diff mbox series

[net-next,v2,2/2] bonding: combine netlink and console error messages

Message ID f39027d1a23fb744212bd502d426a44512be4897.1628576943.git.jtoppins@redhat.com
State Superseded
Headers show
Series None | expand

Commit Message

Jonathan Toppins Aug. 10, 2021, 6:40 a.m. UTC 
There seems to be no reason to have different error messages between
netlink and printk. It also cleans up the function slightly.

v2:
 - changed the printks to reduce object code slightly
 - emit a single error message based on if netlink or sysfs is
   attempting to enslave

Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
---
 drivers/net/bonding/bond_main.c | 49 +++++++++++++++++++--------------
 1 file changed, 29 insertions(+), 20 deletions(-)

Comments

Leon Romanovsky Aug. 10, 2021, 6:47 a.m. UTC | #1 
On Tue, Aug 10, 2021 at 02:40:31AM -0400, Jonathan Toppins wrote:
> There seems to be no reason to have different error messages between
> netlink and printk. It also cleans up the function slightly.
> 
> v2:
>  - changed the printks to reduce object code slightly
>  - emit a single error message based on if netlink or sysfs is
>    attempting to enslave
> 
> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
> ---
>  drivers/net/bonding/bond_main.c | 49 +++++++++++++++++++--------------
>  1 file changed, 29 insertions(+), 20 deletions(-)

Can you please resubmit whole series and not as a reply and put your changelog under ---?
We don't want to see chengelog in final commit message.

Thanks
diff mbox series

Patch

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3ba5f4871162..eaa82a668c8e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1712,6 +1712,20 @@  void bond_lower_state_changed(struct slave *slave)
 	netdev_lower_state_changed(slave->dev, &info);
 }
 
+#define BOND_NL_ERR(bond_dev, extack, errmsg) do {		\
+	if (extack)						\
+		NL_SET_ERR_MSG(extack, errmsg);			\
+	else							\
+		netdev_err(bond_dev, "Error: %s\n", errmsg);	\
+} while (0)
+
+#define SLAVE_NL_ERR(bond_dev, slave_dev, extack, errmsg) do {		\
+	if (extack)							\
+		NL_SET_ERR_MSG(extack, errmsg);				\
+	else								\
+		slave_err(bond_dev, slave_dev, "Error: %s\n", errmsg);	\
+} while (0)
+
 /* enslave device <slave> to bond device <master> */
 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 		 struct netlink_ext_ack *extack)
@@ -1725,9 +1739,8 @@  int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 
 	if (slave_dev->flags & IFF_MASTER &&
 	    !netif_is_bond_master(slave_dev)) {
-		NL_SET_ERR_MSG(extack, "Device with IFF_MASTER cannot be enslaved");
-		netdev_err(bond_dev,
-			   "Error: Device with IFF_MASTER cannot be enslaved\n");
+		BOND_NL_ERR(bond_dev, extack,
+			    "Device with IFF_MASTER cannot be enslaved");
 		return -EPERM;
 	}
 
@@ -1739,15 +1752,13 @@  int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 
 	/* already in-use? */
 	if (netdev_is_rx_handler_busy(slave_dev)) {
-		NL_SET_ERR_MSG(extack, "Device is in use and cannot be enslaved");
-		slave_err(bond_dev, slave_dev,
-			  "Error: Device is in use and cannot be enslaved\n");
+		SLAVE_NL_ERR(bond_dev, slave_dev, extack,
+			     "Device is in use and cannot be enslaved");
 		return -EBUSY;
 	}
 
 	if (bond_dev == slave_dev) {
-		NL_SET_ERR_MSG(extack, "Cannot enslave bond to itself.");
-		netdev_err(bond_dev, "cannot enslave bond to itself.\n");
+		BOND_NL_ERR(bond_dev, extack, "Cannot enslave bond to itself.");
 		return -EPERM;
 	}
 
@@ -1756,8 +1767,8 @@  int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 	if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
 		slave_dbg(bond_dev, slave_dev, "is NETIF_F_VLAN_CHALLENGED\n");
 		if (vlan_uses_dev(bond_dev)) {
-			NL_SET_ERR_MSG(extack, "Can not enslave VLAN challenged device to VLAN enabled bond");
-			slave_err(bond_dev, slave_dev, "Error: cannot enslave VLAN challenged slave on VLAN enabled bond\n");
+			SLAVE_NL_ERR(bond_dev, slave_dev, extack,
+				     "Can not enslave VLAN challenged device to VLAN enabled bond");
 			return -EPERM;
 		} else {
 			slave_warn(bond_dev, slave_dev, "enslaved VLAN challenged slave. Adding VLANs will be blocked as long as it is part of bond.\n");
@@ -1775,8 +1786,8 @@  int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 	 * enslaving it; the old ifenslave will not.
 	 */
 	if (slave_dev->flags & IFF_UP) {
-		NL_SET_ERR_MSG(extack, "Device can not be enslaved while up");
-		slave_err(bond_dev, slave_dev, "slave is up - this may be due to an out of date ifenslave\n");
+		SLAVE_NL_ERR(bond_dev, slave_dev, extack,
+			     "Device can not be enslaved while up");
 		return -EPERM;
 	}
 
@@ -1815,17 +1826,15 @@  int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 						 bond_dev);
 		}
 	} else if (bond_dev->type != slave_dev->type) {
-		NL_SET_ERR_MSG(extack, "Device type is different from other slaves");
-		slave_err(bond_dev, slave_dev, "ether type (%d) is different from other slaves (%d), can not enslave it\n",
-			  slave_dev->type, bond_dev->type);
+		SLAVE_NL_ERR(bond_dev, slave_dev, extack,
+			     "Device type is different from other slaves");
 		return -EINVAL;
 	}
 
 	if (slave_dev->type == ARPHRD_INFINIBAND &&
 	    BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
-		NL_SET_ERR_MSG(extack, "Only active-backup mode is supported for infiniband slaves");
-		slave_warn(bond_dev, slave_dev, "Type (%d) supports only active-backup mode\n",
-			   slave_dev->type);
+		SLAVE_NL_ERR(bond_dev, slave_dev, extack,
+			     "Only active-backup mode is supported for infiniband slaves");
 		res = -EOPNOTSUPP;
 		goto err_undo_flags;
 	}
@@ -1839,8 +1848,8 @@  int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 				bond->params.fail_over_mac = BOND_FOM_ACTIVE;
 				slave_warn(bond_dev, slave_dev, "Setting fail_over_mac to active for active-backup mode\n");
 			} else {
-				NL_SET_ERR_MSG(extack, "Slave device does not support setting the MAC address, but fail_over_mac is not set to active");
-				slave_err(bond_dev, slave_dev, "The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active\n");
+				SLAVE_NL_ERR(bond_dev, slave_dev, extack,
+					     "Slave device does not support setting the MAC address, but fail_over_mac is not set to active");
 				res = -EOPNOTSUPP;
 				goto err_undo_flags;
 			}