@@ -77,7 +77,6 @@
* I was thinking that this was a good chip until I found this restriction ;(
*/
#define SCSI2_SYNC
-#undef SCSI2_TAG
#undef DEBUG_CONNECT
#undef DEBUG_MESSAGES
@@ -990,7 +989,7 @@ fas216_reselected_intr(FAS216_Info *info)
info->scsi.disconnectable = 0;
if (info->SCpnt->device->id == target &&
info->SCpnt->device->lun == lun &&
- info->SCpnt->tag == tag) {
+ scsi_cmd_to_tag(info->SCpnt) == tag) {
fas216_log(info, LOG_CONNECT, "reconnected previously executing command");
} else {
queue_add_cmd_tail(&info->queues.disconnected, info->SCpnt);
@@ -1790,8 +1789,9 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
/*
* add tag message if required
*/
- if (SCpnt->tag)
- msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG, SCpnt->tag);
+ if (SCpnt->device->simple_tags)
+ msgqueue_addmsg(&info->scsi.msgs, 2, SIMPLE_QUEUE_TAG,
+ scsi_cmd_to_tag(SCpnt));
do {
#ifdef SCSI2_SYNC
@@ -1814,20 +1814,8 @@ static void fas216_start_command(FAS216_Info *info, struct scsi_cmnd *SCpnt)
static void fas216_allocate_tag(FAS216_Info *info, struct scsi_cmnd *SCpnt)
{
-#ifdef SCSI2_TAG
- /*
- * tagged queuing - allocate a new tag to this command
- */
- if (SCpnt->device->simple_tags && SCpnt->cmnd[0] != REQUEST_SENSE &&
- SCpnt->cmnd[0] != INQUIRY) {
- SCpnt->device->current_tag += 1;
- if (SCpnt->device->current_tag == 0)
- SCpnt->device->current_tag = 1;
- SCpnt->tag = SCpnt->device->current_tag;
- } else
-#endif
- set_bit(SCpnt->device->id * 8 +
- (u8)(SCpnt->device->lun & 0x7), info->busyluns);
+ set_bit(SCpnt->device->id * 8 +
+ (u8)(SCpnt->device->lun & 0x7), info->busyluns);
info->stats.removes += 1;
switch (SCpnt->cmnd[0]) {
@@ -2116,7 +2104,6 @@ fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
init_SCp(SCpnt);
SCpnt->SCp.Message = 0;
SCpnt->SCp.Status = 0;
- SCpnt->tag = 0;
SCpnt->host_scribble = (void *)fas216_rq_sns_done;
/*
@@ -2222,7 +2209,6 @@ static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
init_SCp(SCpnt);
info->stats.queues += 1;
- SCpnt->tag = 0;
spin_lock(&info->host_lock);
@@ -3002,9 +2988,8 @@ void fas216_print_devices(FAS216_Info *info, struct seq_file *m)
dev = &info->device[scd->id];
seq_printf(m, " %d/%llu ", scd->id, scd->lun);
if (scd->tagged_supported)
- seq_printf(m, "%3sabled(%3d) ",
- scd->simple_tags ? "en" : "dis",
- scd->current_tag);
+ seq_printf(m, "%3sabled ",
+ scd->simple_tags ? "en" : "dis");
else
seq_puts(m, "unsupported ");
The driver is attempting to allocated a tag internally, which is is no-go with blk-mq. Switch the driver to use the request tag and kill usage of scmd->tag and scmd->device->current_tag. Signed-off-by: Hannes Reinecke <hare@suse.de> --- drivers/scsi/arm/fas216.c | 31 ++++++++----------------------- 1 file changed, 8 insertions(+), 23 deletions(-)