@@ -47,12 +47,12 @@ config SERIAL_AMBA_PL010_CONSOLE
config SERIAL_AMBA_PL011
tristate "ARM AMBA PL011 serial port support"
- depends on ARM_AMBA
+ depends on ARM_AMBA || SOC_ZX296702
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
- here.
+ here. Say Y or M if you have SOC_ZX296702.
If unsure, say N.
@@ -74,6 +74,10 @@
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
+ unsigned int fr_busy;
+ unsigned int fr_dsr;
+ unsigned int fr_cts;
+ unsigned int fr_ri;
unsigned int lcrh_tx;
unsigned int lcrh_rx;
u16 *reg_lut;
@@ -106,6 +110,7 @@ enum reg_idx {
REG_DMACR = IDX(UART011_DMACR),
};
+#ifdef CONFIG_ARM_AMBA
static u16 arm_reg[] = {
[REG_DR] = UART01x_DR,
[REG_RSR] = UART01x_RSR,
@@ -132,6 +137,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.lcrh_tx = REG_LCRH,
.lcrh_rx = REG_LCRH,
.reg_lut = arm_reg,
@@ -167,6 +176,10 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fr_busy = UART01x_FR_BUSY,
+ .fr_dsr = UART01x_FR_DSR,
+ .fr_cts = UART01x_FR_CTS,
+ .fr_ri = UART011_FR_RI,
.lcrh_tx = REG_LCRH,
.lcrh_rx = REG_ST_LCRH_RX,
.reg_lut = st_reg,
@@ -175,6 +188,48 @@ static struct vendor_data vendor_st = {
.cts_event_workaround = true,
.get_fifosize = get_fifosize_st,
};
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static u16 zte_reg[] = {
+ [REG_DR] = ZX_UART01x_DR,
+ [REG_RSR] = UART01x_RSR,
+ [REG_ST_DMAWM] = ST_UART011_DMAWM,
+ [REG_FR] = ZX_UART01x_FR,
+ [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX,
+ [REG_ILPR] = UART01x_ILPR,
+ [REG_IBRD] = UART011_IBRD,
+ [REG_FBRD] = UART011_FBRD,
+ [REG_LCRH] = ZX_UART011_LCRH_TX,
+ [REG_CR] = ZX_UART011_CR,
+ [REG_IFLS] = ZX_UART011_IFLS,
+ [REG_IMSC] = ZX_UART011_IMSC,
+ [REG_RIS] = UART011_RIS,
+ [REG_MIS] = ZX_UART011_MIS,
+ [REG_ICR] = ZX_UART011_ICR,
+ [REG_DMACR] = ZX_UART011_DMACR,
+};
+
+static unsigned int get_fifosize_zx(struct amba_device *dev)
+{
+ return 16;
+}
+
+static struct vendor_data vendor_zte = {
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fr_busy = ZX_UART01x_FR_BUSY,
+ .fr_dsr = ZX_UART01x_FR_DSR,
+ .fr_cts = ZX_UART01x_FR_CTS,
+ .fr_ri = ZX_UART011_FR_RI,
+ .lcrh_tx = REG_LCRH,
+ .lcrh_rx = REG_ST_LCRH_RX,
+ .reg_lut = zte_reg,
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .get_fifosize = get_fifosize_zx,
+};
+#endif
/* Deals with DMA transactions */
@@ -218,6 +273,10 @@ struct uart_amba_port {
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
+ unsigned int fr_busy; /* vendor-specific */
+ unsigned int fr_dsr; /* vendor-specific */
+ unsigned int fr_cts; /* vendor-specific */
+ unsigned int fr_ri; /* vendor-specific */
unsigned int lcrh_tx; /* vendor-specific */
unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
@@ -1148,7 +1207,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
- while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
+ while (pl011_readw(uap, REG_FR) & uap->fr_busy)
barrier();
spin_lock_irq(&uap->port.lock);
@@ -1431,11 +1490,11 @@ static void pl011_modem_status(struct uart_amba_port *uap)
if (delta & UART01x_FR_DCD)
uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
- if (delta & UART01x_FR_DSR)
+ if (delta & uap->fr_dsr)
uap->port.icount.dsr++;
- if (delta & UART01x_FR_CTS)
- uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+ if (delta & uap->fr_cts)
+ uart_handle_cts_change(&uap->port, status & uap->fr_cts);
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
@@ -1522,7 +1581,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int status = pl011_readw(uap, REG_FR);
- return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+ return status & (uap->fr_busy|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
static unsigned int pl011_get_mctrl(struct uart_port *port)
@@ -1537,9 +1596,9 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
result |= tiocmbit
TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR);
- TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR);
- TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS);
- TIOCMBIT(UART011_FR_RI, TIOCM_RNG);
+ TIOCMBIT(uap->fr_dsr, TIOCM_DSR);
+ TIOCMBIT(uap->fr_cts, TIOCM_CTS);
+ TIOCMBIT(uap->fr_ri, TIOCM_RNG);
#undef TIOCMBIT
return result;
}
@@ -2107,7 +2166,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
*/
do {
status = pl011_readw(uap, REG_FR);
- } while (status & UART01x_FR_BUSY);
+ } while (status & uap->fr_busy);
pl011_writew(uap, old_cr, REG_CR);
if (locked)
@@ -2218,7 +2277,7 @@ static void pl011_putc(struct uart_port *port, int c)
while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
;
pl011_writeb(uap, c, REG_DR);
- while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
+ while (pl011_readw(uap, REG_FR) & uap->fr_busy)
;
}
@@ -2255,6 +2314,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
+#ifdef CONFIG_ARM_AMBA
static int pl011_probe_dt_alias(int index, struct device *dev)
{
struct device_node *np;
@@ -2321,6 +2381,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->reg_lut = vendor->reg_lut;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->fr_ri = vendor->fr_ri;
uap->old_cr = 0;
uap->fifosize = vendor->get_fifosize(dev);
uap->port.dev = &dev->dev;
@@ -2381,6 +2445,101 @@ static int pl011_remove(struct amba_device *dev)
uart_unregister_driver(&amba_reg);
return 0;
}
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static int zx_uart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct uart_amba_port *uap;
+ struct vendor_data *vendor = &vendor_zte;
+ struct resource *res;
+ void __iomem *base;
+ int i, ret;
+
+ uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (uap == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ i = of_alias_get_id(np, "serial");
+ if (i < 0) {
+ dev_err(&pdev->dev, "failed to get alias id: %d\n", i);
+ ret = i;
+ goto out;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (!base) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ uap->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uap->clk)) {
+ ret = PTR_ERR(uap->clk);
+ goto out;
+ }
+
+ uap->vendor = vendor;
+ uap->reg_lut = vendor->reg_lut;
+ uap->fr_busy = vendor->fr_busy;
+ uap->fr_dsr = vendor->fr_dsr;
+ uap->fr_cts = vendor->fr_cts;
+ uap->fr_ri = vendor->fr_ri;
+ uap->old_cr = 0;
+ uap->fifosize = 16;
+ uap->port.dev = &pdev->dev;
+ uap->port.mapbase = res->start;
+ uap->port.membase = base;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = platform_get_irq(pdev, 0);
+ uap->port.fifosize = uap->fifosize;
+ uap->port.ops = &amba_pl011_pops;
+ uap->port.flags = UPF_BOOT_AUTOCONF;
+ uap->port.line = i;
+ INIT_DELAYED_WORK(&uap->tx_softirq_work, pl011_tx_softirq);
+
+ /* Ensure interrupts from this UART are masked and cleared */
+ pl011_writew(uap, 0, REG_IMSC);
+ pl011_writew(uap, 0xffff, REG_ICR);
+
+ amba_ports[i] = uap;
+
+ platform_set_drvdata(pdev, uap);
+ ret = uart_register_driver(&amba_reg);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Failed to register AMBA-PL011 driver\n");
+ return ret;
+ }
+ ret = uart_add_one_port(&amba_reg, &uap->port);
+ if (ret) {
+ amba_ports[i] = NULL;
+ pl011_dma_remove(uap);
+ }
+out:
+ return ret;
+}
+
+static int zx_uart_remove(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap = platform_get_drvdata(pdev);
+ int i;
+
+ uart_remove_one_port(&amba_reg, &uap->port);
+
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
+
+ pl011_dma_remove(uap);
+ return 0;
+}
+#endif
#ifdef CONFIG_PM_SLEEP
static int pl011_suspend(struct device *dev)
@@ -2406,6 +2565,7 @@ static int pl011_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+#ifdef CONFIG_ARM_AMBA
static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
@@ -2431,17 +2591,49 @@ static struct amba_driver pl011_driver = {
.probe = pl011_probe,
.remove = pl011_remove,
};
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+static const struct of_device_id zx_uart_dt_ids[] = {
+ { .compatible = "zte,zx296702-uart", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zx_uart_dt_ids);
+
+static struct platform_driver zx_uart_driver = {
+ .driver = {
+ .name = "zx-uart",
+ .owner = THIS_MODULE,
+ .pm = &pl011_dev_pm_ops,
+ .of_match_table = zx_uart_dt_ids,
+ },
+ .probe = zx_uart_probe,
+ .remove = zx_uart_remove,
+};
+#endif
+
static int __init pl011_init(void)
{
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+#ifdef CONFIG_ARM_AMBA
return amba_driver_register(&pl011_driver);
+#endif
+
+#ifdef CONFIG_SOC_ZX296702
+ return platform_driver_register(&zx_uart_driver);
+#endif
}
static void __exit pl011_exit(void)
{
+#ifdef CONFIG_ARM_AMBA
amba_driver_unregister(&pl011_driver);
+#endif
+#ifdef CONFIG_SOC_ZX296702
+ platform_driver_unregister(&zx_uart_driver);
+#endif
}
/*
@@ -33,12 +33,14 @@
#define UART01x_DR 0x00 /* Data read or written from the interface. */
#define UART01x_RSR 0x04 /* Receive status register (Read). */
#define UART01x_ECR 0x04 /* Error clear register (Write). */
+#define ZX_UART01x_DR 0x04 /* Data read or written from the interface. */
#define UART010_LCRH 0x08 /* Line control register, high byte. */
#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */
#define UART010_LCRM 0x0C /* Line control register, middle byte. */
#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */
#define UART010_LCRL 0x10 /* Line control register, low byte. */
#define UART010_CR 0x14 /* Control register. */
+#define ZX_UART01x_FR 0x14 /* Flag register (Read only). */
#define UART01x_FR 0x18 /* Flag register (Read only). */
#define UART010_IIR 0x1C /* Interrupt identification register (Read). */
#define UART010_ICR 0x1C /* Interrupt clear register (Write). */
@@ -49,13 +51,21 @@
#define UART011_LCRH 0x2c /* Line control register. */
#define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */
#define UART011_CR 0x30 /* Control register. */
+#define ZX_UART011_LCRH_TX 0x30 /* Tx Line control register. */
#define UART011_IFLS 0x34 /* Interrupt fifo level select. */
+#define ZX_UART011_CR 0x34 /* Control register. */
+#define ZX_UART011_IFLS 0x38 /* Interrupt fifo level select. */
#define UART011_IMSC 0x38 /* Interrupt mask. */
#define UART011_RIS 0x3c /* Raw interrupt status. */
#define UART011_MIS 0x40 /* Masked interrupt status. */
+#define ZX_UART011_IMSC 0x40 /* Interrupt mask. */
#define UART011_ICR 0x44 /* Interrupt clear register. */
+#define ZX_UART011_RIS 0x44 /* Raw interrupt status. */
#define UART011_DMACR 0x48 /* DMA control register. */
+#define ZX_UART011_MIS 0x48 /* Masked interrupt status. */
+#define ZX_UART011_ICR 0x4c /* Interrupt clear register. */
#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */
+#define ZX_UART011_DMACR 0x50 /* DMA control register. */
#define ST_UART011_XON1 0x54 /* XON1 register. */
#define ST_UART011_XON2 0x58 /* XON2 register. */
#define ST_UART011_XOFF1 0x5C /* XON1 register. */
@@ -75,15 +85,19 @@
#define UART01x_RSR_PE 0x02
#define UART01x_RSR_FE 0x01
+#define ZX_UART01x_FR_BUSY 0x300
#define UART011_FR_RI 0x100
#define UART011_FR_TXFE 0x080
#define UART011_FR_RXFF 0x040
#define UART01x_FR_TXFF 0x020
#define UART01x_FR_RXFE 0x010
#define UART01x_FR_BUSY 0x008
+#define ZX_UART01x_FR_DSR 0x008
#define UART01x_FR_DCD 0x004
#define UART01x_FR_DSR 0x002
+#define ZX_UART01x_FR_CTS 0x002
#define UART01x_FR_CTS 0x001
+#define ZX_UART011_FR_RI 0x001
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */