diff mbox series

[v2,5/5] usb: isp1760: otg control register access

Message ID 20210827131154.4151862-6-rui.silva@linaro.org
State New
Headers show
Series usb: isp1760: arm tc2 board isp1761 fixes | expand

Commit Message

Rui Miguel Silva Aug. 27, 2021, 1:11 p.m. UTC 
The set/clear of the otg control values is done writing to
two different 16bit registers, however we setup the regmap
width for isp1760/61 to 32bit value bits.

So, just access the clear register address (0x376)as the high
part of the otg control register set (0x374), and write the
values in one go to make sure they get clear/set.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>

---
 drivers/usb/isp1760/isp1760-core.c | 50 ++++++++++++++++--------------
 drivers/usb/isp1760/isp1760-regs.h | 16 ++++++++++
 2 files changed, 42 insertions(+), 24 deletions(-)

-- 
2.33.0
diff mbox series

Patch

diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
index cb70f9d63cdd..d1d9a7d5da17 100644
--- a/drivers/usb/isp1760/isp1760-core.c
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -30,6 +30,7 @@  static int isp1760_init_core(struct isp1760_device *isp)
 {
 	struct isp1760_hcd *hcd = &isp->hcd;
 	struct isp1760_udc *udc = &isp->udc;
+	u32 otg_ctrl;
 
 	/* Low-level chip reset */
 	if (isp->rst_gpio) {
@@ -83,16 +84,17 @@  static int isp1760_init_core(struct isp1760_device *isp)
 	 *
 	 * TODO: Really support OTG. For now we configure port 1 in device mode
 	 */
-	if (((isp->devflags & ISP1760_FLAG_ISP1761) ||
-	     (isp->devflags & ISP1760_FLAG_ISP1763)) &&
-	    (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN)) {
-		isp1760_field_set(hcd->fields, HW_DM_PULLDOWN);
-		isp1760_field_set(hcd->fields, HW_DP_PULLDOWN);
-		isp1760_field_set(hcd->fields, HW_OTG_DISABLE);
-	} else {
-		isp1760_field_set(hcd->fields, HW_SW_SEL_HC_DC);
-		isp1760_field_set(hcd->fields, HW_VBUS_DRV);
-		isp1760_field_set(hcd->fields, HW_SEL_CP_EXT);
+	if (isp->devflags & ISP1760_FLAG_ISP1761) {
+		if (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN) {
+			otg_ctrl = (ISP176x_HW_DM_PULLDOWN_CLEAR |
+				    ISP176x_HW_DP_PULLDOWN_CLEAR |
+				    ISP176x_HW_OTG_DISABLE);
+		} else {
+			otg_ctrl = (ISP176x_HW_SW_SEL_HC_DC_CLEAR |
+				    ISP176x_HW_VBUS_DRV |
+				    ISP176x_HW_SEL_CP_EXT);
+		}
+		isp1760_reg_write(hcd->regs, ISP176x_HC_OTG_CTRL, otg_ctrl);
 	}
 
 	dev_info(isp->dev, "%s bus width: %u, oc: %s\n",
@@ -235,20 +237,20 @@  static const struct reg_field isp1760_hc_reg_fields[] = {
 	[HC_ISO_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_AND, 0, 31),
 	[HC_INT_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_INT_IRQ_MASK_AND, 0, 31),
 	[HC_ATL_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_AND, 0, 31),
-	[HW_OTG_DISABLE]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 10, 10),
-	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 7, 7),
-	[HW_VBUS_DRV]		= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 4, 4),
-	[HW_SEL_CP_EXT]		= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 3, 3),
-	[HW_DM_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 2, 2),
-	[HW_DP_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 1, 1),
-	[HW_DP_PULLUP]		= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 0, 0),
-	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 10, 10),
-	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 7, 7),
-	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 4, 4),
-	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 3, 3),
-	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 2, 2),
-	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 1, 1),
-	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 0, 0),
+	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 26, 26),
+	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 23, 23),
+	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 20, 20),
+	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 19, 19),
+	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 18, 18),
+	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 17, 17),
+	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 16, 16),
+	[HW_OTG_DISABLE]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 10, 10),
+	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 7, 7),
+	[HW_VBUS_DRV]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 4, 4),
+	[HW_SEL_CP_EXT]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 3, 3),
+	[HW_DM_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 2, 2),
+	[HW_DP_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 1, 1),
+	[HW_DP_PULLUP]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 0, 0),
 };
 
 static const struct reg_field isp1763_hc_reg_fields[] = {
diff --git a/drivers/usb/isp1760/isp1760-regs.h b/drivers/usb/isp1760/isp1760-regs.h
index 94ea60c20b2a..3a6751197e97 100644
--- a/drivers/usb/isp1760/isp1760-regs.h
+++ b/drivers/usb/isp1760/isp1760-regs.h
@@ -61,6 +61,7 @@ 
 #define ISP176x_HC_INT_IRQ_MASK_AND	0x328
 #define ISP176x_HC_ATL_IRQ_MASK_AND	0x32c
 
+#define ISP176x_HC_OTG_CTRL		0x374
 #define ISP176x_HC_OTG_CTRL_SET		0x374
 #define ISP176x_HC_OTG_CTRL_CLEAR	0x376
 
@@ -179,6 +180,21 @@  enum isp176x_host_controller_fields {
 #define ISP176x_DC_IESUSP		BIT(3)
 #define ISP176x_DC_IEBRST		BIT(0)
 
+#define ISP176x_HW_OTG_DISABLE_CLEAR	BIT(26)
+#define ISP176x_HW_SW_SEL_HC_DC_CLEAR	BIT(23)
+#define ISP176x_HW_VBUS_DRV_CLEAR	BIT(20)
+#define ISP176x_HW_SEL_CP_EXT_CLEAR	BIT(19)
+#define ISP176x_HW_DM_PULLDOWN_CLEAR	BIT(18)
+#define ISP176x_HW_DP_PULLDOWN_CLEAR	BIT(17)
+#define ISP176x_HW_DP_PULLUP_CLEAR	BIT(16)
+#define ISP176x_HW_OTG_DISABLE		BIT(10)
+#define ISP176x_HW_SW_SEL_HC_DC		BIT(7)
+#define ISP176x_HW_VBUS_DRV		BIT(4)
+#define ISP176x_HW_SEL_CP_EXT		BIT(3)
+#define ISP176x_HW_DM_PULLDOWN		BIT(2)
+#define ISP176x_HW_DP_PULLDOWN		BIT(1)
+#define ISP176x_HW_DP_PULLUP		BIT(0)
+
 #define ISP176x_DC_ENDPTYP_ISOC		0x01
 #define ISP176x_DC_ENDPTYP_BULK		0x02
 #define ISP176x_DC_ENDPTYP_INTERRUPT	0x03