@@ -1590,7 +1590,6 @@ static int qca_power_on(struct hci_dev *hdev)
struct qca_serdev *qcadev;
struct qca_data *qca = hu->priv;
int ret;
- bool sw_ctrl_state;
/* Non-serdev device usually is powered by external power
* and don't need additional action in driver for power on
@@ -1602,29 +1601,15 @@ static int qca_power_on(struct hci_dev *hdev)
* off the voltage regulator.
*/
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (!qcadev->vregs_on) {
- serdev_device_close(hu->serdev);
- ret = qca_regulator_enable(qcadev);
- if (ret)
- return ret;
-
- ret = serdev_device_open(hu->serdev);
- if (ret) {
- bt_dev_err(hu->hdev, "failed to open port");
- return ret;
- }
- }
+ serdev_device_close(hu->serdev);
+ ret = qca_regulator_enable(qcadev);
+ if (ret)
+ return ret;
- /* For wcn6750 need to enable gpio bt_en */
- if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
- msleep(50);
- gpiod_set_value_cansleep(qcadev->bt_en, 1);
- msleep(150);
- if (qcadev->sw_ctrl) {
- sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
- bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
- }
+ ret = serdev_device_open(hu->serdev);
+ if (ret) {
+ bt_dev_err(hu->hdev, "failed to open port");
+ return ret;
}
if (qca_is_wcn399x(soc_type)) {
@@ -1856,7 +1841,6 @@ static void qca_power_shutdown(struct hci_uart *hu)
struct qca_data *qca = hu->priv;
unsigned long flags;
enum qca_btsoc_type soc_type = qca_soc_type(hu);
- bool sw_ctrl_state;
/* From this point we go into power off state. But serial port is
* still open, stop queueing the IBS data and flush all the buffered
@@ -1878,18 +1862,8 @@ static void qca_power_shutdown(struct hci_uart *hu)
if (qca_is_wcn399x(soc_type)) {
host_set_baudrate(hu, 2400);
qca_send_power_pulse(hu, false);
- qca_regulator_disable(qcadev);
- } else if (soc_type == QCA_WCN6750) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
- msleep(100);
- qca_regulator_disable(qcadev);
- if (qcadev->sw_ctrl) {
- sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
- bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
- }
- } else if (qcadev->bt_en) {
- gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
+ qca_regulator_disable(qcadev);
set_bit(QCA_BT_OFF, &qca->flags);
}
@@ -1919,20 +1893,39 @@ static int qca_regulator_enable(struct qca_serdev *qcadev)
int ret;
/* Already enabled */
- if (qcadev->vregs_on)
- return 0;
+ if (!qcadev->vregs_on) {
+ BT_DBG("enabling %d regulators)", qcadev->num_vregs);
- BT_DBG("enabling %d regulators)", qcadev->num_vregs);
+ ret = regulator_bulk_enable(qcadev->num_vregs, qcadev->vreg_bulk);
+ if (ret)
+ return ret;
- ret = regulator_bulk_enable(qcadev->num_vregs, qcadev->vreg_bulk);
- if (ret)
- return ret;
+ qcadev->vregs_on = true;
- qcadev->vregs_on = true;
+ if (qca_is_wcn399x(qcadev->btsoc_type) ||
+ qca_is_wcn6750(qcadev->btsoc_type)) {
+ ret = clk_prepare_enable(qcadev->susclk);
+ if (ret) {
+ regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk);
+ return ret;
+ }
+ }
+ }
- ret = clk_prepare_enable(qcadev->susclk);
- if (ret)
- qca_regulator_disable(qcadev);
+ /* For wcn6750 need to enable gpio bt_en */
+ if (qcadev->bt_en) {
+ gpiod_set_value_cansleep(qcadev->bt_en, 0);
+ msleep(50);
+ gpiod_set_value_cansleep(qcadev->bt_en, 1);
+ msleep(150);
+ }
+
+ if (qcadev->sw_ctrl) {
+ bool sw_ctrl_state;
+
+ sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
+ bt_dev_dbg(qcadev->serdev_hu.hdev, "SW_CTRL is %d", sw_ctrl_state);
+ }
return ret;
}
@@ -1942,14 +1935,27 @@ static void qca_regulator_disable(struct qca_serdev *qcadev)
if (!qcadev)
return;
+ if (qcadev->bt_en) {
+ gpiod_set_value_cansleep(qcadev->bt_en, 0);
+ msleep(100);
+ }
+
/* Already disabled? */
- if (!qcadev->vregs_on)
- return;
+ if (qcadev->vregs_on) {
+ regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk);
+ qcadev->vregs_on = false;
- regulator_bulk_disable(qcadev->num_vregs, qcadev->vreg_bulk);
- qcadev->vregs_on = false;
+ if (qca_is_wcn399x(qcadev->btsoc_type) ||
+ qca_is_wcn6750(qcadev->btsoc_type))
+ clk_disable_unprepare(qcadev->susclk);
+ }
+
+ if (qcadev->sw_ctrl) {
+ bool sw_ctrl_state;
- clk_disable_unprepare(qcadev->susclk);
+ sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
+ bt_dev_dbg(qcadev->serdev_hu.hdev, "SW_CTRL is %d", sw_ctrl_state);
+ }
}
static int qca_init_regulators(struct qca_serdev *qcadev, struct device *dev,
@@ -2018,17 +2024,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
}
qcadev->vregs_on = false;
- }
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en) {
- if (qca_is_wcn6750(data->soc_type)) {
- dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
- power_ctrl_enabled = false;
- } else if (!qca_is_wcn399x(data->soc_type)) {
- dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
- power_ctrl_enabled = false;
+ qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+ GPIOD_OUT_LOW);
+ if (!qcadev->bt_en) {
+ if (qca_is_wcn6750(data->soc_type)) {
+ dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
+ power_ctrl_enabled = false;
+ } else if (!qca_is_wcn399x(data->soc_type)) {
+ dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
+ power_ctrl_enabled = false;
+ }
}
}
Further rework of power on/off handling. Move bt_en and sw_ctl handling close to regulator enable/disable, so that this code can be easily extended with pwrseq support. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/bluetooth/hci_qca.c | 126 +++++++++++++++++++----------------- 1 file changed, 66 insertions(+), 60 deletions(-)