@@ -3955,13 +3955,24 @@ static void rtl_clear_bp(struct r8152 *tp, u16 type)
case RTL_VER_06:
ocp_write_byte(tp, type, PLA_BP_EN, 0);
break;
+ case RTL_VER_14:
+ ocp_write_word(tp, type, USB_BP2_EN, 0);
+
+ ocp_write_word(tp, type, USB_BP_8, 0);
+ ocp_write_word(tp, type, USB_BP_9, 0);
+ ocp_write_word(tp, type, USB_BP_10, 0);
+ ocp_write_word(tp, type, USB_BP_11, 0);
+ ocp_write_word(tp, type, USB_BP_12, 0);
+ ocp_write_word(tp, type, USB_BP_13, 0);
+ ocp_write_word(tp, type, USB_BP_14, 0);
+ ocp_write_word(tp, type, USB_BP_15, 0);
+ break;
case RTL_VER_08:
case RTL_VER_09:
case RTL_VER_10:
case RTL_VER_11:
case RTL_VER_12:
case RTL_VER_13:
- case RTL_VER_14:
case RTL_VER_15:
default:
if (type == MCU_TYPE_USB) {
@@ -4331,7 +4342,6 @@ static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
case RTL_VER_11:
case RTL_VER_12:
case RTL_VER_13:
- case RTL_VER_14:
case RTL_VER_15:
fw_reg = 0xf800;
bp_ba_addr = PLA_BP_BA;
@@ -4339,6 +4349,13 @@ static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
bp_start = PLA_BP_0;
max_bp = 8;
break;
+ case RTL_VER_14:
+ fw_reg = 0xf800;
+ bp_ba_addr = PLA_BP_BA;
+ bp_en_addr = USB_BP2_EN;
+ bp_start = PLA_BP_0;
+ max_bp = 16;
+ break;
default:
goto out;
}
The maximum PLA bp number of RTL8153C is 16, not 8. That is, the bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> --- drivers/net/usb/r8152.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)