diff mbox series

[v7,3/8] clk: qcom: dispcc-sm8250: use runtime PM for the clock controller

Message ID 20210829154757.784699-4-dmitry.baryshkov@linaro.org
State Accepted
Commit 6158b94ec8070e8a75f2c9b9a78cb425b54abcf8
Headers show
Series clk: qcom: use power-domain for sm8250's clock controllers | expand

Commit Message

Dmitry Baryshkov Aug. 29, 2021, 3:47 p.m. UTC
On sm8250 dispcc and videocc registers are powered up by the MMCX power
domain. Use runtime PM calls to make sure that required power domain is
powered on while we access clock controller's registers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/dispcc-sm8250.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

Comments

Bjorn Andersson Oct. 7, 2021, 3:09 p.m. UTC | #1
On Sun 29 Aug 08:47 PDT 2021, Dmitry Baryshkov wrote:

> On sm8250 dispcc and videocc registers are powered up by the MMCX power

> domain. Use runtime PM calls to make sure that required power domain is

> powered on while we access clock controller's registers.

> 


As I said on previous iterations, the clock framework will ensure that
the power domain is powered up around all calls back into the clock
driver, so for clocks this isn't needed.

But after digging some more, the gdsc registration needs this and I
don't mind keeping it on for the duration of the registration, rather
than having the clock framework turn it on and off.

As far as I can see the reset_controller won't actually access the
hardware during registration.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>




That said, qcom_reset_{assert,deassert}() doesn't seem to be performed
under a pm_runtime_get() section, so I believe that should be addressed
as well.  I don't see that we have a problem with this in practice as of
today, but it seems worthy to correct - unless I'm just missing
something.

Regards,
Bjorn

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---

>  drivers/clk/qcom/dispcc-sm8250.c | 27 +++++++++++++++++++++++++--

>  1 file changed, 25 insertions(+), 2 deletions(-)

> 

> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c

> index 601c7c0ba483..108dd1249b6a 100644

> --- a/drivers/clk/qcom/dispcc-sm8250.c

> +++ b/drivers/clk/qcom/dispcc-sm8250.c

> @@ -6,6 +6,7 @@

>  #include <linux/clk-provider.h>

>  #include <linux/module.h>

>  #include <linux/platform_device.h>

> +#include <linux/pm_runtime.h>

>  #include <linux/regmap.h>

>  #include <linux/reset-controller.h>

>  

> @@ -1226,13 +1227,31 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {

>  };

>  MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);

>  

> +static void disp_cc_sm8250_pm_runtime_disable(void *data)

> +{

> +	pm_runtime_disable(data);

> +}

> +

>  static int disp_cc_sm8250_probe(struct platform_device *pdev)

>  {

>  	struct regmap *regmap;

> +	int ret;

> +

> +	pm_runtime_enable(&pdev->dev);

> +

> +	ret = devm_add_action_or_reset(&pdev->dev, disp_cc_sm8250_pm_runtime_disable, &pdev->dev);

> +	if (ret)

> +		return ret;

> +

> +	ret = pm_runtime_resume_and_get(&pdev->dev);

> +	if (ret)

> +		return ret;

>  

>  	regmap = qcom_cc_map(pdev, &disp_cc_sm8250_desc);

> -	if (IS_ERR(regmap))

> +	if (IS_ERR(regmap)) {

> +		pm_runtime_put(&pdev->dev);

>  		return PTR_ERR(regmap);

> +	}

>  

>  	/* note: trion == lucid, except for the prepare() op */

>  	BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);

> @@ -1257,7 +1276,11 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)

>  	/* DISP_CC_XO_CLK always-on */

>  	regmap_update_bits(regmap, 0x605c, BIT(0), BIT(0));

>  

> -	return qcom_cc_really_probe(pdev, &disp_cc_sm8250_desc, regmap);

> +	ret = qcom_cc_really_probe(pdev, &disp_cc_sm8250_desc, regmap);

> +

> +	pm_runtime_put(&pdev->dev);

> +

> +	return ret;

>  }

>  

>  static struct platform_driver disp_cc_sm8250_driver = {

> -- 

> 2.33.0

>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index 601c7c0ba483..108dd1249b6a 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -6,6 +6,7 @@ 
 #include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset-controller.h>
 
@@ -1226,13 +1227,31 @@  static const struct of_device_id disp_cc_sm8250_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
 
+static void disp_cc_sm8250_pm_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
 static int disp_cc_sm8250_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
+	int ret;
+
+	pm_runtime_enable(&pdev->dev);
+
+	ret = devm_add_action_or_reset(&pdev->dev, disp_cc_sm8250_pm_runtime_disable, &pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
 
 	regmap = qcom_cc_map(pdev, &disp_cc_sm8250_desc);
-	if (IS_ERR(regmap))
+	if (IS_ERR(regmap)) {
+		pm_runtime_put(&pdev->dev);
 		return PTR_ERR(regmap);
+	}
 
 	/* note: trion == lucid, except for the prepare() op */
 	BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
@@ -1257,7 +1276,11 @@  static int disp_cc_sm8250_probe(struct platform_device *pdev)
 	/* DISP_CC_XO_CLK always-on */
 	regmap_update_bits(regmap, 0x605c, BIT(0), BIT(0));
 
-	return qcom_cc_really_probe(pdev, &disp_cc_sm8250_desc, regmap);
+	ret = qcom_cc_really_probe(pdev, &disp_cc_sm8250_desc, regmap);
+
+	pm_runtime_put(&pdev->dev);
+
+	return ret;
 }
 
 static struct platform_driver disp_cc_sm8250_driver = {