@@ -7,7 +7,6 @@
#include <linux/device.h>
#include <linux/module.h>
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -23,8 +22,6 @@
#define DRIVER "ptp_ixp46x"
#define N_EXT_TS 2
-#define MASTER_GPIO 8
-#define SLAVE_GPIO 7
struct ixp_clock {
struct ixp46x_ts_regs *regs;
@@ -245,38 +242,6 @@ static const struct ptp_clock_info ptp_ixp_caps = {
static struct ixp_clock ixp_clock;
-static int setup_interrupt(int gpio)
-{
- int irq;
- int err;
-
- err = gpio_request(gpio, "ixp4-ptp");
- if (err)
- return err;
-
- err = gpio_direction_input(gpio);
- if (err)
- return err;
-
- irq = gpio_to_irq(gpio);
- if (irq < 0)
- return irq;
-
- err = irq_set_irq_type(irq, IRQF_TRIGGER_FALLING);
- if (err) {
- pr_err("cannot set trigger type for irq %d\n", irq);
- return err;
- }
-
- err = request_irq(irq, isr, 0, DRIVER, &ixp_clock);
- if (err) {
- pr_err("request_irq failed for irq %d\n", irq);
- return err;
- }
-
- return irq;
-}
-
int ixp46x_ptp_find(struct ixp46x_ts_regs *__iomem *regs, int *phc_index)
{
*regs = ixp_clock.regs;
@@ -289,18 +254,20 @@ int ixp46x_ptp_find(struct ixp46x_ts_regs *__iomem *regs, int *phc_index)
}
EXPORT_SYMBOL_GPL(ixp46x_ptp_find);
-static int ptp_ixp_remove(struct platform_device *pdev)
+/* Called from the registered devm action */
+static void ptp_ixp_unregister_action(void *d)
{
- free_irq(ixp_clock.master_irq, &ixp_clock);
- free_irq(ixp_clock.slave_irq, &ixp_clock);
- ptp_clock_unregister(ixp_clock.ptp_clock);
- ixp_clock.ptp_clock = NULL;
+ struct ptp_clock *ptp_clock = d;
- return 0;
+ ptp_clock_unregister(ptp_clock);
+ ixp_clock.ptp_clock = NULL;
}
static int ptp_ixp_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ int ret;
+
ixp_clock.regs = devm_platform_ioremap_resource(pdev, 0);
ixp_clock.master_irq = platform_get_irq(pdev, 0);
ixp_clock.slave_irq = platform_get_irq(pdev, 1);
@@ -315,34 +282,39 @@ static int ptp_ixp_probe(struct platform_device *pdev)
if (IS_ERR(ixp_clock.ptp_clock))
return PTR_ERR(ixp_clock.ptp_clock);
+ ret = devm_add_action_or_reset(dev, ptp_ixp_unregister_action,
+ ixp_clock.ptp_clock);
+ if (ret) {
+ dev_err(dev, "failed to install clock removal handler\n");
+ return ret;
+ }
+
__raw_writel(DEFAULT_ADDEND, &ixp_clock.regs->addend);
__raw_writel(1, &ixp_clock.regs->trgt_lo);
__raw_writel(0, &ixp_clock.regs->trgt_hi);
__raw_writel(TTIPEND, &ixp_clock.regs->event);
- if (ixp_clock.master_irq != setup_interrupt(MASTER_GPIO)) {
- pr_err("failed to setup gpio %d as irq\n", MASTER_GPIO);
- goto no_master;
- }
- if (ixp_clock.slave_irq != setup_interrupt(SLAVE_GPIO)) {
- pr_err("failed to setup gpio %d as irq\n", SLAVE_GPIO);
- goto no_slave;
- }
+ ret = devm_request_irq(dev, ixp_clock.master_irq, isr,
+ 0, DRIVER, &ixp_clock);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "request_irq failed for irq %d\n",
+ ixp_clock.master_irq);
+
+ ret = devm_request_irq(dev, ixp_clock.slave_irq, isr,
+ 0, DRIVER, &ixp_clock);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "request_irq failed for irq %d\n",
+ ixp_clock.slave_irq);
return 0;
-no_slave:
- free_irq(ixp_clock.master_irq, &ixp_clock);
-no_master:
- ptp_clock_unregister(ixp_clock.ptp_clock);
- ixp_clock.ptp_clock = NULL;
- return -ENODEV;
}
static struct platform_driver ptp_ixp_driver = {
.driver.name = "ptp-ixp46x",
.driver.suppress_bind_attrs = true,
.probe = ptp_ixp_probe,
- .remove = ptp_ixp_remove,
};
module_platform_driver(ptp_ixp_driver);
The driver is being passed interrupts, then looking up the same interrupts as GPIOs a second time to convert them into interrupts and set properties on them. This is pointless: the GPIO and irqchip APIs of a GPIO chip are orthogonal. Just request the interrupts and be done with it, drop reliance on any GPIO functions or definitions. Use devres-managed functions and add a small devress quirk to unregister the clock as well and we can rely on devres to handle all the resources and cut down a bunch of boilerplate in the process. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/net/ethernet/xscale/ptp_ixp46x.c | 84 ++++++++---------------- 1 file changed, 28 insertions(+), 56 deletions(-) -- 2.31.1