new file mode 100644
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef _ASM_ARCH_CGC_H
+#define _ASM_ARCH_CGC_H
+
+enum cgc1_clk {
+ DUMMY0_CLK,
+ DUMMY1_CLK,
+ LPOSC,
+ XBAR_BUSCLK,
+ SOSC,
+ SOSC_DIV1,
+ SOSC_DIV2,
+ SOSC_DIV3,
+ FRO,
+ FRO_DIV1,
+ FRO_DIV2,
+ FRO_DIV3,
+ PLL2,
+ PLL3,
+ PLL3_VCODIV,
+ PLL3_PFD0,
+ PLL3_PFD1,
+ PLL3_PFD2,
+ PLL3_PFD3,
+ PLL3_PFD0_DIV1,
+ PLL3_PFD0_DIV2,
+ PLL3_PFD1_DIV1,
+ PLL3_PFD1_DIV2,
+ PLL3_PFD2_DIV1,
+ PLL3_PFD2_DIV2,
+ PLL3_PFD3_DIV1,
+ PLL3_PFD3_DIV2,
+};
+
+struct cgc1_regs {
+ u32 verid;
+ u32 rsvd1[4];
+ u32 ca35clk;
+ u32 rsvd2[2];
+ u32 clkoutcfg;
+ u32 rsvd3[4];
+ u32 nicclk;
+ u32 xbarclk;
+ u32 rsvd4[21];
+ u32 clkdivrst;
+ u32 rsvd5[29];
+ u32 soscdiv;
+ u32 rsvd6[63];
+ u32 frodiv;
+ u32 rsvd7[189];
+ u32 pll2csr;
+ u32 rsvd8[3];
+ u32 pll2cfg;
+ u32 rsvd9;
+ u32 pll2denom;
+ u32 pll2num;
+ u32 pll2ss;
+ u32 rsvd10[55];
+ u32 pll3csr;
+ u32 pll3div_vco;
+ u32 pll3div_pfd0;
+ u32 pll3div_pfd1;
+ u32 pll3cfg;
+ u32 pll3pfdcfg;
+ u32 pll3denom;
+ u32 pll3num;
+ u32 pll3ss;
+ u32 pll3lock;
+ u32 rsvd11[54];
+ u32 enetstamp;
+ u32 rsvd12[67];
+ u32 pllusbcfg;
+ u32 rsvd13[59];
+ u32 aud_clk1;
+ u32 sai5_4_clk;
+ u32 tpm6_7clk;
+ u32 mqs1clk;
+ u32 rsvd14[60];
+ u32 lvdscfg;
+};
+
+struct cgc2_regs {
+ u32 verid;
+ u32 rsvd1[4];
+ u32 hificlk;
+ u32 rsvd2[2];
+ u32 clkoutcfg;
+ u32 rsvd3[6];
+ u32 niclpavclk;
+ u32 ddrclk;
+ u32 rsvd4[19];
+ u32 clkdivrst;
+ u32 rsvd5[29];
+ u32 soscdiv;
+ u32 rsvd6[63];
+ u32 frodiv;
+ u32 rsvd7[253];
+ u32 pll4csr;
+ u32 pll4div_vco;
+ u32 pll4div_pfd0;
+ u32 pll4div_pfd1;
+ u32 pll4cfg;
+ u32 pll4pfdcfg;
+ u32 pll4denom;
+ u32 pll4num;
+ u32 pll4ss;
+ u32 pll4lock;
+ u32 rsvd8[128];
+ u32 aud_clk2;
+ u32 sai7_6_clk;
+ u32 tpm8clk;
+ u32 rsvd9[1];
+ u32 spdifclk;
+ u32 rsvd10[59];
+ u32 lvdscfg;
+};
+
+u32 cgc1_clk_get_rate(enum cgc1_clk clk);
+void cgc1_pll3_init(void);
+void cgc1_pll2_init(void);
+void cgc1_soscdiv_init(void);
+void cgc1_init_core_clk(void);
+void cgc2_pll4_init(void);
+void cgc2_ddrclk_config(u32 src, u32 div);
+u32 cgc1_sosc_div(enum cgc1_clk clk);
+#endif
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright 2020 NXP
+ * Copyright 2021 NXP
*/
#ifndef _ASM_ARCH_IMX8ULP_CLOCK_H
@@ -17,6 +17,7 @@ enum mxc_clock {
MXC_DDR_CLK,
MXC_ESDHC_CLK,
MXC_ESDHC2_CLK,
+ MXC_ESDHC3_CLK,
MXC_I2C_CLK,
};
@@ -26,9 +27,15 @@ u32 get_lpuart_clk(void);
int enable_i2c_clk(unsigned char enable, unsigned int i2c_num);
u32 imx_get_i2cclk(unsigned int i2c_num);
#endif
+void enable_usboh3_clk(unsigned char enable);
+int enable_usb_pll(ulong usb_phy_base);
#ifdef CONFIG_MXC_OCOTP
void enable_ocotp_clk(unsigned char enable);
#endif
void init_clk_usdhc(u32 index);
+void init_clk_fspi(int index);
+void init_clk_ddr(void);
+int set_ddr_clk(u32 phy_freq_mhz);
void clock_init(void);
+void cgc1_enet_stamp_sel(u32 clk_src);
#endif
@@ -7,6 +7,7 @@
#define _IMX8ULP_REGS_H_
#define ARCH_MXC
+#include <linux/bitops.h>
#include <linux/sizes.h>
#define PBRIDGE0_BASE 0x28000000
new file mode 100644
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef _ASM_ARCH_IMX8ULP_PCC_H
+#define _ASM_ARCH_IMX8ULP_PCC_H
+
+#include <asm/arch/cgc.h>
+
+enum pcc3_entry {
+ DMA1_MP_PCC3_SLOT = 1,
+ DMA1_CH0_PCC3_SLOT = 2,
+ DMA1_CH1_PCC3_SLOT = 3,
+ DMA1_CH2_PCC3_SLOT = 4,
+ DMA1_CH3_PCC3_SLOT = 5,
+ DMA1_CH4_PCC3_SLOT = 6,
+ DMA1_CH5_PCC3_SLOT = 7,
+ DMA1_CH6_PCC3_SLOT = 8,
+ DMA1_CH7_PCC3_SLOT = 9,
+ DMA1_CH8_PCC3_SLOT = 10,
+ DMA1_CH9_PCC3_SLOT = 11,
+ DMA1_CH10_PCC3_SLOT = 12,
+ DMA1_CH11_PCC3_SLOT = 13,
+ DMA1_CH12_PCC3_SLOT = 14,
+ DMA1_CH13_PCC3_SLOT = 15,
+ DMA1_CH14_PCC3_SLOT = 16,
+ DMA1_CH15_PCC3_SLOT = 17,
+ DMA1_CH16_PCC3_SLOT = 18,
+ DMA1_CH17_PCC3_SLOT = 19,
+ DMA1_CH18_PCC3_SLOT = 20,
+ DMA1_CH19_PCC3_SLOT = 21,
+ DMA1_CH20_PCC3_SLOT = 22,
+ DMA1_CH21_PCC3_SLOT = 23,
+ DMA1_CH22_PCC3_SLOT = 24,
+ DMA1_CH23_PCC3_SLOT = 25,
+ DMA1_CH24_PCC3_SLOT = 26,
+ DMA1_CH25_PCC3_SLOT = 27,
+ DMA1_CH26_PCC3_SLOT = 28,
+ DMA1_CH27_PCC3_SLOT = 29,
+ DMA1_CH28_PCC3_SLOT = 30,
+ DMA1_CH29_PCC3_SLOT = 31,
+ DMA1_CH30_PCC3_SLOT = 32,
+ DMA1_CH31_PCC3_SLOT = 33,
+ MU0_B_PCC3_SLOT = 34,
+ MU3_A_PCC3_SLOT = 35,
+ LLWU1_PCC3_SLOT = 38,
+ UPOWER_PCC3_SLOT = 40,
+ WDOG3_PCC3_SLOT = 42,
+ WDOG4_PCC3_SLOT = 43,
+ XRDC_MGR_PCC3_SLOT = 47,
+ SEMA42_1_PCC3_SLOT = 48,
+ ROMCP1_PCC3_SLOT = 49,
+ LPIT1_PCC3_SLOT = 50,
+ TPM4_PCC3_SLOT = 51,
+ TPM5_PCC3_SLOT = 52,
+ FLEXIO1_PCC3_SLOT = 53,
+ I3C2_PCC3_SLOT = 54,
+ LPI2C4_PCC3_SLOT = 55,
+ LPI2C5_PCC3_SLOT = 56,
+ LPUART4_PCC3_SLOT = 57,
+ LPUART5_PCC3_SLOT = 58,
+ LPSPI4_PCC3_SLOT = 59,
+ LPSPI5_PCC3_SLOT = 60,
+};
+
+enum pcc4_entry {
+ FLEXSPI2_PCC4_SLOT = 1,
+ TPM6_PCC4_SLOT = 2,
+ TPM7_PCC4_SLOT = 3,
+ LPI2C6_PCC4_SLOT = 4,
+ LPI2C7_PCC4_SLOT = 5,
+ LPUART6_PCC4_SLOT = 6,
+ LPUART7_PCC4_SLOT = 7,
+ SAI4_PCC4_SLOT = 8,
+ SAI5_PCC4_SLOT = 9,
+ PCTLE_PCC4_SLOT = 10,
+ PCTLF_PCC4_SLOT = 11,
+ SDHC0_PCC4_SLOT = 13,
+ SDHC1_PCC4_SLOT = 14,
+ SDHC2_PCC4_SLOT = 15,
+ USB0_PCC4_SLOT = 16,
+ USBPHY_PCC4_SLOT = 17,
+ USB1_PCC4_SLOT = 18,
+ USB1PHY_PCC4_SLOT = 19,
+ USB_XBAR_PCC4_SLOT = 20,
+ ENET_PCC4_SLOT = 21,
+ SFA1_PCC4_SLOT = 22,
+ RGPIOE_PCC4_SLOT = 30,
+ RGPIOF_PCC4_SLOT = 31,
+};
+
+/* PCC registers */
+#define PCC_PR_OFFSET 31
+#define PCC_PR_MASK (0x1 << PCC_PR_OFFSET)
+#define PCC_CGC_OFFSET 30
+#define PCC_CGC_MASK (0x1 << PCC_CGC_OFFSET)
+#define PCC_INUSE_OFFSET 29
+#define PCC_INUSE_MASK (0x1 << PCC_INUSE_OFFSET)
+#define PCC_PCS_OFFSET 24
+#define PCC_PCS_MASK (0x7 << PCC_PCS_OFFSET)
+#define PCC_FRAC_OFFSET 3
+#define PCC_FRAC_MASK (0x1 << PCC_FRAC_OFFSET)
+#define PCC_PCD_OFFSET 0
+#define PCC_PCD_MASK (0x7 << PCC_PCD_OFFSET)
+
+enum pcc_clksrc_type {
+ CLKSRC_PER_PLAT = 0,
+ CLKSRC_PER_BUS = 1,
+ CLKSRC_NO_PCS = 2,
+};
+
+enum pcc_div_type {
+ PCC_HAS_DIV,
+ PCC_NO_DIV,
+};
+
+enum pcc_rst_b {
+ PCC_HAS_RST_B,
+ PCC_NO_RST_B,
+};
+
+/* This structure keeps info for each pcc slot */
+struct pcc_entry {
+ u32 pcc_base;
+ u32 pcc_slot;
+ enum pcc_clksrc_type clksrc;
+ enum pcc_div_type div;
+ enum pcc_rst_b rst_b;
+};
+
+int pcc_clock_enable(int pcc_controller, int pcc_clk_slot, bool enable);
+int pcc_clock_sel(int pcc_controller, int pcc_clk_slot, enum cgc1_clk src);
+int pcc_clock_div_config(int pcc_controller, int pcc_clk_slot, bool frac, u8 div);
+bool pcc_clock_is_enable(int pcc_controller, int pcc_clk_slot);
+int pcc_clock_get_clksrc(int pcc_controller, int pcc_clk_slot, enum cgc1_clk *src);
+int pcc_reset_peripheral(int pcc_controller, int pcc_clk_slot, bool reset);
+u32 pcc_clock_get_rate(int pcc_controller, int pcc_clk_slot);
+#endif
@@ -4,4 +4,4 @@
#
obj-y += lowlevel_init.o
-obj-y += soc.o clock.o iomux.o
+obj-y += soc.o clock.o iomux.o pcc.o cgc.o
new file mode 100644
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/cgc.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct cgc1_regs *cgc1_regs = (struct cgc1_regs *)0x292C0000UL;
+static struct cgc2_regs *cgc2_regs = (struct cgc2_regs *)0x2da60000UL;
+
+void cgc1_soscdiv_init(void)
+{
+ /* Configure SOSC/FRO DIV1 ~ DIV3 */
+ clrbits_le32(&cgc1_regs->soscdiv, BIT(7));
+ clrbits_le32(&cgc1_regs->soscdiv, BIT(15));
+ clrbits_le32(&cgc1_regs->soscdiv, BIT(23));
+ clrbits_le32(&cgc1_regs->soscdiv, BIT(31));
+
+ clrbits_le32(&cgc1_regs->frodiv, BIT(7));
+}
+
+void cgc1_pll2_init(void)
+{
+ u32 reg;
+
+ if (readl(&cgc1_regs->pll2csr) & BIT(23))
+ clrbits_le32(&cgc1_regs->pll2csr, BIT(23));
+
+ /* Disable PLL2 */
+ clrbits_le32(&cgc1_regs->pll2csr, BIT(0));
+ mdelay(1);
+
+ /* wait valid bit false */
+ while ((readl(&cgc1_regs->pll2csr) & BIT(24)))
+ ;
+
+ /* Select SOSC as source, freq = 31 * 24 =744mhz */
+ reg = 31 << 16;
+ writel(reg, &cgc1_regs->pll2cfg);
+
+ /* Enable PLL2 */
+ setbits_le32(&cgc1_regs->pll2csr, BIT(0));
+
+ /* Wait for PLL2 clock ready */
+ while (!(readl(&cgc1_regs->pll2csr) & BIT(24)))
+ ;
+}
+
+static void cgc1_set_a35_clk(u32 clk_src, u32 div_core)
+{
+ u32 reg;
+
+ /* ulock */
+ if (readl(&cgc1_regs->ca35clk) & BIT(31))
+ clrbits_le32(&cgc1_regs->ca35clk, BIT(31));
+
+ reg = readl(&cgc1_regs->ca35clk);
+ reg &= ~GENMASK(29, 21);
+ reg |= ((clk_src & 0x3) << 28);
+ reg |= (((div_core - 1) & 0x3f) << 21);
+ writel(reg, &cgc1_regs->ca35clk);
+
+ while (!(readl(&cgc1_regs->ca35clk) & BIT(27)))
+ ;
+}
+
+void cgc1_init_core_clk(void)
+{
+ u32 reg = readl(&cgc1_regs->ca35clk);
+
+ /* if already selected to PLL2, switch to FRO firstly */
+ if (((reg >> 28) & 0x3) == 0x1)
+ cgc1_set_a35_clk(0, 1);
+
+ /* Set pll2 to 750Mhz for 1V */
+ cgc1_pll2_init();
+
+ /* Set A35 clock to pll2 */
+ cgc1_set_a35_clk(1, 1);
+}
+
+void cgc1_enet_stamp_sel(u32 clk_src)
+{
+ writel((clk_src & 0x7) << 24, &cgc1_regs->enetstamp);
+}
+
+void cgc1_pll3_init(void)
+{
+ /* Gate off VCO */
+ setbits_le32(&cgc1_regs->pll3div_vco, BIT(7));
+
+ /* Disable PLL3 */
+ clrbits_le32(&cgc1_regs->pll3csr, BIT(0));
+
+ /* Gate off PFDxDIV */
+ setbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+ setbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+
+ /* Gate off PFDx */
+ setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7));
+ setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15));
+ setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23));
+ setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31));
+
+ /* Select SOSC as source */
+ clrbits_le32(&cgc1_regs->pll3cfg, BIT(0));
+
+ //setbits_le32(&cgc1_regs->pll3cfg, 22 << 16);
+ writel(22 << 16, &cgc1_regs->pll3cfg);
+
+ writel(578, &cgc1_regs->pll3num);
+ writel(1000, &cgc1_regs->pll3denom);
+
+ /* Enable PLL3 */
+ setbits_le32(&cgc1_regs->pll3csr, BIT(0));
+
+ /* Wait for PLL3 clock ready */
+ while (!(readl(&cgc1_regs->pll3csr) & BIT(24)))
+ ;
+ /* Gate on VCO */
+ clrbits_le32(&cgc1_regs->pll3div_vco, BIT(7));
+
+ /*
+ * PFD0: 380MHz/396/396/328
+ */
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F);
+ setbits_le32(&cgc1_regs->pll3pfdcfg, 25 << 0);
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7));
+ while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(6)))
+ ;
+
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 8);
+ setbits_le32(&cgc1_regs->pll3pfdcfg, 24 << 8);
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15));
+ while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(14)))
+ ;
+
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 16);
+ setbits_le32(&cgc1_regs->pll3pfdcfg, 24 << 16);
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23));
+ while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(22)))
+ ;
+
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 24);
+ setbits_le32(&cgc1_regs->pll3pfdcfg, 29 << 24);
+ clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31));
+ while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(30)))
+ ;
+
+ clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7));
+ clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(15));
+ clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(23));
+ clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(31));
+
+ clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7));
+ clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(15));
+ clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(23));
+ clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(31));
+}
+
+void cgc2_pll4_init(void)
+{
+ /* Disable PFD DIV and clear DIV */
+ writel(0x80808080, &cgc2_regs->pll4div_pfd0);
+ writel(0x80808080, &cgc2_regs->pll4div_pfd1);
+
+ /* Gate off and clear PFD */
+ writel(0x80808080, &cgc2_regs->pll4pfdcfg);
+
+ /* Disable PLL4 */
+ writel(0x0, &cgc2_regs->pll4csr);
+
+ /* Configure PLL4 to 528Mhz and clock source from SOSC */
+ writel(22 << 16, &cgc2_regs->pll4cfg);
+ writel(0x1, &cgc2_regs->pll4csr);
+
+ /* wait for PLL4 output valid */
+ while (!(readl(&cgc2_regs->pll4csr) & BIT(24)))
+ ;
+
+ /* Enable all 4 PFDs */
+ setbits_le32(&cgc2_regs->pll4pfdcfg, 30 << 0); /* 316.8Mhz for NIC_LPAV */
+ setbits_le32(&cgc2_regs->pll4pfdcfg, 18 << 8);
+ setbits_le32(&cgc2_regs->pll4pfdcfg, 12 << 16);
+ setbits_le32(&cgc2_regs->pll4pfdcfg, 24 << 24);
+
+ clrbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+
+ while ((readl(&cgc2_regs->pll4pfdcfg) & (BIT(30) | BIT(22) | BIT(14) | BIT(6)))
+ != (BIT(30) | BIT(22) | BIT(14) | BIT(6)))
+ ;
+
+ /* Enable PFD DIV */
+ clrbits_le32(&cgc2_regs->pll4div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+ clrbits_le32(&cgc2_regs->pll4div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+}
+
+void cgc2_ddrclk_config(u32 src, u32 div)
+{
+ writel((src << 28) | (div << 21), &cgc2_regs->ddrclk);
+ /* wait for DDRCLK switching done */
+ while (!(readl(&cgc2_regs->ddrclk) & BIT(27)))
+ ;
+}
+
+u32 decode_pll(enum cgc1_clk pll)
+{
+ u32 reg, infreq, mult;
+ u32 num, denom;
+
+ infreq = 24000000U;
+ /*
+ * Alought there are four choices for the bypass src,
+ * we choose SOSC 24M which is the default set in ROM.
+ * TODO: check more the comments
+ */
+ switch (pll) {
+ case PLL2:
+ reg = readl(&cgc1_regs->pll2csr);
+ if (!(reg & BIT(24)))
+ return 0;
+
+ reg = readl(&cgc1_regs->pll2cfg);
+ mult = (reg >> 16) & 0x7F;
+ denom = readl(&cgc1_regs->pll2denom) & 0x3FFFFFFF;
+ num = readl(&cgc1_regs->pll2num) & 0x3FFFFFFF;
+
+ return (u64)infreq * mult + (u64)infreq * num / denom;
+ case PLL3:
+ reg = readl(&cgc1_regs->pll3csr);
+ if (!(reg & BIT(24)))
+ return 0;
+
+ reg = readl(&cgc1_regs->pll3cfg);
+ mult = (reg >> 16) & 0x7F;
+ denom = readl(&cgc1_regs->pll3denom) & 0x3FFFFFFF;
+ num = readl(&cgc1_regs->pll3num) & 0x3FFFFFFF;
+
+ return (u64)infreq * mult + (u64)infreq * num / denom;
+ default:
+ printf("Unsupported pll clocks %d\n", pll);
+ break;
+ }
+
+ return 0;
+}
+
+u32 cgc1_pll3_vcodiv_rate(void)
+{
+ u32 reg, gate, div;
+
+ reg = readl(&cgc1_regs->pll3div_vco);
+ gate = BIT(7) & reg;
+ div = reg & 0x3F;
+
+ return gate ? 0 : decode_pll(PLL3) / (div + 1);
+}
+
+u32 cgc1_pll3_pfd_rate(enum cgc1_clk clk)
+{
+ u32 index, gate, vld, reg;
+
+ switch (clk) {
+ case PLL3_PFD0:
+ index = 0;
+ break;
+ case PLL3_PFD1:
+ index = 1;
+ break;
+ case PLL3_PFD2:
+ index = 2;
+ break;
+ case PLL3_PFD3:
+ index = 3;
+ break;
+ default:
+ return 0;
+ }
+
+ reg = readl(&cgc1_regs->pll3pfdcfg);
+ gate = reg & (BIT(7) << (index * 8));
+ vld = reg & (BIT(6) << (index * 8));
+
+ if (gate || !vld)
+ return 0;
+
+ return (u64)decode_pll(PLL3) * 18 / ((reg >> (index * 8)) & 0x3F);
+}
+
+u32 cgc1_pll3_pfd_div(enum cgc1_clk clk)
+{
+ void __iomem *base;
+ u32 pfd, index, gate, reg;
+
+ switch (clk) {
+ case PLL3_PFD0_DIV1:
+ base = &cgc1_regs->pll3div_pfd0;
+ pfd = PLL3_PFD0;
+ index = 0;
+ break;
+ case PLL3_PFD0_DIV2:
+ base = &cgc1_regs->pll3div_pfd0;
+ pfd = PLL3_PFD0;
+ index = 1;
+ break;
+ case PLL3_PFD1_DIV1:
+ base = &cgc1_regs->pll3div_pfd0;
+ pfd = PLL3_PFD1;
+ index = 2;
+ break;
+ case PLL3_PFD1_DIV2:
+ base = &cgc1_regs->pll3div_pfd0;
+ pfd = PLL3_PFD1;
+ index = 3;
+ break;
+ case PLL3_PFD2_DIV1:
+ base = &cgc1_regs->pll3div_pfd1;
+ pfd = PLL3_PFD2;
+ index = 0;
+ break;
+ case PLL3_PFD2_DIV2:
+ base = &cgc1_regs->pll3div_pfd1;
+ pfd = PLL3_PFD2;
+ index = 1;
+ break;
+ case PLL3_PFD3_DIV1:
+ base = &cgc1_regs->pll3div_pfd1;
+ pfd = PLL3_PFD3;
+ index = 2;
+ break;
+ case PLL3_PFD3_DIV2:
+ base = &cgc1_regs->pll3div_pfd1;
+ pfd = PLL3_PFD3;
+ index = 3;
+ break;
+ default:
+ return 0;
+ }
+
+ reg = readl(base);
+ gate = reg & (BIT(7) << (index * 8));
+
+ if (gate)
+ return 0;
+
+ return cgc1_pll3_pfd_rate(pfd) / (((reg >> (index * 8)) & 0x3F) + 1);
+}
+
+u32 cgc1_sosc_div(enum cgc1_clk clk)
+{
+ u32 reg, gate, index;
+
+ switch (clk) {
+ case SOSC:
+ return 24000000;
+ case SOSC_DIV1:
+ index = 0;
+ break;
+ case SOSC_DIV2:
+ index = 1;
+ break;
+ case SOSC_DIV3:
+ index = 2;
+ break;
+ default:
+ return 0;
+ }
+
+ reg = readl(&cgc1_regs->soscdiv);
+ gate = reg & (BIT(7) << (index * 8));
+
+ if (gate)
+ return 0;
+
+ return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1);
+}
+
+u32 cgc1_fro_div(enum cgc1_clk clk)
+{
+ u32 reg, gate, vld, index;
+
+ switch (clk) {
+ case FRO:
+ return 192000000;
+ case FRO_DIV1:
+ index = 0;
+ break;
+ case FRO_DIV2:
+ index = 1;
+ break;
+ case FRO_DIV3:
+ index = 2;
+ break;
+ default:
+ return 0;
+ }
+
+ reg = readl(&cgc1_regs->frodiv);
+ gate = reg & (BIT(7) << (index * 8));
+ vld = reg & (BIT(6) << (index * 8));
+
+ if (gate || !vld)
+ return 0;
+
+ return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1);
+}
+
+u32 cgc1_clk_get_rate(enum cgc1_clk clk)
+{
+ switch (clk) {
+ case SOSC:
+ case SOSC_DIV1:
+ case SOSC_DIV2:
+ case SOSC_DIV3:
+ return cgc1_sosc_div(clk);
+ case FRO:
+ case FRO_DIV1:
+ case FRO_DIV2:
+ case FRO_DIV3:
+ return cgc1_fro_div(clk);
+ case PLL2:
+ return decode_pll(PLL2);
+ case PLL3:
+ return decode_pll(PLL3);
+ case PLL3_VCODIV:
+ return cgc1_pll3_vcodiv_rate();
+ case PLL3_PFD0:
+ case PLL3_PFD1:
+ case PLL3_PFD2:
+ case PLL3_PFD3:
+ return cgc1_pll3_pfd_rate(clk);
+ case PLL3_PFD0_DIV1:
+ case PLL3_PFD0_DIV2:
+ case PLL3_PFD1_DIV1:
+ case PLL3_PFD1_DIV2:
+ case PLL3_PFD2_DIV1:
+ case PLL3_PFD2_DIV2:
+ case PLL3_PFD3_DIV1:
+ case PLL3_PFD3_DIV2:
+ return cgc1_pll3_pfd_div(clk);
+ default:
+ printf("Unsupported cgc1 clock: %d\n", clk);
+ return 0;
+ }
+}
@@ -4,24 +4,394 @@
*/
#include <common.h>
+#include <command.h>
#include <div64.h>
+#include <asm/arch/imx-regs.h>
#include <asm/io.h>
#include <errno.h>
#include <asm/arch/clock.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/cgc.h>
#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
DECLARE_GLOBAL_DATA_PTR;
+#define PLL_USB_EN_USB_CLKS_MASK (0x01 << 6)
+#define PLL_USB_PWR_MASK (0x01 << 12)
+#define PLL_USB_ENABLE_MASK (0x01 << 13)
+#define PLL_USB_BYPASS_MASK (0x01 << 16)
+#define PLL_USB_REG_ENABLE_MASK (0x01 << 21)
+#define PLL_USB_DIV_SEL_MASK (0x07 << 22)
+#define PLL_USB_LOCK_MASK (0x01 << 31)
+#define PCC5_LPDDR4_ADDR 0x2da70108
+
+static void lpuart_set_clk(u32 index, enum cgc1_clk clk)
+{
+ const u32 lpuart_pcc_slots[] = {
+ LPUART4_PCC3_SLOT,
+ LPUART5_PCC3_SLOT,
+ LPUART6_PCC4_SLOT,
+ LPUART7_PCC4_SLOT,
+ };
+
+ const u32 lpuart_pcc[] = {
+ 3, 3, 4, 4,
+ };
+
+ if (index > 3)
+ return;
+
+ pcc_clock_enable(lpuart_pcc[index], lpuart_pcc_slots[index], false);
+ pcc_clock_sel(lpuart_pcc[index], lpuart_pcc_slots[index], clk);
+ pcc_clock_enable(lpuart_pcc[index], lpuart_pcc_slots[index], true);
+
+ pcc_reset_peripheral(lpuart_pcc[index], lpuart_pcc_slots[index], false);
+}
+
+static void init_clk_lpuart(void)
+{
+ u32 index = 0, i;
+
+ const u32 lpuart_array[] = {
+ LPUART4_RBASE,
+ LPUART5_RBASE,
+ LPUART6_RBASE,
+ LPUART7_RBASE,
+ };
+
+ for (i = 0; i < 4; i++) {
+ if (lpuart_array[i] == LPUART_BASE) {
+ index = i;
+ break;
+ }
+ }
+
+ lpuart_set_clk(index, SOSC_DIV2);
+}
+
+void init_clk_fspi(int index)
+{
+ pcc_clock_enable(4, FLEXSPI2_PCC4_SLOT, false);
+ pcc_clock_sel(4, FLEXSPI2_PCC4_SLOT, PLL3_PFD2_DIV1);
+ pcc_clock_div_config(4, FLEXSPI2_PCC4_SLOT, false, 8);
+ pcc_clock_enable(4, FLEXSPI2_PCC4_SLOT, true);
+ pcc_reset_peripheral(4, FLEXSPI2_PCC4_SLOT, false);
+}
+
+void setclkout_ddr(void)
+{
+ writel(0x12800000, 0x2DA60020);
+ writel(0xa00, 0x298C0000); /* PTD0 */
+}
+
+void ddrphy_pll_lock(void)
+{
+ writel(0x00011542, 0x2E065964);
+ writel(0x00011542, 0x2E06586C);
+
+ writel(0x00000B01, 0x2E062000);
+ writel(0x00000B01, 0x2E060000);
+}
+
+void init_clk_ddr(void)
+{
+ /* enable pll4 and ddrclk*/
+ cgc2_pll4_init();
+ cgc2_ddrclk_config(1, 1);
+
+ /* enable ddr pcc */
+ writel(0xd0000000, PCC5_LPDDR4_ADDR);
+
+ /* for debug */
+ /* setclkout_ddr(); */
+}
+
+int set_ddr_clk(u32 phy_freq_mhz)
+{
+ debug("%s %u\n", __func__, phy_freq_mhz);
+
+ if (phy_freq_mhz == 48) {
+ writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+ cgc2_ddrclk_config(2, 0); /* 24Mhz DDR clock */
+ writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+ } else if (phy_freq_mhz == 384) {
+ writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+ cgc2_ddrclk_config(0, 0); /* 192Mhz DDR clock */
+ writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+ } else if (phy_freq_mhz == 528) {
+ writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+ cgc2_ddrclk_config(4, 1); /* 264Mhz DDR clock */
+ writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+ } else if (phy_freq_mhz == 264) {
+ writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+ cgc2_ddrclk_config(4, 3); /* 132Mhz DDR clock */
+ writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+ } else if (phy_freq_mhz == 192) {
+ writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+ cgc2_ddrclk_config(0, 1); /* 96Mhz DDR clock */
+ writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+ } else if (phy_freq_mhz == 96) {
+ writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+ cgc2_ddrclk_config(0, 3); /* 48Mhz DDR clock */
+ writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+ } else {
+ printf("ddr phy clk %uMhz is not supported\n", phy_freq_mhz);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
void clock_init(void)
{
+ cgc1_soscdiv_init();
+ cgc1_init_core_clk();
+
+ init_clk_lpuart();
+
+ pcc_clock_enable(4, SDHC0_PCC4_SLOT, false);
+ pcc_clock_sel(4, SDHC0_PCC4_SLOT, PLL3_PFD1_DIV2);
+ pcc_clock_enable(4, SDHC0_PCC4_SLOT, true);
+ pcc_reset_peripheral(4, SDHC0_PCC4_SLOT, false);
+
+ pcc_clock_enable(4, SDHC1_PCC4_SLOT, false);
+ pcc_clock_sel(4, SDHC1_PCC4_SLOT, PLL3_PFD2_DIV1);
+ pcc_clock_enable(4, SDHC1_PCC4_SLOT, true);
+ pcc_reset_peripheral(4, SDHC1_PCC4_SLOT, false);
+
+ pcc_clock_enable(4, SDHC2_PCC4_SLOT, false);
+ pcc_clock_sel(4, SDHC2_PCC4_SLOT, PLL3_PFD2_DIV1);
+ pcc_clock_enable(4, SDHC2_PCC4_SLOT, true);
+ pcc_reset_peripheral(4, SDHC2_PCC4_SLOT, false);
+
+ /* Enable upower mu1 clk */
+ pcc_clock_enable(3, UPOWER_PCC3_SLOT, true);
+
+ /*
+ * Enable clock division
+ * TODO: may not needed after ROM ready.
+ */
+}
+
+#if IS_ENABLED(CONFIG_SYS_I2C_IMX_LPI2C)
+int enable_i2c_clk(unsigned char enable, u32 i2c_num)
+{
+ /* Set parent to FIRC DIV2 clock */
+ const u32 lpi2c_pcc_clks[] = {
+ LPI2C4_PCC3_SLOT << 8 | 3,
+ LPI2C5_PCC3_SLOT << 8 | 3,
+ LPI2C6_PCC4_SLOT << 8 | 4,
+ LPI2C7_PCC4_SLOT << 8 | 4,
+ };
+
+ if (i2c_num < 4 || i2c_num > 7)
+ return -EINVAL;
+
+ if (enable) {
+ pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+ lpi2c_pcc_clks[i2c_num - 4] >> 8, false);
+ pcc_clock_sel(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+ lpi2c_pcc_clks[i2c_num - 4] >> 8, SOSC_DIV2);
+ pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+ lpi2c_pcc_clks[i2c_num - 4] >> 8, true);
+ pcc_reset_peripheral(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+ lpi2c_pcc_clks[i2c_num - 4] >> 8, false);
+ } else {
+ pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+ lpi2c_pcc_clks[i2c_num - 4] >> 8, false);
+ }
+ return 0;
+}
+
+u32 imx_get_i2cclk(u32 i2c_num)
+{
+ const u32 lpi2c_pcc_clks[] = {
+ LPI2C4_PCC3_SLOT << 8 | 3,
+ LPI2C5_PCC3_SLOT << 8 | 3,
+ LPI2C6_PCC4_SLOT << 8 | 4,
+ LPI2C7_PCC4_SLOT << 8 | 4,
+ };
+
+ if (i2c_num < 4 || i2c_num > 7)
+ return 0;
+
+ return pcc_clock_get_rate(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+ lpi2c_pcc_clks[i2c_num - 4] >> 8);
+}
+#endif
+
+void enable_usboh3_clk(unsigned char enable)
+{
+ if (enable) {
+ pcc_clock_enable(4, USB0_PCC4_SLOT, true);
+ pcc_clock_enable(4, USBPHY_PCC4_SLOT, true);
+ pcc_reset_peripheral(4, USB0_PCC4_SLOT, false);
+ pcc_reset_peripheral(4, USBPHY_PCC4_SLOT, false);
+
+#ifdef CONFIG_USB_MAX_CONTROLLER_COUNT
+ if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1) {
+ pcc_clock_enable(4, USB1_PCC4_SLOT, true);
+ pcc_clock_enable(4, USB1PHY_PCC4_SLOT, true);
+ pcc_reset_peripheral(4, USB1_PCC4_SLOT, false);
+ pcc_reset_peripheral(4, USB1PHY_PCC4_SLOT, false);
+ }
+#endif
+
+ pcc_clock_enable(4, USB_XBAR_PCC4_SLOT, true);
+ } else {
+ pcc_clock_enable(4, USB0_PCC4_SLOT, false);
+ pcc_clock_enable(4, USB1_PCC4_SLOT, false);
+ pcc_clock_enable(4, USBPHY_PCC4_SLOT, false);
+ pcc_clock_enable(4, USB1PHY_PCC4_SLOT, false);
+ pcc_clock_enable(4, USB_XBAR_PCC4_SLOT, false);
+ }
}
-unsigned int mxc_get_clock(enum mxc_clock clk)
+int enable_usb_pll(ulong usb_phy_base)
{
+ u32 sosc_rate;
+ s32 timeout = 1000000;
+
+ struct usbphy_regs *usbphy =
+ (struct usbphy_regs *)usb_phy_base;
+
+ sosc_rate = cgc1_sosc_div(SOSC);
+ if (!sosc_rate)
+ return -EPERM;
+
+ if (!(readl(&usbphy->usb1_pll_480_ctrl) & PLL_USB_LOCK_MASK)) {
+ writel(0x1c00000, &usbphy->usb1_pll_480_ctrl_clr);
+
+ switch (sosc_rate) {
+ case 24000000:
+ writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+ break;
+
+ case 30000000:
+ writel(0x800000, &usbphy->usb1_pll_480_ctrl_set);
+ break;
+
+ case 19200000:
+ writel(0x1400000, &usbphy->usb1_pll_480_ctrl_set);
+ break;
+
+ default:
+ writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+ break;
+ }
+
+ /* Enable the regulator first */
+ writel(PLL_USB_REG_ENABLE_MASK,
+ &usbphy->usb1_pll_480_ctrl_set);
+
+ /* Wait at least 15us */
+ udelay(15);
+
+ /* Enable the power */
+ writel(PLL_USB_PWR_MASK, &usbphy->usb1_pll_480_ctrl_set);
+
+ /* Wait lock */
+ while (timeout--) {
+ if (readl(&usbphy->usb1_pll_480_ctrl) &
+ PLL_USB_LOCK_MASK)
+ break;
+ }
+
+ if (timeout <= 0) {
+ /* If timeout, we power down the pll */
+ writel(PLL_USB_PWR_MASK,
+ &usbphy->usb1_pll_480_ctrl_clr);
+ return -ETIME;
+ }
+ }
+
+ /* Clear the bypass */
+ writel(PLL_USB_BYPASS_MASK, &usbphy->usb1_pll_480_ctrl_clr);
+
+ /* Enable the PLL clock out to USB */
+ writel((PLL_USB_EN_USB_CLKS_MASK | PLL_USB_ENABLE_MASK),
+ &usbphy->usb1_pll_480_ctrl_set);
+
return 0;
}
+u32 mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_ESDHC_CLK:
+ return pcc_clock_get_rate(4, SDHC0_PCC4_SLOT);
+ case MXC_ESDHC2_CLK:
+ return pcc_clock_get_rate(4, SDHC1_PCC4_SLOT);
+ case MXC_ESDHC3_CLK:
+ return pcc_clock_get_rate(4, SDHC2_PCC4_SLOT);
+ case MXC_ARM_CLK:
+ return cgc1_clk_get_rate(PLL2);
+ default:
+ return 0;
+ }
+}
+
u32 get_lpuart_clk(void)
{
- return 24000000;
+ int index = 0;
+
+ const u32 lpuart_array[] = {
+ LPUART4_RBASE,
+ LPUART5_RBASE,
+ LPUART6_RBASE,
+ LPUART7_RBASE,
+ };
+
+ const u32 lpuart_pcc_slots[] = {
+ LPUART4_PCC3_SLOT,
+ LPUART5_PCC3_SLOT,
+ LPUART6_PCC4_SLOT,
+ LPUART7_PCC4_SLOT,
+ };
+
+ const u32 lpuart_pcc[] = {
+ 3, 3, 4, 4,
+ };
+
+ for (index = 0; index < 4; index++) {
+ if (lpuart_array[index] == LPUART_BASE)
+ break;
+ }
+
+ if (index > 3)
+ return 0;
+
+ return pcc_clock_get_rate(lpuart_pcc[index], lpuart_pcc_slots[index]);
+}
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Dump some core clockes.
+ */
+int do_mx8ulp_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
+{
+ printf("SDHC0 %8d MHz\n", pcc_clock_get_rate(4, SDHC0_PCC4_SLOT) / 1000000);
+ printf("SDHC1 %8d MHz\n", pcc_clock_get_rate(4, SDHC1_PCC4_SLOT) / 1000000);
+ printf("SDHC2 %8d MHz\n", pcc_clock_get_rate(4, SDHC2_PCC4_SLOT) / 1000000);
+
+ printf("SOSC %8d MHz\n", cgc1_clk_get_rate(SOSC) / 1000000);
+ printf("FRO %8d MHz\n", cgc1_clk_get_rate(FRO) / 1000000);
+ printf("PLL2 %8d MHz\n", cgc1_clk_get_rate(PLL2) / 1000000);
+ printf("PLL3 %8d MHz\n", cgc1_clk_get_rate(PLL3) / 1000000);
+ printf("PLL3_VCODIV %8d MHz\n", cgc1_clk_get_rate(PLL3_VCODIV) / 1000000);
+ printf("PLL3_PFD0 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD0) / 1000000);
+ printf("PLL3_PFD1 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD1) / 1000000);
+ printf("PLL3_PFD2 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD2) / 1000000);
+ printf("PLL3_PFD3 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD3) / 1000000);
+
+ return 0;
}
+
+U_BOOT_CMD(
+ clocks, CONFIG_SYS_MAXARGS, 1, do_mx8ulp_showclocks,
+ "display clocks",
+ ""
+);
+#endif
new file mode 100644
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/cgc.h>
+#include <asm/arch/sys_proto.h>
+
+#define cgc1_clk_TYPES 2
+#define cgc1_clk_NUM 8
+
+static enum cgc1_clk pcc3_clksrc[][8] = {
+ {
+ },
+ { DUMMY0_CLK,
+ LPOSC,
+ SOSC_DIV2,
+ FRO_DIV2,
+ XBAR_BUSCLK,
+ PLL3_PFD1_DIV1,
+ PLL3_PFD0_DIV2,
+ PLL3_PFD0_DIV1
+ }
+};
+
+static enum cgc1_clk pcc4_clksrc[][8] = {
+ {
+ DUMMY0_CLK,
+ SOSC_DIV1,
+ FRO_DIV1,
+ PLL3_PFD3_DIV2,
+ PLL3_PFD3_DIV1,
+ PLL3_PFD2_DIV2,
+ PLL3_PFD2_DIV1,
+ PLL3_PFD1_DIV2
+ },
+ {
+ DUMMY0_CLK,
+ DUMMY1_CLK,
+ LPOSC,
+ SOSC_DIV2,
+ FRO_DIV2,
+ XBAR_BUSCLK,
+ PLL3_VCODIV,
+ PLL3_PFD0_DIV1
+ }
+};
+
+static struct pcc_entry pcc3_arrays[] = {
+ {PCC3_RBASE, DMA1_MP_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH0_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH1_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH2_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH3_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH4_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH5_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH6_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH7_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH8_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH9_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH10_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH11_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH12_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH13_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH14_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH15_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH16_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH17_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH18_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH19_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH20_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH21_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH22_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH23_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH24_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH25_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH26_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH27_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH28_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH29_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH30_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, DMA1_CH31_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, MU0_B_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, MU3_A_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, LLWU1_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, UPOWER_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, WDOG3_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, WDOG4_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, XRDC_MGR_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, SEMA42_1_PCC3_SLOT, CLKSRC_PER_BUS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, ROMCP1_PCC3_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+ {PCC3_RBASE, LPIT1_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, TPM4_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, TPM5_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, FLEXIO1_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, I3C2_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, LPI2C4_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, LPI2C5_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, LPUART4_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, LPUART5_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, LPSPI4_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {PCC3_RBASE, LPSPI5_PCC3_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+ {}
+};
+
+static struct pcc_entry pcc4_arrays[] = {
+ {PCC4_RBASE, FLEXSPI2_PCC4_SLOT, CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, TPM6_PCC4_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, TPM7_PCC4_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, LPI2C6_PCC4_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, LPI2C7_PCC4_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, LPUART6_PCC4_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, LPUART7_PCC4_SLOT, CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, SAI4_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, SAI5_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, PCTLE_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+ {PCC4_RBASE, PCTLF_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+ {PCC4_RBASE, SDHC0_PCC4_SLOT, CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, SDHC1_PCC4_SLOT, CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, SDHC2_PCC4_SLOT, CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, USB0_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, USBPHY_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, USB1_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, USB1PHY_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, USB_XBAR_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+ {PCC4_RBASE, ENET_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+ {PCC4_RBASE, SFA1_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+ {PCC4_RBASE, RGPIOE_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+ {PCC4_RBASE, RGPIOF_PCC4_SLOT, CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+ {}
+};
+
+static int find_pcc_entry(int pcc_controller, int pcc_clk_slot, struct pcc_entry **out)
+{
+ struct pcc_entry *pcc_array;
+ int index = 0;
+
+ switch (pcc_controller) {
+ case 3:
+ pcc_array = pcc3_arrays;
+ *out = &pcc3_arrays[0];
+ break;
+ case 4:
+ pcc_array = pcc4_arrays;
+ *out = &pcc4_arrays[0];
+ break;
+ default:
+ printf("Not supported pcc_controller: %d\n", pcc_controller);
+ return -EINVAL;
+ }
+
+ while (pcc_array->pcc_base) {
+ if (pcc_array->pcc_slot == pcc_clk_slot)
+ return index;
+
+ pcc_array++;
+ index++;
+ }
+
+ return -ENOENT;
+}
+
+int pcc_clock_enable(int pcc_controller, int pcc_clk_slot, bool enable)
+{
+ u32 val;
+ void __iomem *reg;
+ int clk;
+ struct pcc_entry *pcc_array;
+
+ clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+ if (clk < 0)
+ return -EINVAL;
+
+ reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+ val = readl(reg);
+
+ debug("%s: clk %d, reg 0x%p, val 0x%x, enable %d\n", __func__, clk, reg, val, enable);
+
+ if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK))
+ return -EPERM;
+
+ if (enable)
+ val |= PCC_CGC_MASK;
+ else
+ val &= ~PCC_CGC_MASK;
+
+ writel(val, reg);
+
+ debug("%s: val 0x%x\n", __func__, val);
+
+ return 0;
+}
+
+/* The clock source select needs clock is disabled */
+int pcc_clock_sel(int pcc_controller, int pcc_clk_slot, enum cgc1_clk src)
+{
+ u32 val, i, clksrc_type;
+ void __iomem *reg;
+ struct pcc_entry *pcc_array;
+ enum cgc1_clk *cgc1_clk_array;
+ int clk;
+
+ clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+ if (clk < 0)
+ return -EINVAL;
+
+ reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+ clksrc_type = pcc_array[clk].clksrc;
+ if (clksrc_type >= CLKSRC_NO_PCS) {
+ printf("No PCS field for the PCC %d, clksrc type %d\n",
+ clk, clksrc_type);
+ return -EPERM;
+ }
+
+ if (pcc_controller == 3)
+ cgc1_clk_array = pcc3_clksrc[clksrc_type];
+ else
+ cgc1_clk_array = pcc4_clksrc[clksrc_type];
+
+ for (i = 0; i < cgc1_clk_NUM; i++) {
+ if (cgc1_clk_array[i] == src) {
+ /* Find the clock src, then set it to PCS */
+ break;
+ }
+ }
+
+ if (i == cgc1_clk_NUM) {
+ printf("No parent in PCS of PCC %d, invalid scg_clk %d\n", clk, src);
+ return -EINVAL;
+ }
+
+ val = readl(reg);
+
+ debug("%s: clk %d, reg 0x%p, val 0x%x, clksrc_type %d\n",
+ __func__, clk, reg, val, clksrc_type);
+
+ if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+ (val & PCC_CGC_MASK)) {
+ printf("Not permit to select clock source val = 0x%x\n", val);
+ return -EPERM;
+ }
+
+ val &= ~PCC_PCS_MASK;
+ val |= i << PCC_PCS_OFFSET;
+
+ writel(val, reg);
+
+ debug("%s: val 0x%x\n", __func__, val);
+
+ return 0;
+}
+
+int pcc_clock_div_config(int pcc_controller, int pcc_clk_slot, bool frac, u8 div)
+{
+ u32 val;
+ void __iomem *reg;
+ struct pcc_entry *pcc_array;
+ int clk;
+
+ clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+ if (clk < 0)
+ return -EINVAL;
+
+ reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+ if (div > 8 || (div == 1 && frac != 0))
+ return -EINVAL;
+
+ if (pcc_array[clk].div >= PCC_NO_DIV) {
+ printf("No DIV/FRAC field for the PCC %d\n", clk);
+ return -EPERM;
+ }
+
+ val = readl(reg);
+
+ if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+ (val & PCC_CGC_MASK)) {
+ printf("Not permit to set div/frac val = 0x%x\n", val);
+ return -EPERM;
+ }
+
+ if (frac)
+ val |= PCC_FRAC_MASK;
+ else
+ val &= ~PCC_FRAC_MASK;
+
+ val &= ~PCC_PCD_MASK;
+ val |= (div - 1) & PCC_PCD_MASK;
+
+ writel(val, reg);
+
+ return 0;
+}
+
+bool pcc_clock_is_enable(int pcc_controller, int pcc_clk_slot)
+{
+ u32 val;
+ void __iomem *reg;
+ struct pcc_entry *pcc_array;
+ int clk;
+
+ clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+ if (clk < 0)
+ return -EINVAL;
+
+ reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+ val = readl(reg);
+
+ if ((val & PCC_INUSE_MASK) || (val & PCC_CGC_MASK))
+ return true;
+
+ return false;
+}
+
+int pcc_clock_get_clksrc(int pcc_controller, int pcc_clk_slot, enum cgc1_clk *src)
+{
+ u32 val, clksrc_type;
+ void __iomem *reg;
+ struct pcc_entry *pcc_array;
+ int clk;
+ enum cgc1_clk *cgc1_clk_array;
+
+ clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+ if (clk < 0)
+ return -EINVAL;
+
+ clksrc_type = pcc_array[clk].clksrc;
+ if (clksrc_type >= CLKSRC_NO_PCS) {
+ printf("No PCS field for the PCC %d, clksrc type %d\n",
+ pcc_clk_slot, clksrc_type);
+ return -EPERM;
+ }
+
+ reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+ val = readl(reg);
+
+ debug("%s: clk %d, reg 0x%p, val 0x%x, type %d\n",
+ __func__, pcc_clk_slot, reg, val, clksrc_type);
+
+ if (!(val & PCC_PR_MASK)) {
+ printf("This pcc slot is not present = 0x%x\n", val);
+ return -EPERM;
+ }
+
+ val &= PCC_PCS_MASK;
+ val = (val >> PCC_PCS_OFFSET);
+
+ if (!val) {
+ printf("Clock source is off\n");
+ return -EIO;
+ }
+
+ if (pcc_controller == 3)
+ cgc1_clk_array = pcc3_clksrc[clksrc_type];
+ else
+ cgc1_clk_array = pcc4_clksrc[clksrc_type];
+
+ *src = cgc1_clk_array[val];
+
+ debug("%s: parent cgc1 clk %d\n", __func__, *src);
+
+ return 0;
+}
+
+int pcc_reset_peripheral(int pcc_controller, int pcc_clk_slot, bool reset)
+{
+ u32 val;
+ void __iomem *reg;
+ struct pcc_entry *pcc_array;
+ int clk;
+
+ clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+ if (clk < 0)
+ return -EINVAL;
+
+ if (pcc_array[clk].rst_b == PCC_NO_RST_B)
+ return 0;
+
+ reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+ val = readl(reg);
+
+ debug("%s: clk %d, reg 0x%p, val 0x%x\n", __func__, pcc_clk_slot, reg, val);
+
+ if (!(val & PCC_PR_MASK)) {
+ printf("This pcc slot is not present = 0x%x\n", val);
+ return -EPERM;
+ }
+
+ if (reset)
+ val &= ~BIT(28);
+ else
+ val |= BIT(28);
+
+ writel(val, reg);
+
+ debug("%s: clk %d, reg 0x%p, val 0x%x\n", __func__, pcc_clk_slot, reg, val);
+
+ return 0;
+}
+
+u32 pcc_clock_get_rate(int pcc_controller, int pcc_clk_slot)
+{
+ u32 val, rate, frac, div;
+ void __iomem *reg;
+ enum cgc1_clk parent;
+ int ret;
+ int clk;
+ struct pcc_entry *pcc_array;
+
+ clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+ if (clk < 0)
+ return -EINVAL;
+
+ ret = pcc_clock_get_clksrc(pcc_controller, pcc_clk_slot, &parent);
+ if (ret)
+ return 0;
+
+ rate = cgc1_clk_get_rate(parent);
+
+ debug("%s: parent rate %u\n", __func__, rate);
+
+ if (pcc_array[clk].div == PCC_HAS_DIV) {
+ reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base +
+ pcc_array[clk].pcc_slot * 4);
+ val = readl(reg);
+
+ frac = (val & PCC_FRAC_MASK) >> PCC_FRAC_OFFSET;
+ div = (val & PCC_PCD_MASK) >> PCC_PCD_OFFSET;
+
+ /*
+ * Theoretically don't have overflow in the calc,
+ * the rate won't exceed 2G
+ */
+ rate = rate * (frac + 1) / (div + 1);
+ }
+
+ debug("%s: rate %u\n", __func__, rate);
+ return rate;
+}
@@ -287,5 +287,8 @@ void get_board_serial(struct tag_serialnr *serialnr)
int arch_cpu_init(void)
{
+ if (IS_ENABLED(CONFIG_SPL_BUILD))
+ clock_init();
+
return 0;
}