diff mbox

[7/7] arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes

Message ID 1433409546-23995-8-git-send-email-ivan.ivanov@linaro.org
State Accepted
Commit 9943230c8860178a6f6409f0ba19167c0a46a71b
Headers show

Commit Message

Ivan T. Ivanov June 4, 2015, 9:19 a.m. UTC 
APQ8016 SBC board have 6 user controllable LED's.

Add following devices:

LED1 green LED triggered by system heartbeat.
LED2 green LED triggered by access to eMMC device.
LED3 green LED triggered by access to SD card.
LED4 green LED no trigger assigned.
LED5 yellow LED triggered by access to WLAN.
LED6 blue LED triggered by access to Bluetooth.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
---
 .../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 19 ++++++++
 arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi | 11 ++---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          | 51 ++++++++++++++++++++++
 3 files changed, 73 insertions(+), 8 deletions(-)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index b568c49..e03c11d 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -18,4 +18,23 @@ 
 			input-disable;
 		};
 	};
+
+	pm8916_gpios_leds: pm8916_gpios_leds {
+		pinconf {
+			pins = "gpio1", "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+	};
+};
+
+&pm8916_mpps {
+
+	pm8916_mpps_leds: pm8916_mpps_leds {
+		pinconf {
+			pins = "mpp2", "mpp3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
index 27087cf..cbeee0b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -3,14 +3,9 @@ 

 &msmgpio {

-	soc_gpios_default: default {
-		usr_led_1_ctrl_default: usr_led_1_ctrl_default {
-			pins = "gpio21";
-			function = "gpio";
-			output-low;
-		};
-		usr_led_2_ctrl_default: usr_led_2_ctrl_default {
-			pins = "gpio120";
+	msmgpio_leds: msmgpio_leds {
+		pinconf {
+			pins = "gpio21", "gpio120";
 			function = "gpio";
 			output-low;
 		};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 98abece..66804ff 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -32,5 +32,56 @@ 
 			pinctrl-0 = <&blsp1_uart2_default>;
 			pinctrl-1 = <&blsp1_uart2_sleep>;
 		};
+
+		leds {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msmgpio_leds>,
+				    <&pm8916_gpios_leds>,
+				    <&pm8916_mpps_leds>;
+
+			compatible = "gpio-leds";
+
+			led@1 {
+				label = "apq8016-sbc:green:user1";
+				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			led@2 {
+				label = "apq8016-sbc:green:user2";
+				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+
+			led@3 {
+				label = "apq8016-sbc:green:user3";
+				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "mmc1";
+				default-state = "off";
+			};
+
+			led@4 {
+				label = "apq8016-sbc:green:user4";
+				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "none";
+				default-state = "off";
+			};
+
+			led@5 {
+				label = "apq8016-sbc:yellow:wlan";
+				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "wlan";
+				default-state = "off";
+			};
+
+			led@6 {
+				label = "apq8016-sbc:blue:bt";
+				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "bt";
+				default-state = "off";
+			};
+		};
 	};
 };