| Message ID | 1627972461-2627-4-git-send-email-hsin-hsiung.wang@mediatek.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add SPMI support for Mediatek SoC IC | expand |
Quoting Hsin-Hsiung Wang (2021-08-02 23:34:19) > diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c > new file mode 100644 > index 000000000000..94c45d46ab0c > --- /dev/null > +++ b/drivers/spmi/spmi-mtk-pmif.c > @@ -0,0 +1,465 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// > +// Copyright (c) 2021 MediaTek Inc. > + > +#include <linux/clk.h> > +#include <linux/iopoll.h> > +#include <linux/module.h> > +#include <linux/of_device.h> include platform_device.h for the platform device driver that this is. > +#include <linux/spmi.h> > + > +#define SWINF_IDLE 0x00 > +#define SWINF_WFVLDCLR 0x06 > + > +#define GET_SWINF(x) (((x) >> 1) & 0x7) > + > +#define PMIF_CMD_REG_0 0 > +#define PMIF_CMD_REG 1 > +#define PMIF_CMD_EXT_REG 2 > +#define PMIF_CMD_EXT_REG_LONG 3 > + > +#define PMIF_DELAY_US 10 > +#define PMIF_TIMEOUT_US (10 * 1000) > + > +#define PMIF_CHAN_OFFSET 0x5 > + > +#define PMIF_MAX_CLKS 3 > + > +#define SPMI_OP_ST_BUSY 1 > + > +struct ch_reg { > + u32 ch_sta; > + u32 wdata; > + u32 rdata; > + u32 ch_send; > + u32 ch_rdy; > +}; > + > +struct pmif_data { > + const u32 *regs; > + const u32 *spmimst_regs; > + u32 soc_chan; > +}; > + > +struct pmif { > + void __iomem *base; > + void __iomem *spmimst_base; > + struct ch_reg chan; > + struct clk_bulk_data clks[PMIF_MAX_CLKS]; > + u32 nclks; size_t? Surely 32-bits isn't important. > + const struct pmif_data *data; > +}; > + > +static const char * const pmif_clock_names[] = { > + "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux", > +}; [...] > + > +static bool pmif_is_fsm_vldclr(struct pmif *arb) > +{ > + u32 reg_rdata; > + > + reg_rdata = pmif_readl(arb, arb->chan.ch_sta); Newline here please. > + return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR; > +} > + > +static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid) > +{ > + struct pmif *arb = spmi_controller_get_drvdata(ctrl); > + u32 rdata, cmd; > + int ret; > + > + /* Check the opcode */ > + if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP) > + return -EINVAL; > + > + cmd = opc - SPMI_CMD_RESET; > + > + mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL); > + ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA], > + rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY, > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > + if (ret < 0) > + dev_err(&ctrl->dev, "timeout, err = %d\n", ret); > + > + return ret; > +} > + > +static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, > + u16 addr, u8 *buf, size_t len) > +{ > + struct pmif *arb = spmi_controller_get_drvdata(ctrl); > + struct ch_reg *inf_reg; > + int ret; > + u32 data, cmd; > + > + /* Check for argument validation. */ > + if (sid & ~0xf) { > + dev_err(&ctrl->dev, "exceed the max slv id\n"); > + return -EINVAL; > + } > + > + if (len > 4) { > + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len); Missing newline > + return -EINVAL; > + } > + > + if (opc >= 0x60 && opc <= 0x7f) > + opc = PMIF_CMD_REG; > + else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f)) > + opc = PMIF_CMD_EXT_REG_LONG; > + else > + return -EINVAL; > + > + /* Wait for Software Interface FSM state to be IDLE. */ > + inf_reg = &arb->chan; > + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], > + data, GET_SWINF(data) == SWINF_IDLE, > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > + if (ret < 0) { > + /* set channel ready if the data has transferred */ > + if (pmif_is_fsm_vldclr(arb)) > + pmif_writel(arb, 1, inf_reg->ch_rdy); > + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); > + goto out; > + } > + > + /* Send the command. */ > + cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr; > + pmif_writel(arb, cmd, inf_reg->ch_send); > + > + /* > + * Wait for Software Interface FSM state to be WFVLDCLR, > + * read the data and clear the valid flag. > + */ > + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], > + data, GET_SWINF(data) == SWINF_WFVLDCLR, > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > + if (ret < 0) { > + dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n"); > + goto out; > + } > + > + data = pmif_readl(arb, inf_reg->rdata); > + memcpy(buf, &data, len); > + pmif_writel(arb, 1, inf_reg->ch_rdy); > + > +out: > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, > + u16 addr, const u8 *buf, size_t len) > +{ > + struct pmif *arb = spmi_controller_get_drvdata(ctrl); > + struct ch_reg *inf_reg; > + int ret; > + u32 data, cmd; > + > + if (len > 4) { > + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len); Missing newline > + return -EINVAL; > + } > + > + /* Check the opcode */ > + if (opc >= 0x40 && opc <= 0x5F) > + opc = PMIF_CMD_REG; > + else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37)) > + opc = PMIF_CMD_EXT_REG_LONG; > + else if (opc >= 0x80) > + opc = PMIF_CMD_REG_0; > + else > + return -EINVAL; > + > + /* Wait for Software Interface FSM state to be IDLE. */ > + inf_reg = &arb->chan; > + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], > + data, GET_SWINF(data) == SWINF_IDLE, > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > + if (ret < 0) { > + /* set channel ready if the data has transferred */ > + if (pmif_is_fsm_vldclr(arb)) > + pmif_writel(arb, 1, inf_reg->ch_rdy); > + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); > + goto out; > + } > + > + /* Set the write data. */ > + memcpy(&data, buf, len); > + pmif_writel(arb, data, inf_reg->wdata); > + > + /* Send the command. */ > + cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr; > + pmif_writel(arb, cmd, inf_reg->ch_send); > + > +out: > + if (ret < 0) > + return ret; > + > + return 0; Simplify to out: return ret; > +} > + > +static const struct pmif_data mt6873_pmif_arb = { > + .regs = mt6873_regs, > + .spmimst_regs = mt6873_spmi_regs, > + .soc_chan = 2, > +}; > + > +static int mtk_spmi_probe(struct platform_device *pdev) > +{ > + struct pmif *arb; > + struct spmi_controller *ctrl; > + int err, i; > + u32 chan_offset; > + > + ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb)); > + if (!ctrl) > + return -ENOMEM; > + > + arb = spmi_controller_get_drvdata(ctrl); > + arb->data = of_device_get_match_data(&pdev->dev); Use device_get_match_data() instead please. > + if (!arb->data) { > + err = -EINVAL; > + dev_err(&pdev->dev, "Cannot get drv_data\n"); > + goto err_put_ctrl; > + } > + > + arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif"); > + if (IS_ERR(arb->base)) { > + err = PTR_ERR(arb->base); > + dev_err(&pdev->dev, "pmif failed to get the remappped memory\n"); Please drop print as the API already prints errors for every problem. > + goto err_put_ctrl; > + } > + > + arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst"); > + if (IS_ERR(arb->spmimst_base)) { > + err = PTR_ERR(arb->spmimst_base); > + dev_err(&pdev->dev, "spmimst failed to get the remappped memory\n"); Please drop print as the API already prints errors for every problem. > + goto err_put_ctrl; > + } > + > + arb->nclks = ARRAY_SIZE(pmif_clock_names); > + if (arb->nclks > PMIF_MAX_CLKS) { > + err = -EINVAL; > + dev_err(&pdev->dev, "exceed the max clock numbers\n"); Do we really care? The dt schema should be checking this instead of the driver. > + goto err_put_ctrl; > + } > + > + for (i = 0; i < arb->nclks; i++) > + arb->clks[i].id = pmif_clock_names[i]; > +
Hi, On Mon, 2021-08-09 at 10:55 -0700, Stephen Boyd wrote: > Quoting Hsin-Hsiung Wang (2021-08-02 23:34:19) > > diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c > > new file mode 100644 > > index 000000000000..94c45d46ab0c > > --- /dev/null > > +++ b/drivers/spmi/spmi-mtk-pmif.c > > @@ -0,0 +1,465 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +// > > +// Copyright (c) 2021 MediaTek Inc. > > + > > +#include <linux/clk.h> > > +#include <linux/iopoll.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > include platform_device.h for the platform device driver that this is. > Thanks for the commit, I will update it in the next patch. > > +#include <linux/spmi.h> > > + > > +#define SWINF_IDLE 0x00 > > +#define SWINF_WFVLDCLR 0x06 > > + > > +#define GET_SWINF(x) (((x) >> 1) & 0x7) > > + > > +#define PMIF_CMD_REG_0 0 > > +#define PMIF_CMD_REG 1 > > +#define PMIF_CMD_EXT_REG 2 > > +#define PMIF_CMD_EXT_REG_LONG 3 > > + > > +#define PMIF_DELAY_US 10 > > +#define PMIF_TIMEOUT_US (10 * 1000) > > + > > +#define PMIF_CHAN_OFFSET 0x5 > > + > > +#define PMIF_MAX_CLKS 3 > > + > > +#define SPMI_OP_ST_BUSY 1 > > + > > +struct ch_reg { > > + u32 ch_sta; > > + u32 wdata; > > + u32 rdata; > > + u32 ch_send; > > + u32 ch_rdy; > > +}; > > + > > +struct pmif_data { > > + const u32 *regs; > > + const u32 *spmimst_regs; > > + u32 soc_chan; > > +}; > > + > > +struct pmif { > > + void __iomem *base; > > + void __iomem *spmimst_base; > > + struct ch_reg chan; > > + struct clk_bulk_data clks[PMIF_MAX_CLKS]; > > + u32 nclks; > > size_t? Surely 32-bits isn't important. > Thanks. I will use size_t in the next patch. > > + const struct pmif_data *data; > > +}; > > + > > +static const char * const pmif_clock_names[] = { > > + "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux", > > +}; > [...] > > + > > +static bool pmif_is_fsm_vldclr(struct pmif *arb) > > +{ > > + u32 reg_rdata; > > + > > + reg_rdata = pmif_readl(arb, arb->chan.ch_sta); > > Newline here please. > Thanks, I will update it in the next patch. > > + return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR; > > +} > > + > > +static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid) > > +{ > > + struct pmif *arb = spmi_controller_get_drvdata(ctrl); > > + u32 rdata, cmd; > > + int ret; > > + > > + /* Check the opcode */ > > + if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP) > > + return -EINVAL; > > + > > + cmd = opc - SPMI_CMD_RESET; > > + > > + mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL); > > + ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA], > > + rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY, > > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > > + if (ret < 0) > > + dev_err(&ctrl->dev, "timeout, err = %d\n", ret); > > + > > + return ret; > > +} > > + > > +static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, > > + u16 addr, u8 *buf, size_t len) > > +{ > > + struct pmif *arb = spmi_controller_get_drvdata(ctrl); > > + struct ch_reg *inf_reg; > > + int ret; > > + u32 data, cmd; > > + > > + /* Check for argument validation. */ > > + if (sid & ~0xf) { > > + dev_err(&ctrl->dev, "exceed the max slv id\n"); > > + return -EINVAL; > > + } > > + > > + if (len > 4) { > > + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len); > > Missing newline > Thanks, I will update it in the next patch. > > + return -EINVAL; > > + } > > + > > + if (opc >= 0x60 && opc <= 0x7f) > > + opc = PMIF_CMD_REG; > > + else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f)) > > + opc = PMIF_CMD_EXT_REG_LONG; > > + else > > + return -EINVAL; > > + > > + /* Wait for Software Interface FSM state to be IDLE. */ > > + inf_reg = &arb->chan; > > + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], > > + data, GET_SWINF(data) == SWINF_IDLE, > > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > > + if (ret < 0) { > > + /* set channel ready if the data has transferred */ > > + if (pmif_is_fsm_vldclr(arb)) > > + pmif_writel(arb, 1, inf_reg->ch_rdy); > > + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); > > + goto out; > > + } > > + > > + /* Send the command. */ > > + cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr; > > + pmif_writel(arb, cmd, inf_reg->ch_send); > > + > > + /* > > + * Wait for Software Interface FSM state to be WFVLDCLR, > > + * read the data and clear the valid flag. > > + */ > > + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], > > + data, GET_SWINF(data) == SWINF_WFVLDCLR, > > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > > + if (ret < 0) { > > + dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n"); > > + goto out; > > + } > > + > > + data = pmif_readl(arb, inf_reg->rdata); > > + memcpy(buf, &data, len); > > + pmif_writel(arb, 1, inf_reg->ch_rdy); > > + > > +out: > > + if (ret < 0) > > + return ret; > > + > > + return 0; > > +} > > + > > +static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, > > + u16 addr, const u8 *buf, size_t len) > > +{ > > + struct pmif *arb = spmi_controller_get_drvdata(ctrl); > > + struct ch_reg *inf_reg; > > + int ret; > > + u32 data, cmd; > > + > > + if (len > 4) { > > + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len); > > Missing newline > Thanks, I will update it in the next patch. > > + return -EINVAL; > > + } > > + > > + /* Check the opcode */ > > + if (opc >= 0x40 && opc <= 0x5F) > > + opc = PMIF_CMD_REG; > > + else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37)) > > + opc = PMIF_CMD_EXT_REG_LONG; > > + else if (opc >= 0x80) > > + opc = PMIF_CMD_REG_0; > > + else > > + return -EINVAL; > > + > > + /* Wait for Software Interface FSM state to be IDLE. */ > > + inf_reg = &arb->chan; > > + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], > > + data, GET_SWINF(data) == SWINF_IDLE, > > + PMIF_DELAY_US, PMIF_TIMEOUT_US); > > + if (ret < 0) { > > + /* set channel ready if the data has transferred */ > > + if (pmif_is_fsm_vldclr(arb)) > > + pmif_writel(arb, 1, inf_reg->ch_rdy); > > + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); > > + goto out; > > + } > > + > > + /* Set the write data. */ > > + memcpy(&data, buf, len); > > + pmif_writel(arb, data, inf_reg->wdata); > > + > > + /* Send the command. */ > > + cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr; > > + pmif_writel(arb, cmd, inf_reg->ch_send); > > + > > +out: > > + if (ret < 0) > > + return ret; > > + > > + return 0; > > Simplify to > > out: > return ret; > Thanks, I will update it in the next patch. > > +} > > + > > +static const struct pmif_data mt6873_pmif_arb = { > > + .regs = mt6873_regs, > > + .spmimst_regs = mt6873_spmi_regs, > > + .soc_chan = 2, > > +}; > > + > > +static int mtk_spmi_probe(struct platform_device *pdev) > > +{ > > + struct pmif *arb; > > + struct spmi_controller *ctrl; > > + int err, i; > > + u32 chan_offset; > > + > > + ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb)); > > + if (!ctrl) > > + return -ENOMEM; > > + > > + arb = spmi_controller_get_drvdata(ctrl); > > + arb->data = of_device_get_match_data(&pdev->dev); > > Use device_get_match_data() instead please. > Thanks, I will change to use device_get_match_data in the next patch. > > + if (!arb->data) { > > + err = -EINVAL; > > + dev_err(&pdev->dev, "Cannot get drv_data\n"); > > + goto err_put_ctrl; > > + } > > + > > + arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif"); > > + if (IS_ERR(arb->base)) { > > + err = PTR_ERR(arb->base); > > + dev_err(&pdev->dev, "pmif failed to get the remappped memory\n"); > > Please drop print as the API already prints errors for every problem. > Thanks, I will update it in the next patch. > > + goto err_put_ctrl; > > + } > > + > > + arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst"); > > + if (IS_ERR(arb->spmimst_base)) { > > + err = PTR_ERR(arb->spmimst_base); > > + dev_err(&pdev->dev, "spmimst failed to get the remappped memory\n"); > > Please drop print as the API already prints errors for every problem. > Thanks, I will update it in the next patch. > > + goto err_put_ctrl; > > + } > > + > > + arb->nclks = ARRAY_SIZE(pmif_clock_names); > > + if (arb->nclks > PMIF_MAX_CLKS) { > > + err = -EINVAL; > > + dev_err(&pdev->dev, "exceed the max clock numbers\n"); > > Do we really care? The dt schema should be checking this instead of the > driver. > Thanks, I will remove the check in the next patch. > > + goto err_put_ctrl; > > + } > > + > > + for (i = 0; i < arb->nclks; i++) > > + arb->clks[i].id = pmif_clock_names[i]; > > +
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index 2874b6c26028..ea5703f6e544 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -34,4 +34,14 @@ config SPMI_MSM_PMIC_ARB This is required for communicating with Qualcomm PMICs and other devices that have the SPMI interface. +config SPMI_MTK_PMIF + tristate "Mediatek SPMI Controller (PMIC Arbiter)" + help + If you say yes to this option, support will be included for the + built-in SPMI PMIC Arbiter interface on Mediatek family + processors. + + This is required for communicating with Mediatek PMICs and + other devices that have the SPMI interface. + endif diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile index 6e092e6f290c..0b21aaffcbb9 100644 --- a/drivers/spmi/Makefile +++ b/drivers/spmi/Makefile @@ -6,3 +6,5 @@ obj-$(CONFIG_SPMI) += spmi.o obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o +obj-$(CONFIG_SPMI_MTK_PMIF) += spmi-mtk-pmif.o + diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c new file mode 100644 index 000000000000..94c45d46ab0c --- /dev/null +++ b/drivers/spmi/spmi-mtk-pmif.c @@ -0,0 +1,465 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2021 MediaTek Inc. + +#include <linux/clk.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/spmi.h> + +#define SWINF_IDLE 0x00 +#define SWINF_WFVLDCLR 0x06 + +#define GET_SWINF(x) (((x) >> 1) & 0x7) + +#define PMIF_CMD_REG_0 0 +#define PMIF_CMD_REG 1 +#define PMIF_CMD_EXT_REG 2 +#define PMIF_CMD_EXT_REG_LONG 3 + +#define PMIF_DELAY_US 10 +#define PMIF_TIMEOUT_US (10 * 1000) + +#define PMIF_CHAN_OFFSET 0x5 + +#define PMIF_MAX_CLKS 3 + +#define SPMI_OP_ST_BUSY 1 + +struct ch_reg { + u32 ch_sta; + u32 wdata; + u32 rdata; + u32 ch_send; + u32 ch_rdy; +}; + +struct pmif_data { + const u32 *regs; + const u32 *spmimst_regs; + u32 soc_chan; +}; + +struct pmif { + void __iomem *base; + void __iomem *spmimst_base; + struct ch_reg chan; + struct clk_bulk_data clks[PMIF_MAX_CLKS]; + u32 nclks; + const struct pmif_data *data; +}; + +static const char * const pmif_clock_names[] = { + "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux", +}; + +enum pmif_regs { + PMIF_INIT_DONE, + PMIF_INF_EN, + PMIF_ARB_EN, + PMIF_CMDISSUE_EN, + PMIF_TIMER_CTRL, + PMIF_SPI_MODE_CTRL, + PMIF_IRQ_EVENT_EN_0, + PMIF_IRQ_FLAG_0, + PMIF_IRQ_CLR_0, + PMIF_IRQ_EVENT_EN_1, + PMIF_IRQ_FLAG_1, + PMIF_IRQ_CLR_1, + PMIF_IRQ_EVENT_EN_2, + PMIF_IRQ_FLAG_2, + PMIF_IRQ_CLR_2, + PMIF_IRQ_EVENT_EN_3, + PMIF_IRQ_FLAG_3, + PMIF_IRQ_CLR_3, + PMIF_IRQ_EVENT_EN_4, + PMIF_IRQ_FLAG_4, + PMIF_IRQ_CLR_4, + PMIF_WDT_EVENT_EN_0, + PMIF_WDT_FLAG_0, + PMIF_WDT_EVENT_EN_1, + PMIF_WDT_FLAG_1, + PMIF_SWINF_0_STA, + PMIF_SWINF_0_WDATA_31_0, + PMIF_SWINF_0_RDATA_31_0, + PMIF_SWINF_0_ACC, + PMIF_SWINF_0_VLD_CLR, + PMIF_SWINF_1_STA, + PMIF_SWINF_1_WDATA_31_0, + PMIF_SWINF_1_RDATA_31_0, + PMIF_SWINF_1_ACC, + PMIF_SWINF_1_VLD_CLR, + PMIF_SWINF_2_STA, + PMIF_SWINF_2_WDATA_31_0, + PMIF_SWINF_2_RDATA_31_0, + PMIF_SWINF_2_ACC, + PMIF_SWINF_2_VLD_CLR, + PMIF_SWINF_3_STA, + PMIF_SWINF_3_WDATA_31_0, + PMIF_SWINF_3_RDATA_31_0, + PMIF_SWINF_3_ACC, + PMIF_SWINF_3_VLD_CLR, +}; + +static const u32 mt6873_regs[] = { + [PMIF_INIT_DONE] = 0x0000, + [PMIF_INF_EN] = 0x0024, + [PMIF_ARB_EN] = 0x0150, + [PMIF_CMDISSUE_EN] = 0x03B4, + [PMIF_TIMER_CTRL] = 0x03E0, + [PMIF_SPI_MODE_CTRL] = 0x0400, + [PMIF_IRQ_EVENT_EN_0] = 0x0418, + [PMIF_IRQ_FLAG_0] = 0x0420, + [PMIF_IRQ_CLR_0] = 0x0424, + [PMIF_IRQ_EVENT_EN_1] = 0x0428, + [PMIF_IRQ_FLAG_1] = 0x0430, + [PMIF_IRQ_CLR_1] = 0x0434, + [PMIF_IRQ_EVENT_EN_2] = 0x0438, + [PMIF_IRQ_FLAG_2] = 0x0440, + [PMIF_IRQ_CLR_2] = 0x0444, + [PMIF_IRQ_EVENT_EN_3] = 0x0448, + [PMIF_IRQ_FLAG_3] = 0x0450, + [PMIF_IRQ_CLR_3] = 0x0454, + [PMIF_IRQ_EVENT_EN_4] = 0x0458, + [PMIF_IRQ_FLAG_4] = 0x0460, + [PMIF_IRQ_CLR_4] = 0x0464, + [PMIF_WDT_EVENT_EN_0] = 0x046C, + [PMIF_WDT_FLAG_0] = 0x0470, + [PMIF_WDT_EVENT_EN_1] = 0x0474, + [PMIF_WDT_FLAG_1] = 0x0478, + [PMIF_SWINF_0_ACC] = 0x0C00, + [PMIF_SWINF_0_WDATA_31_0] = 0x0C04, + [PMIF_SWINF_0_RDATA_31_0] = 0x0C14, + [PMIF_SWINF_0_VLD_CLR] = 0x0C24, + [PMIF_SWINF_0_STA] = 0x0C28, + [PMIF_SWINF_1_ACC] = 0x0C40, + [PMIF_SWINF_1_WDATA_31_0] = 0x0C44, + [PMIF_SWINF_1_RDATA_31_0] = 0x0C54, + [PMIF_SWINF_1_VLD_CLR] = 0x0C64, + [PMIF_SWINF_1_STA] = 0x0C68, + [PMIF_SWINF_2_ACC] = 0x0C80, + [PMIF_SWINF_2_WDATA_31_0] = 0x0C84, + [PMIF_SWINF_2_RDATA_31_0] = 0x0C94, + [PMIF_SWINF_2_VLD_CLR] = 0x0CA4, + [PMIF_SWINF_2_STA] = 0x0CA8, + [PMIF_SWINF_3_ACC] = 0x0CC0, + [PMIF_SWINF_3_WDATA_31_0] = 0x0CC4, + [PMIF_SWINF_3_RDATA_31_0] = 0x0CD4, + [PMIF_SWINF_3_VLD_CLR] = 0x0CE4, + [PMIF_SWINF_3_STA] = 0x0CE8, +}; + +enum spmi_regs { + SPMI_OP_ST_CTRL, + SPMI_GRP_ID_EN, + SPMI_OP_ST_STA, + SPMI_MST_SAMPL, + SPMI_MST_REQ_EN, + SPMI_REC_CTRL, + SPMI_REC0, + SPMI_REC1, + SPMI_REC2, + SPMI_REC3, + SPMI_REC4, + SPMI_MST_DBG, +}; + +static const u32 mt6873_spmi_regs[] = { + [SPMI_OP_ST_CTRL] = 0x0000, + [SPMI_GRP_ID_EN] = 0x0004, + [SPMI_OP_ST_STA] = 0x0008, + [SPMI_MST_SAMPL] = 0x000c, + [SPMI_MST_REQ_EN] = 0x0010, + [SPMI_REC_CTRL] = 0x0040, + [SPMI_REC0] = 0x0044, + [SPMI_REC1] = 0x0048, + [SPMI_REC2] = 0x004c, + [SPMI_REC3] = 0x0050, + [SPMI_REC4] = 0x0054, + [SPMI_MST_DBG] = 0x00fc, +}; + +static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg) +{ + return readl(arb->base + arb->data->regs[reg]); +} + +static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg) +{ + writel(val, arb->base + arb->data->regs[reg]); +} + +static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg) +{ + writel(val, arb->spmimst_base + arb->data->spmimst_regs[reg]); +} + +static bool pmif_is_fsm_vldclr(struct pmif *arb) +{ + u32 reg_rdata; + + reg_rdata = pmif_readl(arb, arb->chan.ch_sta); + return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR; +} + +static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid) +{ + struct pmif *arb = spmi_controller_get_drvdata(ctrl); + u32 rdata, cmd; + int ret; + + /* Check the opcode */ + if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP) + return -EINVAL; + + cmd = opc - SPMI_CMD_RESET; + + mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL); + ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA], + rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY, + PMIF_DELAY_US, PMIF_TIMEOUT_US); + if (ret < 0) + dev_err(&ctrl->dev, "timeout, err = %d\n", ret); + + return ret; +} + +static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, + u16 addr, u8 *buf, size_t len) +{ + struct pmif *arb = spmi_controller_get_drvdata(ctrl); + struct ch_reg *inf_reg; + int ret; + u32 data, cmd; + + /* Check for argument validation. */ + if (sid & ~0xf) { + dev_err(&ctrl->dev, "exceed the max slv id\n"); + return -EINVAL; + } + + if (len > 4) { + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len); + return -EINVAL; + } + + if (opc >= 0x60 && opc <= 0x7f) + opc = PMIF_CMD_REG; + else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f)) + opc = PMIF_CMD_EXT_REG_LONG; + else + return -EINVAL; + + /* Wait for Software Interface FSM state to be IDLE. */ + inf_reg = &arb->chan; + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], + data, GET_SWINF(data) == SWINF_IDLE, + PMIF_DELAY_US, PMIF_TIMEOUT_US); + if (ret < 0) { + /* set channel ready if the data has transferred */ + if (pmif_is_fsm_vldclr(arb)) + pmif_writel(arb, 1, inf_reg->ch_rdy); + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); + goto out; + } + + /* Send the command. */ + cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr; + pmif_writel(arb, cmd, inf_reg->ch_send); + + /* + * Wait for Software Interface FSM state to be WFVLDCLR, + * read the data and clear the valid flag. + */ + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], + data, GET_SWINF(data) == SWINF_WFVLDCLR, + PMIF_DELAY_US, PMIF_TIMEOUT_US); + if (ret < 0) { + dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n"); + goto out; + } + + data = pmif_readl(arb, inf_reg->rdata); + memcpy(buf, &data, len); + pmif_writel(arb, 1, inf_reg->ch_rdy); + +out: + if (ret < 0) + return ret; + + return 0; +} + +static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, + u16 addr, const u8 *buf, size_t len) +{ + struct pmif *arb = spmi_controller_get_drvdata(ctrl); + struct ch_reg *inf_reg; + int ret; + u32 data, cmd; + + if (len > 4) { + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len); + return -EINVAL; + } + + /* Check the opcode */ + if (opc >= 0x40 && opc <= 0x5F) + opc = PMIF_CMD_REG; + else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37)) + opc = PMIF_CMD_EXT_REG_LONG; + else if (opc >= 0x80) + opc = PMIF_CMD_REG_0; + else + return -EINVAL; + + /* Wait for Software Interface FSM state to be IDLE. */ + inf_reg = &arb->chan; + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], + data, GET_SWINF(data) == SWINF_IDLE, + PMIF_DELAY_US, PMIF_TIMEOUT_US); + if (ret < 0) { + /* set channel ready if the data has transferred */ + if (pmif_is_fsm_vldclr(arb)) + pmif_writel(arb, 1, inf_reg->ch_rdy); + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); + goto out; + } + + /* Set the write data. */ + memcpy(&data, buf, len); + pmif_writel(arb, data, inf_reg->wdata); + + /* Send the command. */ + cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr; + pmif_writel(arb, cmd, inf_reg->ch_send); + +out: + if (ret < 0) + return ret; + + return 0; +} + +static const struct pmif_data mt6873_pmif_arb = { + .regs = mt6873_regs, + .spmimst_regs = mt6873_spmi_regs, + .soc_chan = 2, +}; + +static int mtk_spmi_probe(struct platform_device *pdev) +{ + struct pmif *arb; + struct spmi_controller *ctrl; + int err, i; + u32 chan_offset; + + ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb)); + if (!ctrl) + return -ENOMEM; + + arb = spmi_controller_get_drvdata(ctrl); + arb->data = of_device_get_match_data(&pdev->dev); + if (!arb->data) { + err = -EINVAL; + dev_err(&pdev->dev, "Cannot get drv_data\n"); + goto err_put_ctrl; + } + + arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif"); + if (IS_ERR(arb->base)) { + err = PTR_ERR(arb->base); + dev_err(&pdev->dev, "pmif failed to get the remappped memory\n"); + goto err_put_ctrl; + } + + arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst"); + if (IS_ERR(arb->spmimst_base)) { + err = PTR_ERR(arb->spmimst_base); + dev_err(&pdev->dev, "spmimst failed to get the remappped memory\n"); + goto err_put_ctrl; + } + + arb->nclks = ARRAY_SIZE(pmif_clock_names); + if (arb->nclks > PMIF_MAX_CLKS) { + err = -EINVAL; + dev_err(&pdev->dev, "exceed the max clock numbers\n"); + goto err_put_ctrl; + } + + for (i = 0; i < arb->nclks; i++) + arb->clks[i].id = pmif_clock_names[i]; + + err = devm_clk_bulk_get(&pdev->dev, arb->nclks, arb->clks); + if (err) { + dev_err(&pdev->dev, "Failed to get clocks: %d\n", err); + goto err_put_ctrl; + } + + err = clk_bulk_prepare_enable(arb->nclks, arb->clks); + if (err) { + dev_err(&pdev->dev, "Failed to enable clocks: %d\n", err); + goto err_put_ctrl; + } + + ctrl->cmd = pmif_arb_cmd; + ctrl->read_cmd = pmif_spmi_read_cmd; + ctrl->write_cmd = pmif_spmi_write_cmd; + + chan_offset = PMIF_CHAN_OFFSET * arb->data->soc_chan; + arb->chan.ch_sta = PMIF_SWINF_0_STA + chan_offset; + arb->chan.wdata = PMIF_SWINF_0_WDATA_31_0 + chan_offset; + arb->chan.rdata = PMIF_SWINF_0_RDATA_31_0 + chan_offset; + arb->chan.ch_send = PMIF_SWINF_0_ACC + chan_offset; + arb->chan.ch_rdy = PMIF_SWINF_0_VLD_CLR + chan_offset; + + platform_set_drvdata(pdev, ctrl); + + err = spmi_controller_add(ctrl); + if (err) + goto err_domain_remove; + + return 0; + +err_domain_remove: + clk_bulk_disable_unprepare(arb->nclks, arb->clks); +err_put_ctrl: + spmi_controller_put(ctrl); + return err; +} + +static int mtk_spmi_remove(struct platform_device *pdev) +{ + struct spmi_controller *ctrl = platform_get_drvdata(pdev); + struct pmif *arb = spmi_controller_get_drvdata(ctrl); + + clk_bulk_disable_unprepare(arb->nclks, arb->clks); + spmi_controller_remove(ctrl); + spmi_controller_put(ctrl); + return 0; +} + +static const struct of_device_id mtk_spmi_match_table[] = { + { + .compatible = "mediatek,mt6873-spmi", + .data = &mt6873_pmif_arb, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, mtk_spmi_match_table); + +static struct platform_driver mtk_spmi_driver = { + .driver = { + .name = "spmi-mtk", + .of_match_table = of_match_ptr(mtk_spmi_match_table), + }, + .probe = mtk_spmi_probe, + .remove = mtk_spmi_remove, +}; +module_platform_driver(mtk_spmi_driver); + +MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>"); +MODULE_DESCRIPTION("MediaTek SPMI Driver"); +MODULE_LICENSE("GPL");
Add spmi support for MT6873/8192. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> --- changes since v9: - No change. --- drivers/spmi/Kconfig | 10 + drivers/spmi/Makefile | 2 + drivers/spmi/spmi-mtk-pmif.c | 465 +++++++++++++++++++++++++++++++++++ 3 files changed, 477 insertions(+) create mode 100644 drivers/spmi/spmi-mtk-pmif.c