diff mbox series

[v3,6/8] dt-bindings: clock: samsung: convert Exynos AudSS to dtschema

Message ID 20210825134251.220098-1-krzysztof.kozlowski@canonical.com
State Accepted
Commit e1ec390920888705e3a53b62dd594478a34ee610
Headers show
Series [v3,1/8] dt-bindings: clock: samsung: convert Exynos5250 to dtschema | expand

Commit Message

Krzysztof Kozlowski Aug. 25, 2021, 1:42 p.m. UTC
Convert Samsung Exynos Audio SubSystem clock controller bindings to DT
schema format using json-schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
---
 .../bindings/clock/clk-exynos-audss.txt       | 103 ------------------
 .../clock/samsung,exynos-audss-clock.yaml     |  80 ++++++++++++++
 2 files changed, 80 insertions(+), 103 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
 create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml

Comments

Stephen Boyd Aug. 29, 2021, 7:08 a.m. UTC | #1
Quoting Krzysztof Kozlowski (2021-08-25 06:42:49)
> Convert Samsung Exynos Audio SubSystem clock controller bindings to DT
> schema format using json-schema.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---

Applied to clk-next
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
deleted file mode 100644
index 6030afb10b5c..000000000000
--- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
+++ /dev/null
@@ -1,103 +0,0 @@ 
-* Samsung Audio Subsystem Clock Controller
-
-The Samsung Audio Subsystem clock controller generates and supplies clocks
-to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
-binding described here is applicable to all SoCs in Exynos family.
-
-Required Properties:
-
-- compatible: should be one of the following:
-  - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
-  - "samsung,exynos5250-audss-clock" - controller compatible with Exynos5250
-    SoCs.
-  - "samsung,exynos5410-audss-clock" - controller compatible with Exynos5410
-    SoCs.
-  - "samsung,exynos5420-audss-clock" - controller compatible with Exynos5420
-    SoCs.
-- reg: physical base address and length of the controller's register set.
-
-- #clock-cells: should be 1.
-
-- clocks:
-  - pll_ref: Fixed rate PLL reference clock, parent of mout_audss. "fin_pll"
-    is used if not specified.
-  - pll_in: Input PLL to the AudioSS block, parent of mout_audss. "fout_epll"
-    is used if not specified.
-  - cdclk: External i2s clock, parent of mout_i2s. "cdclk0" is used if not
-    specified.
-  - sclk_audio: Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if
-    not specified.
-  - sclk_pcm_in: PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not
-    specified.
-
-- clock-names: Aliases for the above clocks. They should be "pll_ref",
-  "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively.
-
-Optional Properties:
-
-  - power-domains: a phandle to respective power domain node as described by
-    generic PM domain bindings (see power/power_domain.txt for more
-    information).
-
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume. Some of the clocks are available only on a particular
-Exynos4 SoC and this is specified where applicable.
-
-Provided clocks:
-
-Clock           ID      SoC (if specific)
------------------------------------------------
-
-mout_audss      0
-mout_i2s        1
-dout_srp        2
-dout_aud_bus    3
-dout_i2s        4
-srp_clk         5
-i2s_bus         6
-sclk_i2s        7
-pcm_bus         8
-sclk_pcm        9
-adma            10      Exynos5420
-
-Example 1: An example of a clock controller node using the default input
-	   clock names is listed below.
-
-clock_audss: audss-clock-controller@3810000 {
-	compatible = "samsung,exynos5250-audss-clock";
-	reg = <0x03810000 0x0C>;
-	#clock-cells = <1>;
-};
-
-Example 2: An example of a clock controller node with the input clocks
-           specified.
-
-clock_audss: audss-clock-controller@3810000 {
-	compatible = "samsung,exynos5250-audss-clock";
-	reg = <0x03810000 0x0C>;
-	#clock-cells = <1>;
-	clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>,
-		<&ext_i2s_clk>;
-	clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
-};
-
-Example 3: I2S controller node that consumes the clock generated by the clock
-           controller. Refer to the standard clock bindings for information
-           about 'clocks' and 'clock-names' property.
-
-i2s0: i2s@3830000 {
-	compatible = "samsung,i2s-v5";
-	reg = <0x03830000 0x100>;
-	dmas = <&pdma0 10
-		&pdma0 9
-		&pdma0 8>;
-	dma-names = "tx", "rx", "tx-sec";
-	clocks = <&clock_audss EXYNOS_I2S_BUS>,
-		<&clock_audss EXYNOS_I2S_BUS>,
-		<&clock_audss EXYNOS_SCLK_I2S>,
-		<&clock_audss EXYNOS_MOUT_AUDSS>,
-		<&clock_audss EXYNOS_MOUT_I2S>;
-	clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
-		      "mout_audss", "mout_i2s";
-};
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
new file mode 100644
index 000000000000..f14f1d39da36
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos-audss-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Audio SubSystem clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos-audss-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-audss-clock
+      - samsung,exynos5250-audss-clock
+      - samsung,exynos5410-audss-clock
+      - samsung,exynos5420-audss-clock
+
+  clocks:
+    minItems: 2
+    items:
+      - description:
+          Fixed rate PLL reference clock, parent of mout_audss. "fin_pll" is
+          used if not specified.
+      - description:
+          Input PLL to the AudioSS block, parent of mout_audss. "fout_epll" is
+          used if not specified.
+      - description:
+          Audio bus clock, parent of mout_i2s. "sclk_audio0" is used if not
+          specified.
+      - description:
+          PCM clock, parent of sclk_pcm.  "sclk_pcm0" is used if not specified.
+      - description:
+          External i2s clock, parent of mout_i2s. "cdclk0" is used if not
+          specified.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll_ref
+      - const: pll_in
+      - const: sclk_audio
+      - const: sclk_pcm_in
+      - const: cdclk
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@3810000 {
+        compatible = "samsung,exynos5250-audss-clock";
+        reg = <0x03810000 0x0c>;
+        #clock-cells = <1>;
+        clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>, <&ext_i2s_clk>;
+        clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in", "cdclk";
+    };