diff mbox series

[4/5] usb: isp1760: use the right irq status bit

Message ID 20210827082112.4061086-5-rui.silva@linaro.org
State Superseded
Headers show
Series usb: isp1760: arm tc2 board isp1761 fixes | expand

Commit Message

Rui Miguel Silva Aug. 27, 2021, 8:21 a.m. UTC 
Instead of using the fields enum values to check interrupts
trigged, use the correct bit values.

Reported-by: Dietmar Eggemann <deggeman@gmx.de>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

---
 drivers/usb/isp1760/isp1760-udc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

-- 
2.33.0
diff mbox series

Patch

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index a78da59d6417..5cafd23345ca 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1363,7 +1363,7 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 
 	status = isp1760_udc_irq_get_status(udc);
 
-	if (status & DC_IEVBUS) {
+	if (status & ISP176x_DC_IEVBUS) {
 		dev_dbg(udc->isp->dev, "%s(VBUS)\n", __func__);
 		/* The VBUS interrupt is only triggered when VBUS appears. */
 		spin_lock(&udc->lock);
@@ -1371,7 +1371,7 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		spin_unlock(&udc->lock);
 	}
 
-	if (status & DC_IEBRST) {
+	if (status & ISP176x_DC_IEBRST) {
 		dev_dbg(udc->isp->dev, "%s(BRST)\n", __func__);
 
 		isp1760_udc_reset(udc);
@@ -1391,18 +1391,18 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		}
 	}
 
-	if (status & DC_IEP0SETUP) {
+	if (status & ISP176x_DC_IEP0SETUP) {
 		dev_dbg(udc->isp->dev, "%s(EP0SETUP)\n", __func__);
 
 		isp1760_ep0_setup(udc);
 	}
 
-	if (status & DC_IERESM) {
+	if (status & ISP176x_DC_IERESM) {
 		dev_dbg(udc->isp->dev, "%s(RESM)\n", __func__);
 		isp1760_udc_resume(udc);
 	}
 
-	if (status & DC_IESUSP) {
+	if (status & ISP176x_DC_IESUSP) {
 		dev_dbg(udc->isp->dev, "%s(SUSP)\n", __func__);
 
 		spin_lock(&udc->lock);
@@ -1413,7 +1413,7 @@  static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		spin_unlock(&udc->lock);
 	}
 
-	if (status & DC_IEHS_STA) {
+	if (status & ISP176x_DC_IEHS_STA) {
 		dev_dbg(udc->isp->dev, "%s(HS_STA)\n", __func__);
 		udc->gadget.speed = USB_SPEED_HIGH;
 	}