diff mbox series

[v2,2/2] drm/panel: Add support for Sharp LS060T1SX01 panel

Message ID 20210809184712.203791-3-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series Add support for Sharp LS060T1SX01 panel | expand

Commit Message

Dmitry Baryshkov Aug. 9, 2021, 6:47 p.m. UTC
Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
nt35695 driver IC. For example this LCD module can be found in the
kwaek.ca Dragonboard Display Adapter Bundle.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

---
 drivers/gpu/drm/panel/Kconfig                 |  10 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-sharp-ls060t1sx01.c   | 274 ++++++++++++++++++
 3 files changed, 285 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c

-- 
2.30.2
diff mbox series

Patch

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 4894913936e9..08f85a5ff738 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -451,6 +451,16 @@  config DRM_PANEL_SHARP_LS043T1LE01
 	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
 	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
 
+config DRM_PANEL_SHARP_LS060T1SX01
+	tristate "Sharp LS060T1SX01 FullHD video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
+	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
+	  Bundle.
+
 config DRM_PANEL_SITRONIX_ST7701
 	tristate "Sitronix ST7701 panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index cae4d976c069..7dd6bd755e13 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -47,6 +47,7 @@  obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
diff --git a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
new file mode 100644
index 000000000000..4fece00e6156
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
@@ -0,0 +1,274 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2021 Linaro Ltd.
+// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+//   Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct sharp_ls060 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+	bool prepared;
+};
+
+static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel)
+{
+	return container_of(panel, struct sharp_ls060, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, seq...) ({				\
+		static const u8 d[] = { seq };				\
+									\
+		mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
+	})
+
+static void sharp_ls060_reset(struct sharp_ls060 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int sharp_ls060_on(struct sharp_ls060 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
+	if (ret < 0) {
+		dev_err(dev, "Failed to send command: %d\n", ret);
+		return ret;
+	}
+
+	ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
+	if (ret < 0) {
+		dev_err(dev, "Failed to send command: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(120);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+	msleep(50);
+
+	return 0;
+}
+
+static int sharp_ls060_off(struct sharp_ls060 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	usleep_range(2000, 3000);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(121);
+
+	return 0;
+}
+
+static int sharp_ls060_prepare(struct drm_panel *panel)
+{
+	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = regulator_enable(ctx->supply);
+	if (ret < 0)
+		return ret;
+
+	sharp_ls060_reset(ctx);
+
+	ret = sharp_ls060_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		regulator_disable(ctx->supply);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	ctx->prepared = true;
+	return 0;
+}
+
+static int sharp_ls060_unprepare(struct drm_panel *panel)
+{
+	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = sharp_ls060_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	regulator_disable(ctx->supply);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	ctx->prepared = false;
+	return 0;
+}
+
+static const struct drm_display_mode sharp_ls060_mode = {
+	.clock = (1080 + 96 + 16 + 64) * (1920 + 4 + 1 + 16) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 96,
+	.hsync_end = 1080 + 96 + 16,
+	.htotal = 1080 + 96 + 16 + 64,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 4,
+	.vsync_end = 1920 + 4 + 1,
+	.vtotal = 1920 + 4 + 1 + 16,
+	.width_mm = 75,
+	.height_mm = 132,
+};
+
+static int sharp_ls060_get_modes(struct drm_panel *panel,
+				 struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &sharp_ls060_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs sharp_ls060_panel_funcs = {
+	.prepare = sharp_ls060_prepare,
+	.unprepare = sharp_ls060_unprepare,
+	.get_modes = sharp_ls060_get_modes,
+};
+
+static int sharp_ls060_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct sharp_ls060 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->supply = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(ctx->supply))
+		return PTR_ERR(ctx->supply);
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_EOT_PACKET |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &sharp_ls060_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sharp_ls060_remove(struct mipi_dsi_device *dsi)
+{
+	struct sharp_ls060 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id sharp_ls060t1sx01_of_match[] = {
+	{ .compatible = "sharp,ls060t1sx01" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sharp_ls060t1sx01_of_match);
+
+static struct mipi_dsi_driver sharp_ls060_driver = {
+	.probe = sharp_ls060_probe,
+	.remove = sharp_ls060_remove,
+	.driver = {
+		.name = "panel-sharp-ls060t1sx01",
+		.of_match_table = sharp_ls060t1sx01_of_match,
+	},
+};
+module_mipi_dsi_driver(sharp_ls060_driver);
+
+MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
+MODULE_DESCRIPTION("DRM driver for Sharp LS060T1SX01 1080p video mode dsi panel");
+MODULE_LICENSE("GPL v2");