@@ -505,6 +505,90 @@ static void tegra_pmc_scratch_writel(struct tegra_pmc *pmc, u32 value,
writel(value, pmc->scratch + offset);
}
+static const char * const tegra_pd_no_perf_compats[] = {
+ "nvidia,tegra20-sclk",
+ "nvidia,tegra30-sclk",
+ "nvidia,tegra30-pllc",
+ "nvidia,tegra30-plle",
+ "nvidia,tegra30-pllm",
+ "nvidia,tegra20-dc",
+ "nvidia,tegra30-dc",
+ "nvidia,tegra20-emc",
+ "nvidia,tegra30-emc",
+ NULL,
+};
+
+static int tegra_pmc_pd_get_performance_state(struct generic_pm_domain *genpd,
+ struct device *dev,
+ bool *dev_suspended)
+{
+ struct opp_table *hw_opp_table, *clk_opp_table;
+ struct dev_pm_opp *opp;
+ u32 hw_version;
+ int ret;
+
+ /*
+ * The EMC devices are a special case because we have a protection
+ * from non-EMC drivers getting clock handle before EMC driver is
+ * fully initialized. The goal of the protection is to prevent
+ * devfreq driver from getting failures if it will try to change
+ * EMC clock rate until clock is fully initialized. The EMC drivers
+ * will initialize the performance state by themselves.
+ *
+ * Display controller also is a special case because only controller
+ * driver could get the clock rate based on configuration of internal
+ * divider.
+ *
+ * Clock driver uses its own state syncing.
+ */
+ if (of_device_compatible_match(dev->of_node, tegra_pd_no_perf_compats))
+ return 0;
+
+ if (of_machine_is_compatible("nvidia,tegra20"))
+ hw_version = BIT(tegra_sku_info.soc_process_id);
+ else
+ hw_version = BIT(tegra_sku_info.soc_speedo_id);
+
+ hw_opp_table = dev_pm_opp_set_supported_hw(dev, &hw_version, 1);
+ if (IS_ERR(hw_opp_table)) {
+ dev_err(dev, "failed to set OPP supported HW: %pe\n",
+ hw_opp_table);
+ return PTR_ERR(hw_opp_table);
+ }
+
+ clk_opp_table = dev_pm_opp_set_clkname(dev, NULL);
+ if (IS_ERR(clk_opp_table)) {
+ dev_err(dev, "failed to set OPP clk: %pe\n", clk_opp_table);
+ ret = PTR_ERR(clk_opp_table);
+ goto put_hw;
+ }
+
+ ret = devm_pm_opp_of_add_table(dev);
+ if (ret) {
+ dev_err(dev, "failed to add OPP table: %d\n", ret);
+ goto put_clk;
+ }
+
+ opp = dev_pm_opp_from_clk_rate(dev);
+ if (IS_ERR(opp)) {
+ dev_err(dev, "failed to get current OPP: %pe\n", opp);
+ ret = PTR_ERR(opp);
+ } else {
+ ret = dev_pm_opp_get_required_pstate(opp, 0);
+ dev_pm_opp_put(opp);
+ }
+
+ *dev_suspended = true;
+
+ dev_pm_opp_of_remove_table(dev);
+put_clk:
+ dev_pm_opp_put_clkname(clk_opp_table);
+put_hw:
+ dev_pm_opp_put_supported_hw(hw_opp_table);
+
+ return ret;
+}
+
/*
* TODO Figure out a way to call this with the struct tegra_pmc * passed in.
* This currently doesn't work because readx_poll_timeout() can only operate
@@ -1237,6 +1321,7 @@ static int tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
pg->id = id;
pg->genpd.name = np->name;
+ pg->genpd.get_performance_state = tegra_pmc_pd_get_performance_state;
pg->genpd.power_off = tegra_genpd_power_off;
pg->genpd.power_on = tegra_genpd_power_on;
pg->pmc = pmc;
@@ -1353,6 +1438,7 @@ static int tegra_pmc_core_pd_add(struct tegra_pmc *pmc, struct device_node *np)
return -ENOMEM;
genpd->name = np->name;
+ genpd->get_performance_state = tegra_pmc_pd_get_performance_state;
genpd->set_performance_state = tegra_pmc_core_pd_set_performance_state;
genpd->opp_to_performance_state = tegra_pmc_core_pd_opp_to_performance_state;
Implement get_performance_state() callback of power domains to initialize theirs performance state in accordance to the clock rate of attached device. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/soc/tegra/pmc.c | 86 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+)