diff mbox series

[5.13,125/175] serial: 8250_mtk: fix uart corruption issue when rx power off

Message ID 20210810173005.073513908@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Aug. 10, 2021, 5:30 p.m. UTC
From: Zhiyong Tao <zhiyong.tao@mediatek.com>

commit 7c4a509d3815a260c423c0633bd73695250ac26d upstream.

Fix uart corruption issue when rx power off.
Add spin lock in mtk8250_dma_rx_complete function in APDMA mode.

when uart is used as a communication port with external device(GPS).
when external device(GPS) power off, the power of rx pin is also from
1.8v to 0v. Even if there is not any data in rx. But uart rx pin can
capture the data "0".
If uart don't receive any data in specified cycle, uart will generates
BI(Break interrupt) interrupt.
If external device(GPS) power off, we found that BI interrupt appeared
continuously and very frequently.
When uart interrupt type is BI, uart IRQ handler(8250 framwork
API:serial8250_handle_irq) will push data to tty buffer.
mtk8250_dma_rx_complete is a task of mtk_uart_apdma_rx_handler.
mtk8250_dma_rx_complete priority is lower than uart irq
handler(serial8250_handle_irq).
if we are in process of mtk8250_dma_rx_complete, uart appear BI
interrupt:1)serial8250_handle_irq will priority execution.2)it may cause
write tty buffer conflict in mtk8250_dma_rx_complete.
So the spin lock protect the rx receive data process is not break.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210729084640.17613-2-zhiyong.tao@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_mtk.c |    5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -93,10 +93,13 @@  static void mtk8250_dma_rx_complete(void
 	struct dma_tx_state state;
 	int copied, total, cnt;
 	unsigned char *ptr;
+	unsigned long flags;
 
 	if (data->rx_status == DMA_RX_SHUTDOWN)
 		return;
 
+	spin_lock_irqsave(&up->port.lock, flags);
+
 	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
 	total = dma->rx_size - state.residue;
 	cnt = total;
@@ -120,6 +123,8 @@  static void mtk8250_dma_rx_complete(void
 	tty_flip_buffer_push(tty_port);
 
 	mtk8250_rx_dma(up);
+
+	spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
 static void mtk8250_rx_dma(struct uart_8250_port *up)