diff mbox series

[v2] x86/efi: Restore Firmware IDT before calling ExitBootServices()

Message ID 20210820125703.32410-1-joro@8bytes.org
State New
Headers show
Series [v2] x86/efi: Restore Firmware IDT before calling ExitBootServices() | expand

Commit Message

Joerg Roedel Aug. 20, 2021, 12:57 p.m. UTC
From: Joerg Roedel <jroedel@suse.de>

Commit 79419e13e808 ("x86/boot/compressed/64: Setup IDT in startup_32
boot path") introduced an IDT into the 32 bit boot path of the
decompressor stub.  But the IDT is set up before ExitBootServices() is
called and some UEFI firmwares rely on their own IDT.

Save the firmware IDT on boot and restore it before calling into EFI
functions to fix boot failures introduced by above commit.

Reported-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Fixes: 79419e13e808 ("x86/boot/compressed/64: Setup IDT in startup_32 boot path")
Cc: stable@vger.kernel.org # 5.13+
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/boot/compressed/efi_thunk_64.S | 30 +++++++++++++++++--------
 arch/x86/boot/compressed/head_64.S      |  3 +++
 2 files changed, 24 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/x86/boot/compressed/efi_thunk_64.S b/arch/x86/boot/compressed/efi_thunk_64.S
index 95a223b3e56a..8bb92e9f4e97 100644
--- a/arch/x86/boot/compressed/efi_thunk_64.S
+++ b/arch/x86/boot/compressed/efi_thunk_64.S
@@ -5,9 +5,8 @@ 
  * Early support for invoking 32-bit EFI services from a 64-bit kernel.
  *
  * Because this thunking occurs before ExitBootServices() we have to
- * restore the firmware's 32-bit GDT before we make EFI service calls,
- * since the firmware's 32-bit IDT is still currently installed and it
- * needs to be able to service interrupts.
+ * restore the firmware's 32-bit GDT and IDT before we make EFI service
+ * calls.
  *
  * On the plus side, we don't have to worry about mangling 64-bit
  * addresses into 32-bits because we're executing with an identity
@@ -39,7 +38,7 @@  SYM_FUNC_START(__efi64_thunk)
 	/*
 	 * Convert x86-64 ABI params to i386 ABI
 	 */
-	subq	$32, %rsp
+	subq	$64, %rsp
 	movl	%esi, 0x0(%rsp)
 	movl	%edx, 0x4(%rsp)
 	movl	%ecx, 0x8(%rsp)
@@ -49,14 +48,19 @@  SYM_FUNC_START(__efi64_thunk)
 	leaq	0x14(%rsp), %rbx
 	sgdt	(%rbx)
 
+	addq	$16, %rbx
+	sidt	(%rbx)
+
 	/*
-	 * Switch to gdt with 32-bit segments. This is the firmware GDT
-	 * that was installed when the kernel started executing. This
-	 * pointer was saved at the EFI stub entry point in head_64.S.
+	 * Switch to IDT and GDT with 32-bit segments. This is the firmware GDT
+	 * and IDT that was installed when the kernel started executing. The
+	 * pointers were saved at the EFI stub entry point in head_64.S.
 	 *
 	 * Pass the saved DS selector to the 32-bit code, and use far return to
 	 * restore the saved CS selector.
 	 */
+	leaq	efi32_boot_idt(%rip), %rax
+	lidt	(%rax)
 	leaq	efi32_boot_gdt(%rip), %rax
 	lgdt	(%rax)
 
@@ -67,7 +71,7 @@  SYM_FUNC_START(__efi64_thunk)
 	pushq	%rax
 	lretq
 
-1:	addq	$32, %rsp
+1:	addq	$64, %rsp
 	movq	%rdi, %rax
 
 	pop	%rbx
@@ -128,10 +132,13 @@  SYM_FUNC_START_LOCAL(efi_enter32)
 
 	/*
 	 * Some firmware will return with interrupts enabled. Be sure to
-	 * disable them before we switch GDTs.
+	 * disable them before we switch GDTs and IDTs.
 	 */
 	cli
 
+	lidtl	(%ebx)
+	subl	$16, %ebx
+
 	lgdtl	(%ebx)
 
 	movl	%cr4, %eax
@@ -166,6 +173,11 @@  SYM_DATA_START(efi32_boot_gdt)
 	.quad	0
 SYM_DATA_END(efi32_boot_gdt)
 
+SYM_DATA_START(efi32_boot_idt)
+	.word	0
+	.quad	0
+SYM_DATA_END(efi32_boot_idt)
+
 SYM_DATA_START(efi32_boot_cs)
 	.word	0
 SYM_DATA_END(efi32_boot_cs)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index a2347ded77ea..572c535cf45b 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -319,6 +319,9 @@  SYM_INNER_LABEL(efi32_pe_stub_entry, SYM_L_LOCAL)
 	movw	%cs, rva(efi32_boot_cs)(%ebp)
 	movw	%ds, rva(efi32_boot_ds)(%ebp)
 
+	/* Store firmware IDT descriptor */
+	sidtl	rva(efi32_boot_idt)(%ebp)
+
 	/* Disable paging */
 	movl	%cr0, %eax
 	btrl	$X86_CR0_PG_BIT, %eax