diff mbox series

[v2] arm64: dts: qcom: sc7280: Add WPSS remoteproc node

Message ID 1628619089-12502-1-git-send-email-pillair@codeaurora.org
State New
Headers show
Series [v2] arm64: dts: qcom: sc7280: Add WPSS remoteproc node | expand

Commit Message

Rakesh Pillai Aug. 10, 2021, 6:11 p.m. UTC
Add the WPSS remoteproc node in dts for
PIL loading.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts |  4 +++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 57 +++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)

Comments

Rakesh Pillai Sept. 9, 2021, 8:38 a.m. UTC | #1
> -----Original Message-----

> From: Stephen Boyd <swboyd@chromium.org>

> Sent: Wednesday, August 11, 2021 1:22 AM

> To: Rakesh Pillai <pillair@codeaurora.org>; agross@kernel.org;

> bjorn.andersson@linaro.org; robh+dt@kernel.org

> Cc: linux-arm-msm@vger.kernel.org; devicetree@vger.kernel.org; linux-

> kernel@vger.kernel.org; sibis@codeaurora.org; mpubbise@codeaurora.org

> Subject: Re: [PATCH v2] arm64: dts: qcom: sc7280: Add WPSS remoteproc

> node

> 

> Quoting Rakesh Pillai (2021-08-10 11:11:29)

> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi

> > b/arch/arm64/boot/dts/qcom/sc7280.dtsi

> > index 53a21d0..41a7826 100644

> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi

> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi

> > @@ -74,6 +74,16 @@

> >                         reg = <0 0x8b700000 0 0x10000>;

> >                         no-map;

> >                 };

> > +

> > +               wlan_fw_mem: memory@80c00000 {

> > +                       no-map;

> > +                       reg = <0x0 0x80c00000 0x0 0xc00000>;

> > +               };

> 

> Please try to keep this sorted by reg address. 80c00000 comes before

> 8b700000.

> 


Hi Stephen,
I will fix this and send v3 for this patch.


> > +

> > +               wpss_mem: memory@9ae00000 {

> > +                       no-map;

> > +                       reg = <0x0 0x9ae00000 0x0 0x1900000>;

> > +               };

> >         };

> >

> >         cpus {

> > @@ -1270,6 +1280,53 @@

> >                         };

> >                 };

> >

> > +               remoteproc_wpss: remoteproc@8a00000 {

> > +                       compatible = "qcom,sc7280-wpss-pil";

> > +                       reg = <0 0x08a00000 0 0x10000>;

> > +

> > +                       interrupts-extended = <&intc GIC_SPI 587

> IRQ_TYPE_EDGE_RISING>,

> > +                                             <&wpss_smp2p_in 0 IRQ_TYPE_NONE>,

> > +                                             <&wpss_smp2p_in 1 IRQ_TYPE_NONE>,

> > +                                             <&wpss_smp2p_in 2 IRQ_TYPE_NONE>,

> > +                                             <&wpss_smp2p_in 3 IRQ_TYPE_NONE>,

> > +                                             <&wpss_smp2p_in 7

> > + IRQ_TYPE_NONE>;

> 

> Is this IRQ_TYPE_EDGE_RISING? Please add some type of edge or level flag.


I will change it to IRQ_TYPE_EDGE_RISING and send out the next revision.

> 

> > +                       interrupt-names = "wdog", "fatal", "ready", "handover",

> > +                                         "stop-ack", "shutdown-ack";

> > +

> > +                       clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,

> > +                                <&gcc GCC_WPSS_AHB_CLK>,

> > +                                <&gcc GCC_WPSS_RSCP_CLK>,

> > +                                <&rpmhcc RPMH_CXO_CLK>;

> > +                       clock-names = "gcc_wpss_ahb_bdg_mst_clk",

> > +                                     "gcc_wpss_ahb_clk",

> > +                                     "gcc_wpss_rscp_clk",

> > +                                     "xo";

> > +

> > +                       memory-region = <&wpss_mem>;

> > +

> > +                       qcom,smem-states = <&wpss_smp2p_out 0>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22a..2b8bbcd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -68,3 +68,7 @@ 
 		qcom,pre-scaling = <1 1>;
 	};
 };
+
+&remoteproc_wpss {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 53a21d0..41a7826 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -74,6 +74,16 @@ 
 			reg = <0 0x8b700000 0 0x10000>;
 			no-map;
 		};
+
+		wlan_fw_mem: memory@80c00000 {
+			no-map;
+			reg = <0x0 0x80c00000 0x0 0xc00000>;
+		};
+
+		wpss_mem: memory@9ae00000 {
+			no-map;
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+		};
 	};
 
 	cpus {
@@ -1270,6 +1280,53 @@ 
 			};
 		};
 
+		remoteproc_wpss: remoteproc@8a00000 {
+			compatible = "qcom,sc7280-wpss-pil";
+			reg = <0 0x08a00000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 0 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 1 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 2 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 3 IRQ_TYPE_NONE>,
+					      <&wpss_smp2p_in 7 IRQ_TYPE_NONE>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+				 <&gcc GCC_WPSS_AHB_CLK>,
+				 <&gcc GCC_WPSS_RSCP_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "gcc_wpss_ahb_bdg_mst_clk",
+				      "gcc_wpss_ahb_clk",
+				      "gcc_wpss_rscp_clk",
+				      "xo";
+
+			memory-region = <&wpss_mem>;
+
+			qcom,smem-states = <&wpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+			reset-names = "restart", "pdc_sync";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x37000>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_WPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "wpss";
+				qcom,remote-pid = <13>;
+			};
+		};
+
 		usb_2: usb@8cf8800 {
 			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
 			reg = <0 0x08cf8800 0 0x400>;