case RX_CODEC_DMA_RX_7:
+		/* rx */
+		if (!rx_ch_mask) {
+			dev_err(dai->dev, "rx slot not found\n");
+			return -EINVAL;
+		}
+		if (rx_num > APM_PORT_MAX_AUDIO_CHAN_CNT) {
+			dev_err(dai->dev, "invalid rx num %d\n",
+				rx_num);
+			return -EINVAL;
+		}
+		ch_mask = *rx_ch_mask;
+
+		break;
+	default:
+		dev_err(dai->dev, "%s: invalid dai id 0x%x\n",
+			__func__, dai->id);
+		return -EINVAL;
+	}
+
+	cfg->active_channels_mask = ch_mask;
+
+	return rc;
+}
+
+static int q6dma_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct snd_soc_dai *dai)
+{
+	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
+	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
+
+	cfg->bit_width = params_width(params);
+	cfg->sample_rate = params_rate(params);
+	cfg->num_channels = params_channels(params);
+
+	return 0;
+}
+
+static void q6apm_lpass_dai_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
+	int rc;
+
+	if (!dai_data->is_port_started[dai->id])
+		return;
+	rc = q6apm_graph_stop(dai_data->graph[dai->id]);
+	if (rc < 0)
+		dev_err(dai->dev, "fail to close APM port (%d)\n", rc);
+
+	q6apm_graph_close(dai_data->graph[dai->id]);
+	dai_data->is_port_started[dai->id] = false;
+
+}
+
+static int q6apm_lpass_dai_prepare(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
+	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
+	int graph_id = dai->id;
+	int rc;
+	struct q6apm_graph *graph;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id);
+		if (IS_ERR(graph)) {
+			dev_err(dai->dev, "Failed to open graph (%d)\n",
+				graph_id);
+			rc = PTR_ERR(graph);
+			return rc;
+		}
+		dai_data->graph[graph_id] = graph;
+	}
+
+	cfg->direction = substream->stream;
+	rc = q6apm_graph_media_format_pcm(dai_data->graph[dai->id], cfg);
+
+	if (rc) {
+		dev_err(dai->dev, "Failed to set media format %d\n", rc);
+		return rc;
+	}
+
+	rc = q6apm_graph_prepare(dai_data->graph[dai->id]);
+	if (rc) {
+		dev_err(dai->dev, "Failed to prepare Graph %d\n", rc);
+		return rc;
+	}
+
+	rc = q6apm_graph_start(dai_data->graph[dai->id]);
+	if (rc < 0) {
+		dev_err(dai->dev, "fail to start APM port %x\n", dai->id);
+		return rc;
+	}
+	dai_data->is_port_started[dai->id] = true;
+
+	return 0;
+}
+
+static int q6apm_lpass_dai_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
+	int graph_id = dai->id;
+	struct q6apm_graph *graph;
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+		graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id);
+		if (IS_ERR(graph)) {
+			dev_err(dai->dev, "Failed to open graph (%d)\n",
+				graph_id);
+			return PTR_ERR(graph);
+		}
+		dai_data->graph[graph_id] = graph;
+	}
+
+	return 0;
+}
+
+static int q6i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
+	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
+
+	cfg->fmt = fmt;
+
+	return 0;
+}
+
+static const struct snd_soc_dai_ops q6dma_ops = {
+	.prepare	= q6apm_lpass_dai_prepare,
+	.startup	= q6apm_lpass_dai_startup,
+	.shutdown	= q6apm_lpass_dai_shutdown,
+	.set_channel_map  = q6dma_set_channel_map,
+	.hw_params        = q6dma_hw_params,
+};
+
+static const struct snd_soc_dai_ops q6i2s_ops = {
+	.prepare	= q6apm_lpass_dai_prepare,
+	.startup	= q6apm_lpass_dai_startup,
+	.shutdown	= q6apm_lpass_dai_shutdown,
+	.set_channel_map  = q6dma_set_channel_map,
+	.hw_params        = q6dma_hw_params,
+	.set_fmt	= q6i2s_set_fmt,
+};
+
+static const struct snd_soc_component_driver q6apm_lpass_dai_component = {
+	.name		= "q6apm-be-dai-component",
+	.of_xlate_dai_name = q6dsp_audio_ports_of_xlate_dai_name,
+	.be_pcm_base = AUDIOREACH_BE_PCM_BASE,
+	.use_dai_pcm_id = true,
+};
+
+static int q6apm_lpass_dai_dev_probe(struct platform_device *pdev)
+{
+	struct q6dsp_audio_port_dai_driver_config cfg;
+	struct snd_soc_dai_driver *dais;
+	struct q6apm_lpass_dai_data *dai_data;
+	struct device *dev = &pdev->dev;
+	int num_dais;
+
+
+	dai_data = devm_kzalloc(dev, sizeof(*dai_data), GFP_KERNEL);
+	if (!dai_data)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, dai_data);
+
+	memset(&cfg, 0, sizeof(cfg));
+	cfg.q6i2s_ops = &q6i2s_ops;
+	cfg.q6dma_ops = &q6dma_ops;
+	dais = q6dsp_audio_ports_set_config(dev, &cfg, &num_dais);
+
+	return devm_snd_soc_register_component(dev, &q6apm_lpass_dai_component,
+					       dais, num_dais);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id q6apm_lpass_dai_device_id[] = {
+	{ .compatible = "qcom,q6apm-lpass-dais" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, q6apm_lpass_dai_device_id);
+#endif
+
+static struct platform_driver q6apm_lpass_dai_platform_driver = {
+	.driver = {
+		.name = "q6apm-lpass-dais",
+		.of_match_table = of_match_ptr(q6apm_lpass_dai_device_id),
+	},
+	.probe = q6apm_lpass_dai_dev_probe,
+};
+module_platform_driver(q6apm_lpass_dai_platform_driver);
+
+MODULE_DESCRIPTION("AUDIOREACH APM LPASS dai driver");
+MODULE_LICENSE("GPL");