| Message ID | 20210817005507.1507580-11-dmitry.baryshkov@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | create power sequencing subsystem | expand |
On Mon 16 Aug 17:55 PDT 2021, Dmitry Baryshkov wrote: [..] > diff --git a/drivers/power/pwrseq/pwrseq_qca.c b/drivers/power/pwrseq/pwrseq_qca.c > new file mode 100644 > index 000000000000..3421a4821126 > --- /dev/null > +++ b/drivers/power/pwrseq/pwrseq_qca.c > @@ -0,0 +1,290 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2021, Linaro Ltd. > + * > + * Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > + * > + * Power Sequencer for Qualcomm WiFi + BT SoCs > + */ > + > +#include <linux/delay.h> > +#include <linux/gpio/consumer.h> > +#include <linux/platform_device.h> > +#include <linux/pwrseq/driver.h> > +#include <linux/regulator/consumer.h> > + > +/* > + * Voltage regulator information required for configuring the > + * QCA WiFi+Bluetooth chipset > + */ > +struct qca_vreg { > + const char *name; > + unsigned int load_uA; > +}; > + > +struct qca_device_data { > + struct qca_vreg vddio; Any particular reason why this isn't just the first entry in vregs and operated as part of the bulk API? > + struct qca_vreg *vregs; > + size_t num_vregs; > + bool has_bt_en; > + bool has_wifi_en; > +}; > + > +struct pwrseq_qca; > +struct pwrseq_qca_one { > + struct pwrseq_qca *common; > + struct gpio_desc *enable; > +}; > + > +#define PWRSEQ_QCA_WIFI 0 > +#define PWRSEQ_QCA_BT 1 > + > +#define PWRSEQ_QCA_MAX 2 > + > +struct pwrseq_qca { > + struct regulator *vddio; > + struct gpio_desc *sw_ctrl; > + struct pwrseq_qca_one pwrseq_qcas[PWRSEQ_QCA_MAX]; > + int num_vregs; > + struct regulator_bulk_data vregs[]; > +}; > + > +static int pwrseq_qca_power_on(struct pwrseq *pwrseq) > +{ > + struct pwrseq_qca_one *qca_one = pwrseq_get_data(pwrseq); > + int ret; > + > + if (qca_one->common->vddio) { devm_regulator_get() doesn't return NULL, so this is always true. > + ret = regulator_enable(qca_one->common->vddio); > + if (ret) > + return ret; > + } > + > + ret = regulator_bulk_enable(qca_one->common->num_vregs, qca_one->common->vregs); > + if (ret) > + goto vddio_off; > + > + if (qca_one->enable) { > + gpiod_set_value_cansleep(qca_one->enable, 0); > + msleep(50); > + gpiod_set_value_cansleep(qca_one->enable, 1); > + msleep(150); > + } > + > + if (qca_one->common->sw_ctrl) { > + bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl); > + dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state); > + } > + > + return 0; > + > +vddio_off: > + regulator_disable(qca_one->common->vddio); > + > + return ret; > +} [..] > +static int pwrseq_qca_probe(struct platform_device *pdev) > +{ > + struct pwrseq_qca *pwrseq_qca; > + struct pwrseq *pwrseq; > + struct pwrseq_provider *provider; > + struct device *dev = &pdev->dev; > + struct pwrseq_onecell_data *onecell; > + const struct qca_device_data *data; > + int ret, i; > + > + data = device_get_match_data(dev); > + if (!data) > + return -EINVAL; > + > + pwrseq_qca = devm_kzalloc(dev, struct_size(pwrseq_qca, vregs, data->num_vregs), GFP_KERNEL); > + if (!pwrseq_qca) > + return -ENOMEM; > + > + onecell = devm_kzalloc(dev, struct_size(onecell, pwrseqs, PWRSEQ_QCA_MAX), GFP_KERNEL); > + if (!onecell) > + return -ENOMEM; > + > + ret = pwrseq_qca_regulators_init(dev, pwrseq_qca, data); > + if (ret) > + return ret; > + > + if (data->has_wifi_en) { > + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable = devm_gpiod_get(dev, "wifi-enable", GPIOD_OUT_LOW); > + if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable)) { > + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable), > + "failed to acquire WIFI enable GPIO\n"); > + } > + } > + > + if (data->has_bt_en) { > + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable = devm_gpiod_get(dev, "bt-enable", GPIOD_OUT_LOW); > + if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable)) { > + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable), > + "failed to acquire BT enable GPIO\n"); > + } > + } > + > + pwrseq_qca->sw_ctrl = devm_gpiod_get_optional(dev, "swctrl", GPIOD_IN); > + if (IS_ERR(pwrseq_qca->sw_ctrl)) { > + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->sw_ctrl), > + "failed to acquire SW_CTRL gpio\n"); > + } else if (!pwrseq_qca->sw_ctrl) > + dev_info(dev, "No SW_CTRL gpio\n"); Some {} around the else as well please. Regards, Bjorn
Hi, On Fri, 20 Aug 2021 at 02:17, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Mon 16 Aug 17:55 PDT 2021, Dmitry Baryshkov wrote: > [..] > > diff --git a/drivers/power/pwrseq/pwrseq_qca.c b/drivers/power/pwrseq/pwrseq_qca.c > > new file mode 100644 > > index 000000000000..3421a4821126 > > --- /dev/null > > +++ b/drivers/power/pwrseq/pwrseq_qca.c > > @@ -0,0 +1,290 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright (c) 2021, Linaro Ltd. > > + * > > + * Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > + * > > + * Power Sequencer for Qualcomm WiFi + BT SoCs > > + */ > > + > > +#include <linux/delay.h> > > +#include <linux/gpio/consumer.h> > > +#include <linux/platform_device.h> > > +#include <linux/pwrseq/driver.h> > > +#include <linux/regulator/consumer.h> > > + > > +/* > > + * Voltage regulator information required for configuring the > > + * QCA WiFi+Bluetooth chipset > > + */ > > +struct qca_vreg { > > + const char *name; > > + unsigned int load_uA; > > +}; > > + > > +struct qca_device_data { > > + struct qca_vreg vddio; > > Any particular reason why this isn't just the first entry in vregs and > operated as part of the bulk API? Because VDDIO should be up before bringing the rest of the power sources (at least for wcn39xx). This is usually the case since VDDIO is S4A, but I'd still prefer to express this in the code. And register_bulk_enable powers up all the supplies asynchronously, thus it can not guarantee that the first entry would be powered up first. > > > + struct qca_vreg *vregs; > > + size_t num_vregs; > > + bool has_bt_en; > > + bool has_wifi_en; > > +}; > > + > > +struct pwrseq_qca; > > +struct pwrseq_qca_one { > > + struct pwrseq_qca *common; > > + struct gpio_desc *enable; > > +}; > > + > > +#define PWRSEQ_QCA_WIFI 0 > > +#define PWRSEQ_QCA_BT 1 > > + > > +#define PWRSEQ_QCA_MAX 2 > > + > > +struct pwrseq_qca { > > + struct regulator *vddio; > > + struct gpio_desc *sw_ctrl; > > + struct pwrseq_qca_one pwrseq_qcas[PWRSEQ_QCA_MAX]; > > + int num_vregs; > > + struct regulator_bulk_data vregs[]; > > +}; > > + > > +static int pwrseq_qca_power_on(struct pwrseq *pwrseq) > > +{ > > + struct pwrseq_qca_one *qca_one = pwrseq_get_data(pwrseq); > > + int ret; > > + > > + if (qca_one->common->vddio) { > > devm_regulator_get() doesn't return NULL, so this is always true. This is more of the safety guard for the cases when the qca doesn't have the special vddio supply. > > > + ret = regulator_enable(qca_one->common->vddio); > > + if (ret) > > + return ret; > > + } > > + > > + ret = regulator_bulk_enable(qca_one->common->num_vregs, qca_one->common->vregs); > > + if (ret) > > + goto vddio_off; > > + > > + if (qca_one->enable) { > > + gpiod_set_value_cansleep(qca_one->enable, 0); > > + msleep(50); > > + gpiod_set_value_cansleep(qca_one->enable, 1); > > + msleep(150); > > + } > > + > > + if (qca_one->common->sw_ctrl) { > > + bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl); > > + dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state); > > + } > > + > > + return 0; > > + > > +vddio_off: > > + regulator_disable(qca_one->common->vddio); > > + > > + return ret; > > +} > [..] > > +static int pwrseq_qca_probe(struct platform_device *pdev) > > +{ > > + struct pwrseq_qca *pwrseq_qca; > > + struct pwrseq *pwrseq; > > + struct pwrseq_provider *provider; > > + struct device *dev = &pdev->dev; > > + struct pwrseq_onecell_data *onecell; > > + const struct qca_device_data *data; > > + int ret, i; > > + > > + data = device_get_match_data(dev); > > + if (!data) > > + return -EINVAL; > > + > > + pwrseq_qca = devm_kzalloc(dev, struct_size(pwrseq_qca, vregs, data->num_vregs), GFP_KERNEL); > > + if (!pwrseq_qca) > > + return -ENOMEM; > > + > > + onecell = devm_kzalloc(dev, struct_size(onecell, pwrseqs, PWRSEQ_QCA_MAX), GFP_KERNEL); > > + if (!onecell) > > + return -ENOMEM; > > + > > + ret = pwrseq_qca_regulators_init(dev, pwrseq_qca, data); > > + if (ret) > > + return ret; > > + > > + if (data->has_wifi_en) { > > + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable = devm_gpiod_get(dev, "wifi-enable", GPIOD_OUT_LOW); > > + if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable)) { > > + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable), > > + "failed to acquire WIFI enable GPIO\n"); > > + } > > + } > > + > > + if (data->has_bt_en) { > > + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable = devm_gpiod_get(dev, "bt-enable", GPIOD_OUT_LOW); > > + if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable)) { > > + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable), > > + "failed to acquire BT enable GPIO\n"); > > + } > > + } > > + > > + pwrseq_qca->sw_ctrl = devm_gpiod_get_optional(dev, "swctrl", GPIOD_IN); > > + if (IS_ERR(pwrseq_qca->sw_ctrl)) { > > + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->sw_ctrl), > > + "failed to acquire SW_CTRL gpio\n"); > > + } else if (!pwrseq_qca->sw_ctrl) > > + dev_info(dev, "No SW_CTRL gpio\n"); > > Some {} around the else as well please. ack > > Regards, > Bjorn
On Fri 20 Aug 01:10 PDT 2021, Dmitry Baryshkov wrote: > Hi, > > On Fri, 20 Aug 2021 at 02:17, Bjorn Andersson > <bjorn.andersson@linaro.org> wrote: > > > > On Mon 16 Aug 17:55 PDT 2021, Dmitry Baryshkov wrote: > > [..] > > > diff --git a/drivers/power/pwrseq/pwrseq_qca.c b/drivers/power/pwrseq/pwrseq_qca.c > > > new file mode 100644 > > > index 000000000000..3421a4821126 > > > --- /dev/null > > > +++ b/drivers/power/pwrseq/pwrseq_qca.c > > > @@ -0,0 +1,290 @@ > > > +// SPDX-License-Identifier: GPL-2.0-only > > > +/* > > > + * Copyright (c) 2021, Linaro Ltd. > > > + * > > > + * Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > + * > > > + * Power Sequencer for Qualcomm WiFi + BT SoCs > > > + */ > > > + > > > +#include <linux/delay.h> > > > +#include <linux/gpio/consumer.h> > > > +#include <linux/platform_device.h> > > > +#include <linux/pwrseq/driver.h> > > > +#include <linux/regulator/consumer.h> > > > + > > > +/* > > > + * Voltage regulator information required for configuring the > > > + * QCA WiFi+Bluetooth chipset > > > + */ > > > +struct qca_vreg { > > > + const char *name; > > > + unsigned int load_uA; > > > +}; > > > + > > > +struct qca_device_data { > > > + struct qca_vreg vddio; > > > > Any particular reason why this isn't just the first entry in vregs and > > operated as part of the bulk API? > > Because VDDIO should be up before bringing the rest of the power > sources (at least for wcn39xx). This is usually the case since VDDIO > is S4A, but I'd still prefer to express this in the code. > And register_bulk_enable powers up all the supplies asynchronously, > thus it can not guarantee that the first entry would be powered up > first. > Ahh, forgot about the async nature of bulk_enable. Make the code a little ugly, but it needs to be done like that. Thinking about it, isn't there a required minimum time between vddio and the others in the wcn specification? > > > > > + struct qca_vreg *vregs; > > > + size_t num_vregs; > > > + bool has_bt_en; > > > + bool has_wifi_en; > > > +}; > > > + > > > +struct pwrseq_qca; > > > +struct pwrseq_qca_one { > > > + struct pwrseq_qca *common; > > > + struct gpio_desc *enable; > > > +}; > > > + > > > +#define PWRSEQ_QCA_WIFI 0 > > > +#define PWRSEQ_QCA_BT 1 > > > + > > > +#define PWRSEQ_QCA_MAX 2 > > > + > > > +struct pwrseq_qca { > > > + struct regulator *vddio; > > > + struct gpio_desc *sw_ctrl; > > > + struct pwrseq_qca_one pwrseq_qcas[PWRSEQ_QCA_MAX]; > > > + int num_vregs; > > > + struct regulator_bulk_data vregs[]; > > > +}; > > > + > > > +static int pwrseq_qca_power_on(struct pwrseq *pwrseq) > > > +{ > > > + struct pwrseq_qca_one *qca_one = pwrseq_get_data(pwrseq); > > > + int ret; > > > + > > > + if (qca_one->common->vddio) { > > > > devm_regulator_get() doesn't return NULL, so this is always true. > > This is more of the safety guard for the cases when the qca doesn't > have the special vddio supply. > If you think there's such a case coming up, then it makes sense. On the flip side, debugging the resulting panic when someone adds a new compatible without vddio is very minor... I think this looks good then. Regards, Bjorn
diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig index 36339a456b03..990c3164144e 100644 --- a/drivers/power/pwrseq/Kconfig +++ b/drivers/power/pwrseq/Kconfig @@ -19,6 +19,20 @@ config PWRSEQ_EMMC This driver can also be built as a module. If so, the module will be called pwrseq_emmc. +config PWRSEQ_QCA + tristate "Power Sequencer for Qualcomm WiFi + BT SoCs" + depends on OF + help + If you say yes to this option, support will be included for Qualcomm + WCN399x,QCA639x,QCA67xx families of hybrid WiFi and Bluetooth SoCs. + Note, this driver supports only power control for these SoC, you + still have to enable individual Bluetooth and WiFi drivers. This + driver is only necessary on ARM platforms with these chips. PCIe + cards handle power sequencing on their own. + + Say M here if you want to include support for Qualcomm WiFi+BT SoCs + as a module. This will build a module called "pwrseq_qca". + config PWRSEQ_SD8787 tristate "HW reset support for SD8787 BT + Wifi module" depends on OF diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile index 6f359d228843..556bf5582d47 100644 --- a/drivers/power/pwrseq/Makefile +++ b/drivers/power/pwrseq/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_PWRSEQ) += core.o obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o +obj-$(CONFIG_PWRSEQ_QCA) += pwrseq_qca.o obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o diff --git a/drivers/power/pwrseq/pwrseq_qca.c b/drivers/power/pwrseq/pwrseq_qca.c new file mode 100644 index 000000000000..3421a4821126 --- /dev/null +++ b/drivers/power/pwrseq/pwrseq_qca.c @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Linaro Ltd. + * + * Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + * + * Power Sequencer for Qualcomm WiFi + BT SoCs + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_device.h> +#include <linux/pwrseq/driver.h> +#include <linux/regulator/consumer.h> + +/* + * Voltage regulator information required for configuring the + * QCA WiFi+Bluetooth chipset + */ +struct qca_vreg { + const char *name; + unsigned int load_uA; +}; + +struct qca_device_data { + struct qca_vreg vddio; + struct qca_vreg *vregs; + size_t num_vregs; + bool has_bt_en; + bool has_wifi_en; +}; + +struct pwrseq_qca; +struct pwrseq_qca_one { + struct pwrseq_qca *common; + struct gpio_desc *enable; +}; + +#define PWRSEQ_QCA_WIFI 0 +#define PWRSEQ_QCA_BT 1 + +#define PWRSEQ_QCA_MAX 2 + +struct pwrseq_qca { + struct regulator *vddio; + struct gpio_desc *sw_ctrl; + struct pwrseq_qca_one pwrseq_qcas[PWRSEQ_QCA_MAX]; + int num_vregs; + struct regulator_bulk_data vregs[]; +}; + +static int pwrseq_qca_power_on(struct pwrseq *pwrseq) +{ + struct pwrseq_qca_one *qca_one = pwrseq_get_data(pwrseq); + int ret; + + if (qca_one->common->vddio) { + ret = regulator_enable(qca_one->common->vddio); + if (ret) + return ret; + } + + ret = regulator_bulk_enable(qca_one->common->num_vregs, qca_one->common->vregs); + if (ret) + goto vddio_off; + + if (qca_one->enable) { + gpiod_set_value_cansleep(qca_one->enable, 0); + msleep(50); + gpiod_set_value_cansleep(qca_one->enable, 1); + msleep(150); + } + + if (qca_one->common->sw_ctrl) { + bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl); + dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state); + } + + return 0; + +vddio_off: + regulator_disable(qca_one->common->vddio); + + return ret; +} + +static void pwrseq_qca_power_off(struct pwrseq *pwrseq) +{ + struct pwrseq_qca_one *qca_one = pwrseq_get_data(pwrseq); + + if (qca_one->enable) { + gpiod_set_value_cansleep(qca_one->enable, 0); + msleep(50); + } + + regulator_bulk_disable(qca_one->common->num_vregs, qca_one->common->vregs); + regulator_disable(qca_one->common->vddio); + + if (qca_one->common->sw_ctrl) { + bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl); + dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state); + } +} + +static const struct pwrseq_ops pwrseq_qca_ops = { + .power_on = pwrseq_qca_power_on, + .power_off = pwrseq_qca_power_off, +}; + +static int pwrseq_qca_regulators_init(struct device *dev, struct pwrseq_qca *pwrseq_qca, + const struct qca_device_data *data) +{ + int ret, i; + + pwrseq_qca->vddio = devm_regulator_get(dev, data->vddio.name); + if (IS_ERR(pwrseq_qca->vddio)) + return PTR_ERR(pwrseq_qca->vddio); + + ret = regulator_set_load(pwrseq_qca->vddio, data->vddio.load_uA); + if (ret) + return ret; + + pwrseq_qca->num_vregs = data->num_vregs; + + for (i = 0; i < pwrseq_qca->num_vregs; i++) + pwrseq_qca->vregs[i].supply = data->vregs[i].name; + + ret = devm_regulator_bulk_get(dev, pwrseq_qca->num_vregs, pwrseq_qca->vregs); + if (ret) + return ret; + + for (i = 0; i < pwrseq_qca->num_vregs; i++) { + if (!data->vregs[i].load_uA) + continue; + + ret = regulator_set_load(pwrseq_qca->vregs[i].consumer, data->vregs[i].load_uA); + if (ret) + return ret; + } + + return 0; +} + +static int pwrseq_qca_probe(struct platform_device *pdev) +{ + struct pwrseq_qca *pwrseq_qca; + struct pwrseq *pwrseq; + struct pwrseq_provider *provider; + struct device *dev = &pdev->dev; + struct pwrseq_onecell_data *onecell; + const struct qca_device_data *data; + int ret, i; + + data = device_get_match_data(dev); + if (!data) + return -EINVAL; + + pwrseq_qca = devm_kzalloc(dev, struct_size(pwrseq_qca, vregs, data->num_vregs), GFP_KERNEL); + if (!pwrseq_qca) + return -ENOMEM; + + onecell = devm_kzalloc(dev, struct_size(onecell, pwrseqs, PWRSEQ_QCA_MAX), GFP_KERNEL); + if (!onecell) + return -ENOMEM; + + ret = pwrseq_qca_regulators_init(dev, pwrseq_qca, data); + if (ret) + return ret; + + if (data->has_wifi_en) { + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable = devm_gpiod_get(dev, "wifi-enable", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable)) { + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable), + "failed to acquire WIFI enable GPIO\n"); + } + } + + if (data->has_bt_en) { + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable = devm_gpiod_get(dev, "bt-enable", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable)) { + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable), + "failed to acquire BT enable GPIO\n"); + } + } + + pwrseq_qca->sw_ctrl = devm_gpiod_get_optional(dev, "swctrl", GPIOD_IN); + if (IS_ERR(pwrseq_qca->sw_ctrl)) { + return dev_err_probe(dev, PTR_ERR(pwrseq_qca->sw_ctrl), + "failed to acquire SW_CTRL gpio\n"); + } else if (!pwrseq_qca->sw_ctrl) + dev_info(dev, "No SW_CTRL gpio\n"); + + for (i = 0; i < PWRSEQ_QCA_MAX; i++) { + pwrseq_qca->pwrseq_qcas[i].common = pwrseq_qca; + + pwrseq = devm_pwrseq_create(dev, &pwrseq_qca_ops, &pwrseq_qca->pwrseq_qcas[i]); + if (IS_ERR(pwrseq)) + return PTR_ERR(pwrseq); + + onecell->pwrseqs[i] = pwrseq; + } + + onecell->num = PWRSEQ_QCA_MAX; + + provider = devm_of_pwrseq_provider_register(dev, of_pwrseq_xlate_onecell, onecell); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct qca_device_data qca_soc_data_qca6390 = { + .vddio = { "vddio", 20000 }, + .vregs = (struct qca_vreg []) { + /* 2.0 V */ + { "vddpcie2", 15000 }, + { "vddrfa3", 400000 }, + + /* 0.95 V */ + { "vddaon", 100000 }, + { "vddpmu", 1250000 }, + { "vddrfa1", 200000 }, + + /* 1.35 V */ + { "vddrfa2", 400000 }, + { "vddpcie1", 35000 }, + }, + .num_vregs = 7, + .has_bt_en = true, + .has_wifi_en = true, +}; + +/* Shared between wcn3990 and wcn3991 */ +static const struct qca_device_data qca_soc_data_wcn3990 = { + .vddio = { "vddio", 15000 }, + .vregs = (struct qca_vreg []) { + { "vddxo", 80000 }, + { "vddrfa", 300000 }, + { "vddch0", 450000 }, + { "vddch1", 450000 }, + }, + .num_vregs = 4, +}; + +static const struct qca_device_data qca_soc_data_wcn3998 = { + .vddio = { "vddio", 10000 }, + .vregs = (struct qca_vreg []) { + { "vddxo", 80000 }, + { "vddrfa", 300000 }, + { "vddch0", 450000 }, + { "vddch1", 450000 }, + }, + .num_vregs = 4, +}; + +static const struct qca_device_data qca_soc_data_wcn6750 = { + .vddio = { "vddio", 5000 }, + .vregs = (struct qca_vreg []) { + { "vddaon", 26000 }, + { "vddbtcxmx", 126000 }, + { "vddrfacmn", 12500 }, + { "vddrfa0p8", 102000 }, + { "vddrfa1p7", 302000 }, + { "vddrfa1p2", 257000 }, + { "vddrfa2p2", 1700000 }, + { "vddasd", 200 }, + }, + .num_vregs = 8, + .has_bt_en = true, + .has_wifi_en = true, +}; + +static const struct of_device_id pwrseq_qca_of_match[] = { + { .compatible = "qcom,qca6390-pwrseq", .data = &qca_soc_data_qca6390 }, + { .compatible = "qcom,wcn3990-pwrseq", .data = &qca_soc_data_wcn3990 }, + { .compatible = "qcom,wcn3991-pwrseq", .data = &qca_soc_data_wcn3990 }, + { .compatible = "qcom,wcn3998-pwrseq", .data = &qca_soc_data_wcn3998 }, + { .compatible = "qcom,wcn6750-pwrseq", .data = &qca_soc_data_wcn6750 }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, pwrseq_qca_of_match); + +static struct platform_driver pwrseq_qca_driver = { + .probe = pwrseq_qca_probe, + .driver = { + .name = "pwrseq_qca", + .of_match_table = pwrseq_qca_of_match, + }, +}; + +module_platform_driver(pwrseq_qca_driver); +MODULE_LICENSE("GPL v2");
Add support for power sequencer used in the Qualcomm BT+WiFi SoCs. They require several external volate regulators and some of them use separate BT and WiFi enable GPIO pins. This code is mostly extracted from the hci_qca.c bluetooth driver and ath10k WiFi driver. Instead of having each of them manage pins, different requirements, regulator types, move this knowledge to the common power sequencer driver. Currently original drivers are not stripped from the regulator code, this will be done later (to keep compatibility with the old device trees). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/power/pwrseq/Kconfig | 14 ++ drivers/power/pwrseq/Makefile | 1 + drivers/power/pwrseq/pwrseq_qca.c | 290 ++++++++++++++++++++++++++++++ 3 files changed, 305 insertions(+) create mode 100644 drivers/power/pwrseq/pwrseq_qca.c